{"title":"Dosing aids","description":"\u003ch2 id=\"speakable-headline\"\u003eDosing aids get concentrate from the canister into the spray bottle, measured\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\u003cp\u003e\u003cem\u003eWhat are dosing aids in car care? Tools that get concentrate out of a bottle or canister and into a spray bottle, pump sprayer or bucket in a measured amount: canister opener, dispensing tap, dosing cap with dip tube, measuring cylinder and measuring jug. They make your cleaner's mixing ratio repeatable — they don't replace it.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eDosing aids\u003c\/strong\u003e in car care are the kit that sits between concentrate and working solution — not the dosing ball from the laundry aisle. They open the container, get cleaner or shampoo out of the canister and measure exactly the amount the manufacturer specifies for its mixing ratio. What that means for you: the tenth time you mix a spray bottle, it holds the same mix as the first, not a guess by eye.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe scale sets the smallest amount.\u003c\/strong\u003e The Koch-Chemie measuring cylinder is marked in 5 ml steps, the measuring jug in 20 ml steps. If you need to measure a few millilitres of high-strength concentrate, you need the finer scale; on the coarse one it stays a guess.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap it, don't tip it.\u003c\/strong\u003e A dispensing tap replaces the canister cap, and you fill from the canister lying on its side without lifting it. Which tap fits is decided by the thread on the canister opening — and so by the canister's brand, not how many litres it holds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure right at the cap.\u003c\/strong\u003e A dosing cap with a dip tube replaces the lid of the 1-litre bottle and fills its measuring chamber as soon as you squeeze the bottle. If you mix a concentrate several times a week, you skip the measuring jug and the rinsing afterwards every single time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Never read a mixing ratio as a percentage. 1:10 means 1 part concentrate plus 10 parts water, 11 parts in total. For 1 litre of ready-to-use solution, that's about 91 ml concentrate and 909 ml water, not 100 and 900 ml. Koch-Chemie does the maths the same way in its own dilution guide: 1:5 is 10 ml of chemical to 50 ml of water. The cleaner decides what's right. The dosing aid just makes sure you hit it every time.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eA dosing aid turns the manufacturer's spec into a repeatable amount\u003c\/h3\u003e\n\u003cp\u003eA dosing aid is the tool that gets concentrate from a bottle or canister into a bucket, spray bottle or pump sprayer in exactly the amount your cleaner's mixing ratio calls for. The concentrate arrives in a 1-litre bottle or a canister and gets diluted with water before use. The finished mix you spray on or pour into the bucket is called the working solution or in-use solution.\u003c\/p\u003e\n\u003cp\u003eWithout measuring, the mix tips one of two ways. Koch-Chemie states in its dilution guide that chemicals mixed too strong or at the wrong concentration can attack vehicle parts. Mix too weak, on the other hand, and you lose cleaning power, which you then make up for with more pressure on the towel or brush. You only notice either in the result, not when filling up.\u003c\/p\u003e\n\u003cp\u003eA cleaner often has more than one mix. Koch-Chemie recommends in its dilution guide matching the dilution to how dirty things are; for Pol Star, the application sheet gives a range of 1:5 to 1:20 depending on soiling. Work like that and you mix two bottles from one concentrate: a stronger one for heavy dirt and a weaker one for routine maintenance. Only when measured do the two mixes stay properly separate — by eye, they blur into each other.\u003c\/p\u003e\n\n\u003ch3\u003eFour tools cover the route from canister to spray bottle\u003c\/h3\u003e\n\u003cp\u003eDosing aids cover the route from bulk container to working bottle with four types of tool: canister opener, dispensing tap, dosing cap with dip tube and measuring vessel, each responsible for exactly one step of the chain. Which of them you need depends on the container your concentrate comes in.\u003c\/p\u003e\n\u003cp\u003eThe canister opener comes first and opens the caps on big containers without a struggle. Then the dispensing tap takes over — SONAX calls it a drain tap. It screws onto the canister opening in place of the cap, and you draw off the concentrate instead of lifting and tipping the full canister. SONAX and Koch-Chemie both name the same purpose: clean, safe and economical dispensing.\u003c\/p\u003e\n\u003cp\u003eThe dosing cap with dip tube works on the 1-litre bottle. It replaces the original cap, and a thin tube reaches down to the bottom of the bottle. Squeeze the bottle and concentrate rises into a measuring chamber, usually with a scale. Handy: you read the amount off the top of the cap, open the lid and pour, without picking up a second vessel.\u003c\/p\u003e\n\u003cp\u003eThe measuring vessel is the open option, as a measuring cylinder or measuring jug with scales of different fineness. It fits every bottle and every canister and costs you one extra step in return. Which cap goes on which bottle is covered in depth on \u003ca href=\"\/collections\/dosierkappen\"\u003eDosing caps\u003c\/a\u003e, while taps and canister threads are sorted on \u003ca href=\"\/collections\/auslaufhaehne\"\u003eDispensing taps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAt the end of the chain is the vessel that gets the working solution onto the car, and that choice belongs under \u003ca href=\"\/collections\/spruehflaschen-druckpumpzerstaeuber\"\u003eSpraying \u0026amp; foaming\u003c\/a\u003e: hand bottle, pump sprayer or \u003ca href=\"\/collections\/schaumsprueher\"\u003eFoam Sprayer\u003c\/a\u003e. A pump that draws concentrate straight out of the canister doesn't belong in this category. Here we measure, we don't pump.\u003c\/p\u003e\n\n\u003ch3\u003eThread, chemistry and scale decide, not canister size\u003c\/h3\u003e\n\u003cp\u003eA dosing aid has to fit three ways: the thread of the bottle or canister, the chemistry running through it, and the smallest amount you want to measure with it. If one of the three is off, it drips, won't hold or measures too coarsely.\u003c\/p\u003e\n\u003cp\u003eCanister openings come in several standardised thread sizes, and they don't fit each other. Which size a canister has depends on the manufacturer, not the litres. SONAX builds its drain tap for its own 3- and 5-litre canisters. Koch-Chemie has its own taps for the 5-litre and for the 10- and 30-litre canisters, and according to dealer information the 5-litre tap has a different thread from the SONAX one.\u003c\/p\u003e\n\u003cp\u003eThat's exactly the question we get in chat: which dispensing tap fits my canister? The honest answer starts with the canister, not the tap. Check the brand and container size and look at the thread size of the canister opening before you order. The same goes for dosing caps — they're system accessories for one family of bottles and won't automatically sit on other brands' bottles.\u003c\/p\u003e\n\u003cp\u003eThe second axis is chemistry, and approvals vary widely here. According to its manufacturer, one dosing cap is only meant for alkaline products and shampoos, explicitly not for acids or solvents. Another is described by its manufacturer as resistant to acids, alkalis and solvents. So before an acidic wheel cleaner runs through a cap, check what the cap is approved for.\u003c\/p\u003e\n\u003cp\u003eThe third axis is quantity. The smaller the dose, the finer the scale you read it off has to be. High-strength concentrates in the range of a few millilitres need a fine measuring vessel or a cap with tight markings. A tap, on the other hand, delivers bigger portions — its stream is too coarse for a single millilitre.\u003c\/p\u003e\n\n\u003ch3\u003e1:10 means 1 part concentrate to 10 parts water\u003c\/h3\u003e\n\u003cp\u003eTo convert a mixing ratio into millilitres, divide the target volume by the total number of parts and multiply the result by the concentrate share. The first number is the concentrate, the second the water.\u003c\/p\u003e\n\u003cp\u003eFor a 500 ml spray bottle at 1:4, that's 500 divided by 5, so 100 ml concentrate and 400 ml water. A litre at 1:100 needs about 10 ml of concentrate — exactly the range a 5 ml scale is made for. So 1:5 means one sixth concentrate, not one fifth.\u003c\/p\u003e\n\u003cp\u003eNot every manufacturer does the maths this way. For its dosing cap, SONAX gives 50 ml of cleaner for 1:20 in a 1-litre pump sprayer, so it's apparently calculating from the container volume; strictly by parts, it would be about 48 ml. Both readings make sense in their own right. What counts, then, is the method on the label or in the data sheet of the cleaner you're using. Shampoo dilutions for the bucket are under \u003ca href=\"\/collections\/autoshampoo\"\u003eCar shampoo\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhen mixing from a canister, a fixed order helps. Screw the tap on hand-tight and lay the canister so the tap sits at the bottom. Tighten it with a tool and the seal deforms and the thread drips. If the stream glugs, no air is getting in. Then check the canister's venting, because negative pressure can make a canister collapse inwards while you're decanting.\u003c\/p\u003e\n\u003cp\u003eWater goes into the spray bottle first, then the measured concentrate. The other way round, cleaners and shampoos containing surfactants foam up as you top up, and the bottle overflows before the amount is right. In the bucket for a hand wash, foam is what you want, so that order doesn't apply there. Finally, label the bottle with product name, dilution and fill date, as described under \u003ca href=\"\/collections\/spruehflasche\"\u003eSpray bottles\u003c\/a\u003e. A drinks bottle is a no-go as a working bottle.\u003c\/p\u003e\n\n\u003ch3\u003eThe measuring cylinder resolves the five millilitres the jug can't\u003c\/h3\u003e\n\u003cp\u003eOur range of dosing aids covers every step of the chain, from the cap for the bottle to tap and canister key to measuring vessels with scales of varying fineness. What matters isn't the brand but the step you're measuring at.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/sonax-profiline-dosierkappe-dosierhilfe\"\u003eSONAX PROFILINE Dosing Cap\u003c\/a\u003e comes in a six-pack and fits the SONAX 1-litre round bottle. Before filling, open the lid slightly so pressure can escape, then squeeze the chamber full. The dip tube reaches the bottom, so according to the product description it still works with the bottle tilted and at a low fill level. It's less suited to thick products like waxes, pastes or gels, and SONAX doesn't state a chamber volume.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/sonax-profiline-kunststoffablasshahn-fur-3-l-5-l-kanister-zubehor\"\u003eSONAX PROFILINE Plastic Drain Cock\u003c\/a\u003e goes on the SONAX 3- and 5-litre canisters. It's the tool for when you regularly refill spray bottles or buckets from the canister. According to the product description, it's meant for portions between 50 and 500 ml and doses less precisely than a cap. So for the single dose of a high-strength concentrate, tap into a measuring vessel and measure there.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/koch-chemie-measuring-cylinder-messzylinder\"\u003eKoch-Chemie Measuring Cylinder\u003c\/a\u003e is a 500 ml measuring cylinder with a 5 ml scale, intended by Koch-Chemie for precise dosing of high-strength concentrates. The \u003ca href=\"\/products\/koch-chemie-graduated-jug-messbecher\"\u003eKoch-Chemie Graduated Jug\u003c\/a\u003e is the matching measuring jug, with 2 litres and a 20 ml scale, for dosing and pre-diluting cleaning concentrates. In plain terms: the cylinder measures, the jug mixes.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/koch-chemie-canister-opener-kanisteroeffner\"\u003eKoch-Chemie Canister Opener\u003c\/a\u003e is the canister key in the chain, described by Koch-Chemie as a triple key for opening 5-, 10-, 30- and 200-litre containers without effort. The manufacturers don't state which plastic is used in taps, measuring vessels and openers or which chemicals they tolerate, so we don't state it either. What's documented is volume, scale and container sizes — pick by those.\u003c\/p\u003e\n\n\u003ch3\u003eDose one concentrate often? Get the cap. Otherwise a measuring vessel will do\u003c\/h3\u003e\n\u003cp\u003eWhich dosing aid you need depends on how often you mix which concentrate and whether it comes from a bottle or a canister. The question of the best tool only comes after that.\u003c\/p\u003e\n\u003cp\u003eThe obvious objection: surely a measuring jug is enough? For occasional mixing, that's true. If you mix several concentrates now and then, one measuring vessel does the job well, because it fits every bottle and doesn't need a cap per product. The same vessel serves hand bottle, bucket and \u003ca href=\"\/collections\/druckpumpzerstaeuber\"\u003ePressure pump atomizer\u003c\/a\u003e — you just rinse it between two concentrates. If the amount is a few millilitres, like the roughly 10 ml for 1:100 in a litre, reach for the measuring cylinder instead of the jug.\u003c\/p\u003e\n\u003cp\u003eThe cap pays off on a bottle you dose often and in small amounts, like the interior cleaner for your weekly round. Then you skip the detour via the measuring vessel every time you mix. Two limits come with it: the cap only fits its own bottle system, and not every cap is approved for acids or solvents.\u003c\/p\u003e\n\u003cp\u003eIf you buy in canisters, you need the full chain: opener, a tap with the right thread and a measuring vessel for the actual amount. For the measuring cylinder, Koch-Chemie also mentions pinning down exact wash-chemical consumption. For professional detailers and businesses that want to know usage and cost per vehicle, that's the hard number behind the costing.\u003c\/p\u003e\n\u003cp\u003eThe first time you mix from a canister, the maths and measuring take longer than you'd think. That's normal and gets quicker with every bottle. Write down the millilitre values of your regular mixes once — on a note by the shelf or straight on the canister — and you won't need to calculate next time. After that, dosing aids just take the measuring off your hands.\u003c\/p\u003e\n\u003cp\u003eNo dosing aid changes how much concentrate is right. That's decided by the manufacturer of your cleaner and how dirty things are. What the dosing aid does is something you only notice after months: the bottle you mix in March holds the same mix as the one from October. Only then are you comparing cleaners with each other, not two random mixes.\u003c\/p\u003e","products":[{"product_id":"koch-chemie-dosing-cap-dosierkappe-flaschen-270mm","title":"\"Dosing Cap\" dosing cap for 1000ml \/ 270mm bottles","description":"\u003ch2 id=\"speakable-headline\"\u003eDose concentrates dead-on with the scale on the Koch-Chemie Dosing Cap\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Dosing Cap? A 270 mm riser cap with a 20 ml measuring scale in 5 ml steps for dosing concentrates straight out of the Koch-Chemie 1-litre bottle. Not suitable for acidic or solvent-based products, and it doesn't fit canisters of 5 litres or more.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Dosing Cap\u003c\/strong\u003e is a dosing cap from Koch-Chemie (item no. 9998149) that works with a built-in 270 mm riser tube and a clear measuring scale from 5 to 20 millilitres in 5 ml steps. It replaces the standard closure on the 1-litre concentrate bottles and turns any bottle into a squeeze-driven dosing dispenser — no measuring cup, no splashing over the edge of the bench, no soaked labels.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-dosing-cap_hero.png?v=1777296505\" alt=\"Daniel from Detailing1 dosing Koch-Chemie Pol Star with the Dosing Cap dosing cap\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScale in 5 ml steps up to 20 millilitres.\u003c\/strong\u003e One squeeze of the bottle and the concentrate climbs through the 270 mm riser tube into the clear measuring neck. You read off the amount and pour it straight into the spray bottle — for a Pol Star Po dilution at 1:10 that's exactly 10 millilitres, not \"about a good glug\" that you'll never hit again on the next bucket of wash.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRiser tube can be trimmed for 500 ml bottles.\u003c\/strong\u003e From the factory the tube sits at 270 millimetres, a perfect fit for the Koch-Chemie 1-litre standard bottle. For 500 ml spray bottles you trim it down to around 175 millimetres with scissors — the same cap then keeps working on the smaller bottles, so you don't buy a second one and you don't give up a second slot on the shelf.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLasts 100 uses and up.\u003c\/strong\u003e With alkaline products and car shampoos the plastic holds up for several years day-to-day — with a weekly Pol Star wash that's a good two years of service. Spread across the 3.49 EUR purchase price, your dosing cost lands under 4 cents per use. For a tool that saves between 5 and 15 millilitres of concentrate per wash, that's a purchase that pays itself off in two weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Two mistakes cost you scale accuracy. First mistake: squeezing the bottle too hard — the concentrate shoots past the 20 ml line. Squeeze short and stop at the line instead. Second mistake: not flipping the little outlet flap on top open before you pour — then a vacuum pulls the liquid back, the bottle crackles, and the pour runs uneven. Manufacturer instruction: \"Open cap when dispensing.\" So always flip the flap open first, then pour.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eScrew on. Squeeze. Read off the scale.\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDosing Cap\u003c\/strong\u003e screws onto the 1-litre concentrate bottle, you give the bottle a quick squeeze from the side — the concentrate climbs through the 270 mm riser tube into the clear measuring neck and stops at the 5 ml line you want.\u003c\/p\u003e\n\n\u003cp\u003eIn detail it goes like this: unscrew the original closure, push the Dosing Cap with its riser tube into the bottle, screw it down clockwise. Hold the bottle upright and gently squeeze the long sides with both hands — you don't need any force, a controlled squeeze of about a centimetre is enough. As soon as the concentrate reaches the first 5 ml line, ease off the pressure. Need more? Just give it another quick squeeze.\u003c\/p\u003e\n\n\u003cp\u003eReal-world amounts from day-to-day work: for a Pol Star Po dilution at 1:10 for upholstery cleaning you dose 10 millilitres and add it to 90 millilitres of warm water. For Green Star \"Gs\" as a pre-cleaner you dilute 1:5, so 20 millilitres of concentrate in 80 millilitres of water — a full scale fill. For Active Foam \"Af\" in the foam lance container 1:20 is normal, so 5 millilitres per 100 millilitres of water. With the 5 ml resolution you're bang on the line for all three of these standard mixes.\u003c\/p\u003e\n\n\u003cp\u003eWhen you pour, open the little flap on top, hold the bottle at an angle and let the measured concentrate run into your \u003ca href=\"\/products\/koch-chemie-hdpe-zylinderflasche-28-400-spruehflasche-1000ml\"\u003eempty HDPE spray bottle\u003c\/a\u003e or mixing container. Top up with water, fit the spray head, done. If you mix several dilutions per session, you save yourself the measuring cup and the leftover in the cup that otherwise gets spilled or tipped away.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-dosing-cap_anwendung.png?v=1777296518\" alt=\"Concentrate climbing into the 5 ml scale of the Koch-Chemie Dosing Cap dosing cap\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAlkaline and shampoo: yes. Acids and solvents: no.\u003c\/h3\u003e\n\u003cp\u003eThe Dosing Cap is expressly cleared by the manufacturer for alkaline cleaning concentrates and car shampoos. Acids and solvents attack the plastic of the scale over time — that's the most important limit on where you use it.\u003c\/p\u003e\n\n\u003cp\u003eIn concrete terms: across the Koch-Chemie range the cap fits the alkaline all-purpose cleaners Green Star \"Gs\", multi-purpose cleaner \"Mzr\" and Allround Surface Cleaner \"Asc\", the pre-cleaners Pre-Foam efficient \"Pfe\" and Pre-Wash B \"Pb\", Active Foam \"Af\" for the foam lance, the car shampoo \"As\", the NanoMagicShampoo \"Nms\" plus the upholstery care Pol Star \"Po\" and the plastic-care concentrates. That covers around eighty percent of the typical Koch-Chemie detailing workflow.\u003c\/p\u003e\n\n\u003cp\u003eWhere the cap is not suitable is Triple Acid Star \"Ta\" and other acidic wheel cleaners, Reactive Rust Remover \"Rrr\", Magic Wheel Cleaner \"Mwc\", and solvent-based products like stain remover \"Fw\" or tar remover. Acids soften the scale markings, solvents can make the plastic brittle — either way you lose the measuring accuracy after a few uses. For those products stick with the original closure or work with a measuring cup.\u003c\/p\u003e\n\n\u003cp\u003eThe second clear limit is the bottle. The riser tube is matched to 270 millimetres, so it fits the standard 1-litre Koch-Chemie bottle and, once trimmed, the 500 ml spray bottles. It doesn't fit the 5-litre, 10-litre or 25-litre canisters — those have a different closure diameter and too much height for the riser tube.\u003c\/p\u003e\n\n\u003cp\u003eIf you want to dose straight out of the 5-litre canister, you need a different solution like the \u003ca href=\"\/products\/carpro-measure-cap-dosierkappe\"\u003eCarPro Measure Cap\u003c\/a\u003e, which screws onto 28\/400-thread spray bottles and works on a decant principle rather than dosing straight from the storage container.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-dosing-cap_ergebnis.png?v=1777308590\" alt=\"Concentrate mixing system with Koch-Chemie Dosing Cap HDPE bottle and spray head\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eIf you dose Koch-Chemie concentrates, you want it.\u003c\/h3\u003e\n\u003cp\u003eThe Dosing Cap pays for itself from the second concentrate on the shelf. If you keep Pol Star, Green Star and Pre-Foam in 1-litre bottles, you mix two to three dilutions per detailing session — eyeballing it burns more concentrate over the year than the cap costs.\u003c\/p\u003e\n\n\u003cp\u003eIt breaks down into three profiles. For the hobby detailer with two or three concentrate bottles the cap is a one-off 3.49 EUR outlay that makes your own mixes repeatable — a 1:10 dilution is genuinely 1:10 next time, not \"a touch too weak\" or \"a bit too foamy\".\u003c\/p\u003e\n\n\u003cp\u003eFor the semi-pro and the workshop detailer who mixes several dilutions a day, the cap saves concentrate — a rough 15 ml guess instead of a measured 10 ml dose adds up to two or three litres of Pol Star too much over the season. The cap makes less sense if you only use a single ready-mixed spray product and don't dilute any concentrates at all — then you simply don't need it.\u003c\/p\u003e\n\n\u003cp\u003eOn the Detailing1 shelf, three building blocks make one complete concentrate mixing system: the \u003cstrong\u003eKoch-Chemie Dosing Cap\u003c\/strong\u003e on the concentrate bottle, the \u003ca href=\"\/products\/koch-chemie-hdpe-zylinderflasche-28-400-spruehflasche-1000ml\"\u003eHDPE cylinder bottle 1 litre\u003c\/a\u003e as the mixing container and the \u003ca href=\"\/products\/koch-chemie-spruehkopf-spruehflasche-set\"\u003espray head \"Star\" with spray bottle\u003c\/a\u003e as the finished set. You dose from the concentrate into the HDPE bottle, top up with water, fit the spray head — three moves, a repeatable mix, no measuring cup in the sink. All in, the system costs you under twelve euros and saves you buying every separate spray-bottle component on its own.\u003c\/p\u003e\n\n\u003cp\u003eIf you mix several concentrates in rotation, label the HDPE bottle with a permanent marker along the bottom edge: dilution and date. Sounds trivial, but day-to-day it's exactly what sits between a repeatable workflow and a \"not sure what's in here any more\" mix.\u003c\/p\u003e\n\n\u003cp\u003eThe Dosing Cap itself stays on the concentrate bottle, the spray head stays on the HDPE bottle — you only swap the concentrate, and you always measure on the same 5 ml scale. That's the one Detailing1 tip that has nothing to do with the product and everything to do with the routine around it: standardisation beats improvisation, every time.\u003c\/p\u003e\n\n\u003cp\u003eThe handful of buyer reviews for the cap confirm the point that matters most in the product's logic: the fit on the Koch-Chemie 1-litre bottles is spot on. Verified buyers report matter-of-factly that the cap \"fits\", which on a riser-tube system with a fixed length spec is all that counts.\u003c\/p\u003e\n\n\u003cp\u003eThe real Detailing1 value isn't in the cap, it's in the discipline. Once you've dosed with a 5 ml scale, you never go back to eyeballing — and only then do you notice how much concentrate used to vanish into the bucket water, because a 1:5 dilution was really a 1:3 and the whole litre of Pol Star was gone after 8 washes instead of 20.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-dosing-cap_lineup.png?v=1777296541\" alt=\"Koch-Chemie Dosing Cap dosing cap macro with 5-20 ml scale and riser tube\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"Default Title","offer_id":48818350031183,"sku":"D1-KCX-9998149","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998149__1714225866.png?v=1714252294"},{"product_id":"koch-chemie-auslaufhahn-koch-chemie-kanister","title":"Outlet Tap for Koch-Chemie Canisters","description":"\u003ch2\u003eClean dosing from canisters with the Koch-Chemie outlet tap\u003c\/h2\u003e\n\u003cp\u003eThe Koch-Chemie outlet tap is one of those accessories you don't think about until you're without it - and then you miss it every single pour. It's built specifically for Koch-Chemie plastic canisters and lets you draw liquid in a controlled, clean way, without slopping product everywhere.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise dosing:\u003c\/strong\u003e the tap lets you decant exactly where you want it, which really pays off when you're handling pricey detailing chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo spills:\u003c\/strong\u003e the design keeps liquid where it should be, so your bench stays clean and you don't burn through product you never used.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to handle:\u003c\/strong\u003e it fits straight onto the canister and works without fuss, so the whole job goes faster.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eA must for anyone serious about detailing\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie outlet tap is the right tool when you want a precise, controlled pour. It's easy to work with and gives you a proper handle on the flow, which is exactly why it earns its keep in day-to-day car care and cleaning.\u003c\/p\u003e\n\u003ch3\u003eFits different canister sizes\u003c\/h3\u003e\n\u003cp\u003eWhether it's a small 5-litre or a big 30-litre canister, this tap adapts to the container and covers a wide range of jobs. That flexibility makes it a genuinely useful bit of kit to have on the shelf.\u003c\/p\u003e\n\u003ch3\u003eBuilt to last\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie tap is robustly made and stands up to regular, heavy use in professional car care. It lasts, so it's the kind of small investment that quietly pays you back.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"5 liters","offer_id":48903423263055,"sku":"D1-KCX-999032","price":7.99,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48903423295823,"sku":"D1-KCX-999131","price":7.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/999032__1715609486.png?v=1715626795"},{"product_id":"carpro-measure-cap-dosierkappe","title":"CarPro \"Measure Cap\" Dosing Cap for 1000ml \/ 500ml Bottles (28\/400)","description":"\u003ch2\u003eCarPro \"Measure Cap\" – dosing cap for 1000ml \/ 500ml bottles (28\/400)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCarPro \"Measure Cap\"\u003c\/strong\u003e is the easy answer to dosing concentrates accurately. It fits any bottle with a 28mm thread and lets you measure out exactly the amount of product you need, no fuss. Whether you're mixing up a cleaner or a care product, the Measure Cap gets your dilution spot on every time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e Screw it onto the bottle, squeeze out the amount you want and pour it straight into your dilution bottle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e Fits any bottle with a 28mm thread – ideal for a whole range of CarPro products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical-resistant:\u003c\/strong\u003e The cap stands up to solvents, alcohol, acids and alkalis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAccurate measuring made easy\u003c\/h3\u003e\n\u003cp\u003eWith the \u003cstrong\u003eCarPro Measure Cap\u003c\/strong\u003e, dosing concentrated cleaners and care products becomes a no-brainer. This clever dosing aid lets you measure out exactly the product you need, without spilling a drop. Screw it on, squeeze, and pour the liquid into your dilution bottle. The cap stops more product coming out than you want, so your dosing stays precise.\u003c\/p\u003e\n\u003ch3\u003eThe perfect partner for your CARPRO products\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eCarPro Measure Cap\u003c\/strong\u003e is designed to make working with CarPro products easier. Whether you're using \u003cstrong\u003eCarPro Reset Shampoo\u003c\/strong\u003e, \u003cstrong\u003eHydrO2\u003c\/strong\u003e or other concentrated cleaners and care products, this dosing cap makes sure you always hit the right mix. That matters if you want the products to perform at their best – and it means no concentrate goes down the drain.\u003c\/p\u003e\n\u003ch3\u003eTough and long-lasting\u003c\/h3\u003e\n\u003cp\u003eMade from quality materials, the \u003cstrong\u003eCarPro Measure Cap\u003c\/strong\u003e resists a range of chemicals, including solvents, alcohol, acids and alkalis. That toughness means the cap keeps working even with regular use and lasts a long time. Versatile and hard-wearing, the Measure Cap earns its place in any car care enthusiast's kit.\u003c\/p\u003e","brand":"CarPro","offers":[{"title":"28mm thread (CarPro 1000ml \/ 500ml bottles)","offer_id":49463109157199,"sku":"D1-CRP-MECA","price":9.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/carpro-measure-cap-dosierkappe.png?v=1723626985"},{"product_id":"sonax-profiline-dosierkappe-dosierhilfe","title":"PROFILINE Dosing Cap Dosing Aid","description":"\u003c!-- BLOCK 1: body_html --\u003e\n\u003ch2\u003eControlled dosing of cleaning concentrates — the SONAX PROFILINE dosing cap on the job\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX PROFILINE dosing cap stand out? This dosing aid with a dip tube replaces the original cap on your cleaning bottles and lets you pull defined amounts in a precise, controlled way — so you get the most out of your concentrates in a professional detailing operation.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn a professional detailing operation you work with a whole range of cleaning concentrates — all-purpose cleaners, interior cleaners, wheel cleaners, shampoo concentrates, all of which have to be diluted to the right ratio before you use them. The \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e is the tool that turns that everyday routine into precise, repeatable, cost-effective work. The dosing system with a dip tube replaces the bottle's original cap and lets you pull a defined amount per press — instead of free-pouring with no real control over how much goes in. Each pack holds 6 caps, so you can run several bottle sizes and product types at once. If you work with several SONAX PROFILINE concentrates side by side, a set of dosing caps is the obvious accessory to grab.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise dosing stops product waste and keeps your results consistent.\u003c\/strong\u003e A common slip in operations without a dosing aid is over-dosing the cleaning concentrate: a too-generous shot into the bucket or spray bottle doesn't clean any better (at the right dilution it's already optimal), it just burns through far more product than you need. The SONAX PROFILINE dosing cap puts a stop to that — the dip tube and dosing mechanism push out a defined amount per press, even when the bottle isn't fully upright. That saves product, cuts your running costs and keeps the cleaning solution at the right ratio every time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCleaner, safer handling of cleaning chemicals day-to-day.\u003c\/strong\u003e The dip tube reaches right down to the bottom of the bottle, so you can pull product even when the bottle isn't fully upright or there's only a little left. The upside: no awkward tilting of half-empty bottles, no spilling concentrate when you draw it out. In a professional setting, where you handle concentrated and sometimes skin-irritating chemicals, controlled draw is a real contribution to safety and to protecting your work surfaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6 in a set — for running several product bottles at once.\u003c\/strong\u003e The SONAX PROFILINE dosing cap set holds 6 caps you can fit on 6 different bottles at the same time. In a well-stocked detailing operation you've typically got 3–6 concentrates on the go at once — all-purpose cleaner, interior cleaner, wheel cleaner, shampoo concentrate, bug remover, glass cleaner. With a dosing cap on each bottle every product is ready to go, without unscrewing the original cap before every draw. That speeds up the workflow and stops mix-ups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The SONAX PROFILINE dosing cap really earns its keep paired with the \u003ca href=\"\/products\/sonax-profiline-multistar-all-purpose-cleaner-universalreiniger\"\u003eSONAX PROFILINE MultiStar All-Purpose-Cleaner\u003c\/a\u003e as your all-purpose concentrate: depending on the job, MultiStar runs at dilutions from 1:5 to 1:100 — precise dosing makes or breaks that ratio. It's worth calibrating the dose per press once against a test amount and noting the result for your common ratios (e.g. \"3 strokes into 500 ml = 1:X\"). When you use the dosing cap on the SONAX PROFILINE PFA cart, we'd label the product bottles so nothing gets mixed up during a quick draw — especially important when several people work off the same cart.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eDosing system with a dip tube — how the SONAX PROFILINE dosing cap works\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e works on the pump-dispenser principle with a dip tube: you screw the cap onto the bottle (or push it on, depending on the bottle neck), with the built-in dip tube reaching down to the bottom of the bottle. Press the dosing mechanism and a defined amount of liquid is drawn up the dip tube and pushed out through the cap's outlet. The dip tube makes sure the liquid is pulled from the very bottom of the bottle — even with the bottle tilted or low on contents, the system works reliably, with no air pockets or pressure loss.\u003c\/p\u003e\n\u003cp\u003eA key advantage over a simple screw cap with a plain spout is how repeatable the dispensed amount is: every press of the dosing cap puts out the same defined amount, no matter how far you tilt the bottle or how fast you press. That lets you build dosing standards into the operation — after a short while you know how many strokes you need for the dilution you want in a bucket, a spray bottle or a measuring jug. That repeatability is the foundation for consistent cleaning results across every job and every member of staff.\u003c\/p\u003e\n\u003cp\u003eThe material compatibility of the SONAX PROFILINE dosing cap is built around SONAX PROFILINE cleaning concentrates and similar professional car care products. The materials used stand up to the typical pH values and ingredients of cleaning concentrates. For storage and use with strongly acidic products (e.g. low-pH wheel cleaners), check compatibility case by case. For neutral to mildly alkaline cleaners the dosing cap is usually fully suitable.\u003c\/p\u003e\n\n\u003ch3\u003eCost-effective use of concentrates — what precise dosing means on the floor\u003c\/h3\u003e\n\u003cp\u003eThe cost angle of dosing cleaning concentrates correctly often gets underrated day-to-day. A concentrate like the \u003ca href=\"\/products\/sonax-profiline-multistar-all-purpose-cleaner-universalreiniger\"\u003eSONAX PROFILINE MultiStar\u003c\/a\u003e is built for a wide dilution range from 1:5 to 1:100 — meaning one litre of concentrate at 1:100 gives you 100 litres of ready-to-use cleaner. Free-pour with no control and you wipe out that economic potential fast: shoot 30 ml into the bucket instead of the recommended 10 ml by accident and you triple the consumption per job with no gain in cleaning power — over-dosing isn't better, and with some products it's actually worse (harder rinsing or residue, for instance).\u003c\/p\u003e\n\u003cp\u003eThe SONAX PROFILINE dosing cap makes that maths simple: you calibrate the number of strokes for the dilution you want once, then hit that standard safely and repeatably. In an operation washing 20–50 cars a day and getting through several concentrates, the spend on dosing aids pays for itself fast through lower concentrate use. With a concentrate at 1:20 and a daily use of 10 litres of working solution that's 500 ml of concentrate a day — every 20% over-dose means 100 ml extra a day, which adds up to serious extra cost over a year.\u003c\/p\u003e\n\u003cp\u003eFor operations with several staff, standardised dosing via the dosing cap is also a quality-control tool: different people dose differently, as you'd expect, when there's no clear dosing system. With the SONAX PROFILINE dosing cap the ratio comes out the same and repeatable for everyone, which feeds straight into consistent cleaning results and reliable product costing.\u003c\/p\u003e\n\n\u003ch3\u003eWhere the SONAX PROFILINE dosing cap brings the most — which products it suits\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e earns its keep most on concentrates with a wide dilution range and on products run at different strengths for different jobs. All-purpose cleaner concentrates like the MultiStar All-Purpose-Cleaner are the classic case: for light dirt (1:50–1:100), medium dirt (1:10–1:20) and heavy cleaning (1:5–1:10) you use the same base solution at different dilutions. The dosing cap lets you switch quickly between those strengths without guessing the consumption again each time.\u003c\/p\u003e\n\u003cp\u003eThe dosing cap is handy for interior cleaner concentrates too: interior cleaners get used at different strengths depending on the surface (fabric, leather, plastic) and how dirty it is. A dosing cap on the concentrate lets you quickly fill a spray bottle at the strength you want, without opening and pouring the whole bottle. For the work itself — seat by seat, panel by panel — that's a noticeable gain in comfort and efficiency.\u003c\/p\u003e\n\u003cp\u003eThe dosing cap is less suited to high-viscosity products (waxes, pastes, gels), which won't feed up the dip tube, or only with difficulty. The system is tuned for liquid to lightly viscous concentrates — water-based cleaners, shampoo concentrates, liquid deep cleaners and the like. If you're unsure whether it suits a specific product, a simple test does it: fit the dosing cap and give it a couple of quick presses to see whether the product feeds without trouble.\u003c\/p\u003e\n\n\u003ch3\u003eThe SONAX PROFILINE dosing cap as part of the PFA cart system — fitting it in\u003c\/h3\u003e\n\u003cp\u003eWithin the SONAX PROFILINE PFA cart accessory system the \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e has a specific role: where the \u003ca href=\"\/products\/sonax-profiline-kunststoffablasshahn-fur-3-l-5-l-kanister-zubehor\"\u003eSONAX PROFILINE plastic drain tap\u003c\/a\u003e is built for drawing from 3-litre and 5-litre canisters, the dosing cap is meant for smaller bottles (typically 1 litre). The two dosing aids complement each other: big canisters on the lower shelf of the PFA cart with a drain tap for the base cleaners you reach for often; small bottles with a dosing cap for specialist products you need in smaller amounts.\u003c\/p\u003e\n\u003cp\u003eThat structured take on the dosing system matters most in operations with several staff: when everyone knows which product sits on which shelf of the PFA cart and how the dosing cap works, getting new staff up to speed is easier and the risk of mis-dosing drops. One consistent dosing system is a practical step towards a tidy, efficient operation.\u003c\/p\u003e\n\u003cp\u003eTo use the dosing cap straight at the \u003ca href=\"\/products\/sonax-profiline-eimer-fur-pfa-wagen-zubehor\"\u003eSONAX PROFILINE bucket PFA cart\u003c\/a\u003e, here's the routine we'd run: fill the bucket (clean water in the amount you want), then press the dosing caps of the concentrate bottles you need and dose straight into the bucket. That saves measuring out in jugs in between and cuts the number of steps to a ready-to-use cleaning solution to a minimum.\u003c\/p\u003e\n\n\u003ch3\u003eBuy the SONAX PROFILINE dosing cap — availability, compatibility and our take\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e comes as a set of 6 — enough to run 6 different product bottles at once, or to mix active caps with spares. The price per set is modest, and the dosing caps are reusable and can be moved onto other bottles after a product change, as long as the threads match. If a cap wears out or gets damaged, replacement sets are easy to reorder.\u003c\/p\u003e\n\u003cp\u003eCompatibility: the dosing cap is matched to the bottle necks of the SONAX PROFILINE range. Before using it with other makers' products, check the thread compatibility — not all bottle necks are standardised, and a cap that doesn't fit won't seal reliably. Within the SONAX PROFILINE range the dosing cap is built for the common 1-litre bottles and should fit there with no adjustment.\u003c\/p\u003e\n\u003cp\u003eBottom line: the SONAX PROFILINE dosing cap is a small accessory that pays off both in cost and in practice for any operation working regularly with SONAX PROFILINE concentrates. Six in a set, precise dosing via the dip-tube system and easy handling make it a solid addition for any professional detailing operation looking to optimise product use and standardise its workflow.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"6 pieces","offer_id":57345155072335,"sku":"D1-SNX-2991000","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-dosierkappe_6-stueck.png?v=1774736535"},{"product_id":"sonax-profiline-kunststoffablasshahn-fur-3-l-5-l-kanister-zubehor","title":"PROFILINE Plastic Drain Cock Dosing Aid","description":"\u003ch2\u003eClean, safe dispensing from big canisters — SONAX PROFILINE KunststoffAblasshahn\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX PROFILINE KunststoffAblasshahn stand out? This plastic drain tap with a DIN fitting lets you draw cleaning concentrates from 3-litre and 5-litre canisters cleanly and in measured amounts — no lifting, no pouring, no spills.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn a professional detailing operation, 3-litre and 5-litre canisters are everyday kit. All-purpose cleaners, pre-cleaners, shampoo concentrates and interior cleaners get bought in these big containers because they work out cheaper and are easier to handle logistically than a shelf full of small bottles. The snag comes when you need to get the product out: a full 5-litre canister weighs five kilos plus the canister itself — heaving it up, tipping it and dosing from it for every single measure is awkward on the body, imprecise, and something spills more often than not. The \u003cstrong\u003eSONAX PROFILINE KunststoffAblasshahn\u003c\/strong\u003e fixes that at the root: the drain system with its DIN fitting goes into the canister neck once, and from then on you draw off whatever amount you want straight from the tap — no lifting, no tipping, no spills. The canister stays put on the shelf or in the PFA-Wagen; the contents flow on command.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDIN standard fitting for 3-litre and 5-litre canisters with a standard neck.\u003c\/strong\u003e The SONAX PROFILINE KunststoffAblasshahn uses the DIN 45 standard thread, which matches the neck thread on standard 3-litre and 5-litre plastic canisters — including the typical 5-litre SONAX PROFILINE concentrate canisters. Once it's screwed in, the tap sits tight and secure; the seal stops any leaking even with the tap closed and the canister not fully upright. The plastic the tap is made from is built to handle contact with common cleaning concentrates (neutral to alkaline pH values).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eErgonomic dispensing with no lifting or tipping of heavy canisters.\u003c\/strong\u003e A 5-litre canister of cleaning concentrate weighs five to six kilos when full — lift and tip that several times a day for dosing and it adds up to a real strain on the body, especially when you've got several canisters on the go at once. With the SONAX PROFILINE KunststoffAblasshahn the canister stays parked on its shelf spot or in the lower tray of the PFA-Wagen. You dispense by simply opening the tap and catching the product in a container, bucket or spray bottle — a one-handed job that takes no force and no awkward posture.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise, controlled dosing straight from the big container.\u003c\/strong\u003e Unlike pouring straight out of the canister, the drain tap gives you controlled dosing: you hold the tap open until you've got the amount you want, then close it. No overpouring, no dribbling down the canister neck, no wiping concentrate off the side of the canister. Day-to-day, where every dosing job costs time and every drop of concentrate is money, that accuracy is a genuine win — and it helps you keep your mixing ratios consistent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Getting the most out of the SONAX PROFILINE KunststoffAblasshahn: sit the canister on the lower shelf of the \u003ca href=\"\/products\/sonax-profiline-pfa-wagen-schwarz-leer-werkstattwagen\"\u003eSONAX PROFILINE PFA-Wagen\u003c\/a\u003e and screw the tap into the side of the canister that faces you. That way you're dispensing at working height without having to bend down. Tip: park a \u003ca href=\"\/products\/sonax-profiline-eimer-fur-pfa-wagen-zubehor\"\u003eSONAX PROFILINE PFA-Wagen bucket\u003c\/a\u003e right under the tap — now filling the bucket runs itself: open the tap, the bucket fills, close the tap. If you run several products in big containers, we'd label the canisters on the PFA-Wagen (product name + dilution) so nothing gets mixed up during a quick draw. The first time you fit the tap to a new canister, check the seal is seated right and that the tap is fully tight when closed — if it weeps, you can nip up the sealing washer or swap it out.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eHow the KunststoffAblasshahn is built and how it works — what makes dispensing reliable\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE KunststoffAblasshahn\u003c\/strong\u003e works on the principle of a classic drain tap: a rotating tap body with an integrated seal. You screw the tap body into the canister thread — as it goes in, the built-in sealing washer is compressed between the tap body and the canister neck and makes a liquid-tight joint. Closed (lever across the flow direction), a sealing seat blocks the liquid flow completely; open (lever in line with the flow direction), the sealing element clears the bore and the liquid runs out downward under gravity.\u003c\/p\u003e\n\u003cp\u003eLetting air into the canister as you draw (venting) can slow the flow on some tap designs that have no dedicated air channel. For the best flow, tip the canister slightly forward or make a small opening in the original cap (if it's still on) so air can follow in behind. Alternatively, switch the canister over to the tap entirely and take the original cap off — then the canister vents itself through the tap design.\u003c\/p\u003e\n\u003cp\u003eThe material chosen for the KunststoffAblasshahn is designed for common cleaning chemistry in the neutral to mildly alkaline range. For strongly alkaline products (pH \u0026gt; 12) or strongly acidic products (pH \u0026lt; 2) you should check material compatibility case by case — very aggressive chemistry can attack the tap body over time and hurt the seal. For the typical SONAX PROFILINE concentrates in the neutral to alkaline range, the tap is suitable without any restrictions.\u003c\/p\u003e\n\n\u003ch3\u003eFitting it into the working day — where the KunststoffAblasshahn earns its keep\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE KunststoffAblasshahn\u003c\/strong\u003e really comes into its own in operations that regularly draw larger amounts from 3-litre or 5-litre canisters. Detailing studios with high vehicle throughput, working through several litres of all-purpose cleaner, pre-cleaner or shampoo concentrate a day, benefit from being able to fold the dispensing into their workflow without breaking their rhythm: bucket under the tap, tap open, carry on working, tap closed — the filling happens alongside whatever else you're doing.\u003c\/p\u003e\n\u003cp\u003eIn operations running a car-wash service, where the cleaning concentrate gets drawn from the canister several times a day, the tap noticeably cuts the total daily time spent dosing. If someone dosing from the canister ten times in an eight-hour shift saves a minute on each draw over lifting and tipping, that's ten minutes a day per person — across 250 working days a year, nearly 42 hours of working time freed up for productive jobs.\u003c\/p\u003e\n\u003cp\u003eFor mobile detailing services that drive out to the customer in a van and carry their cleaning products on board, the KunststoffAblasshahn is worth its weight: a canister with the tap fitted can be anchored safely in the vehicle and used for on-site dosing straight out of the van. No more heaving and tipping heavy canisters, which is better both on the body and for safety inside a loaded vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eKunststoffAblasshahn vs. dosing cap — the right dosing system for each canister type\u003c\/h3\u003e\n\u003cp\u003eAcross the SONAX PROFILINE dosing-aids range, the \u003cstrong\u003eSONAX PROFILINE KunststoffAblasshahn\u003c\/strong\u003e and the \u003ca href=\"\/products\/sonax-profiline-dosierkappe-dosierhilfe\"\u003eSONAX PROFILINE dosing cap\u003c\/a\u003e round each other out into a complete dosing setup for different container sizes. The dosing cap with its dip tube is made for 1-litre bottles and similar small containers: compact, light and dialled in for quick single doses out of handy bottles. The cap's pump mechanism gives you precise single portions, but it's slow for large amounts — fill a whole bucket from a 1-litre bottle and you're in for a lot of strokes.\u003c\/p\u003e\n\u003cp\u003eThe drain tap, on the other hand, is built for 3- and 5-litre canisters and set up for pulling larger volumes: it opens a full flow bore and lets bigger amounts run out fast. For filling a whole bucket with a pre-dilution mix, the drain tap is far quicker than a dosing cap. The single-dose precision is lower with the drain tap than with the dosing cap — it isn't tuned to deliver exactly 5 ml, but to draw off 50–500 ml quickly.\u003c\/p\u003e\n\u003cp\u003eRunning both dosing aids in the shop makes sense: concentrates you draw in big amounts regularly (all-purpose cleaner, shampoo) go in the 5-litre canister with the drain tap; specialised products dosed in small, precise amounts (a ceramic topper or glass-cleaner concentrate, say) go in 1-litre bottles with the dosing cap. That way the dosing system covers everything the shop needs, efficiently.\u003c\/p\u003e\n\n\u003ch3\u003eWhich SONAX PROFILINE concentrates suit the KunststoffAblasshahn — product compatibility at a glance\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE KunststoffAblasshahn\u003c\/strong\u003e is matched to every standard SONAX PROFILINE cleaning concentrate available in 3-litre or 5-litre canisters with a DIN standard neck. Those are, above all, the concentrates that come in the biggest canisters and get drawn in single measured amounts most often day-to-day. In concrete terms, the tap is a great fit for products like SONAX PROFILINE MultiClean Alkaline pre-cleaner in the 5-litre canister, which gets drawn in larger amounts very often on the job — for pre-cleaning whole vehicle flanks, filling spray bottles for engine-bay washing, or mixing up wash-prep batches. SONAX PROFILINE CarShampoo in the 5-litre version and SONAX PROFILINE Citrus Power as a pre-cleaner in big canisters also gain a lot from a drain tap that takes the friction out of the daily dosing.\u003c\/p\u003e\n\u003cp\u003eFor use with water-based concentrates in the neutral to mildly alkaline range, the plastic tap body is fully compatible with no caveats. Water-based products with a pH between 5 and 12 — which is the vast majority of SONAX PROFILINE cleaning and care concentrates — can be dosed through the tap indefinitely, with no material fatigue, seal wear or crusting risk. With solvent-based products or strongly acidic specialist cleaners (pH below 3), on the other hand, run a compatibility check before you use it permanently, since aggressive solvents can attack the plastic of the tap body over the long run.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE KunststoffAblasshahn\u003c\/strong\u003e is especially efficient paired with the SONAX PROFILINE PFA-Wagen and its matching system parts. Stand a 5-litre concentrate canister with the tap fitted in the lower tray of the PFA-Wagen and the whole dosing setup is compact and mobile: roll the cart over to whatever vehicle or work area you're on and draw the concentrate right there. No walking back to the shelf, no heavy lifting, no spills en route. For shops running several cleaning products at once, you can extend the idea to every further canister — each canister gets its own SONAX PROFILINE KunststoffAblasshahn and sits ready to hand on the PFA-Wagen or the shelf.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the SONAX PROFILINE KunststoffAblasshahn — availability, fitting and our take\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE KunststoffAblasshahn\u003c\/strong\u003e comes as a single component (1 piece). If you've got several big containers on the go at once, it's worth ordering a few taps — one per canister that's in permanent use. That lets you leave the taps fitted in their canisters rather than swapping them between containers — each canister keeps its tap and doesn't have to be opened or reworked when you draw from it.\u003c\/p\u003e\n\u003cp\u003eFitting note: the tap screws in clockwise. Make sure the seal is positioned right and that the tap is hand-tight (but not wrenched down with a tool). For a lasting tight joint you can wrap thread-sealing tape (PTFE tape) around the tap thread before screwing it in — worth doing with some canister materials and tolerances. Once it's fitted, quickly check the tap is tight when closed before you top up the canister or put it on the shelf.\u003c\/p\u003e\n\u003cp\u003eBottom line: the SONAX PROFILINE KunststoffAblasshahn is a simple, cheap and genuinely handy add-on for anyone dosing regularly from 3-litre or 5-litre canisters. It takes the strain of heavy canisters off your body, improves dosing accuracy and saves working time over the long run. A small outlay with a measurable practical payoff in the everyday workflow.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1 piece \/ 3-liter \/ 5-liter canister","offer_id":57345157202255,"sku":"D1-SNX-4973410","price":6.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-kunststoffablasshahn-fur-3-l-und-5-l-kunststoffkanister_1-stueck.png?v=1774736612"},{"product_id":"koch-chemie-graduated-jug-messbecher","title":"Graduated Jug with Volume Scale","description":"","brand":"Koch-Chemie","offers":[{"title":"1 Stück \/ 2 Liter","offer_id":58722637381967,"sku":"D1-KCX-999136","price":12.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-graduated-jug-messbecher.png?v=1788950438"},{"product_id":"koch-chemie-measuring-cylinder-messzylinder","title":"Measuring Cylinder with Volume Scale","description":"","brand":"Koch-Chemie","offers":[{"title":"1 Stück \/ 500 ml","offer_id":58722638397775,"sku":"D1-KCX-999106","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-measuring-cylinder-messzylinder.png?v=1788950489"},{"product_id":"koch-chemie-canister-opener-kanisteroeffner","title":"Canister Opener","description":"","brand":"Koch-Chemie","offers":[{"title":"1 Stück","offer_id":58722639806799,"sku":"D1-KCX-999094","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-canister-opener-kanisteroeffner.png?v=1788950533"}],"url":"https:\/\/detiiling1.com\/collections\/dosierhilfen.oembed","provider":"Detailing1","version":"1.0","type":"link"}