{"title":"Pressure pump atomizer","description":"\u003ch2 id=\"speakable-headline\"\u003ePressure pump atomizers for a steady spray mist without the hand lever\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat does a pressure pump atomizer get you? You pump the tank up to pressure once and then keep spraying evenly for minutes, no trigger and no tired wrist. At Detailing1 the range runs from handy one-litre units to twelve-litre tanks, each matched to the chemistry you run.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003ePressure pump atomizers\u003c\/strong\u003e are sprayers with a sealed tank in which a piston pump builds an air cushion above the liquid. That stored pressure pushes the solution through the nozzle for as long as you hold the lever on the handle open. The mist stays fine and even instead of getting weaker with every stroke. They replace the hand spray bottle wherever larger areas, longer dwell times or aggressive cleaners come into play.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne pressure build-up covers a whole side of the car.\u003c\/strong\u003e Twenty to thirty pump strokes are enough to bring the tank up to working pressure. After that you work continuously instead of putting in effort for every spray. If you've ever pre-treated a car with a hand bottle, you'll know the difference by the third wheel at the latest.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThe mist stays fine, the chemistry goes further.\u003c\/strong\u003e Fine droplets settle as a continuous film on the surface instead of running off in thick streams. The same amount of pre-cleaner covers noticeably more panel, and the dwell time runs equally long everywhere.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThe seal decides which chemistry can go in.\u003c\/strong\u003e Units with fluoroelastomer seals handle acids, alkalis and solvent-based products, standard seals are designed for mild and water-based cleaners. A look at this one detail decides whether a unit lasts for years or starts leaking after a season.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e We regularly get questions about units that suddenly won't hold pressure or have a dripping nozzle. In almost every case the unit sat on the shelf for weeks with residual pressure, often still with cleaner in the tank. The seal is then permanently under tension, deforms and no longer seals cleanly afterwards. Release the pressure via the safety valve after every use, rinse the tank with clean water and just rest the lid on loosely. It takes two minutes and is the difference between a unit that lasts one season and one that lasts ten.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePre-pumped pressure instead of a trigger pull for every spray\u003c\/h3\u003e\n\n\u003cp\u003eA pressure pump atomizer stores the spraying energy in the tank instead of drawing it fresh from your wrist for every single spray.\u003c\/p\u003e\n\n\u003cp\u003eThe lid holds a piston pump. Pull the handle up and push it back down, and it forces air into the sealed tank, compressing the cushion above the liquid. That cushion typically sits at two to three bar and acts like a loaded spring pressing on the solution.\u003c\/p\u003e\n\n\u003cp\u003eOpen the lever on the spray handle and that pressure pushes the liquid through the dip tube and the nozzle. What that means for you: the mist is there the moment you pull the lever, and it stays at the same quality until the air cushion noticeably drops.\u003c\/p\u003e\n\n\u003cp\u003eThe hand spray bottle works the other way round. It creates pressure afresh with every pull, which is why the mist pulses in the rhythm of your hand. Between two pulls it collapses, and what lands on the paint is more a series of splashes than a film.\u003c\/p\u003e\n\n\u003cp\u003eThe difference becomes clear with volume. A mid-size car needs about a litre of spray solution for pre-cleaner, wheels and door sills, depending on how dirty it is. With a hand bottle that's several hundred pulls, with the pressure sprayer one pumping session and a second one when the pressure drops.\u003c\/p\u003e\n\n\u003cp\u003eTopping up the pressure is still part of it, and to be honest it's the only real bit of effort in the routine. As soon as the mist turns coarser and the reach drops, ten strokes are due. Units with a compressor valve take even that off your hands, because you fill them at the tyre inflation station or from a compressor.\u003c\/p\u003e\n\n\u003ch3\u003eA fine mist covers evenly and saves chemicals\u003c\/h3\u003e\n\n\u003cp\u003eThe quality of the spray pattern decides how much cleaner you need and how evenly it works over the dwell time.\u003c\/p\u003e\n\n\u003cp\u003eTechnically it's about droplet spectrum, meaning the size distribution of the droplets leaving the nozzle. Think of it as the difference between drizzle and a downpour: drizzle wets every spot, a downpour runs off in streams. In practice that means less product for the same area.\u003c\/p\u003e\n\n\u003cp\u003eMost units can be adjusted at the nozzle from a wide hollow cone to a focused jet. The cone is the choice for bonnet, sides and bumpers, the narrower jet for wheel arches, wheel barrels and sills, where you want to reach deep in a targeted way.\u003c\/p\u003e\n\n\u003cp\u003eFor pre-cleaners and bug removers, even wetting is crucial, because a continuous wet film dries more slowly than individual thick drops. What you'll find under \u003ca href=\"\/collections\/vorreiniger\"\u003epre-cleaner\u003c\/a\u003e only does its job over three to five minutes of contact time, and you only get that with a film that stays put.\u003c\/p\u003e\n\n\u003cp\u003eWhat we keep seeing at Detailing1: customers expect double the consumption when they switch from a hand sprayer to a pressure unit, and then find the opposite. The canister lasts longer, because nothing runs down the door in streaks and ends up in the gravel anymore.\u003c\/p\u003e\n\n\u003cp\u003eA fine mist has a downside that comes with the job. The smaller the droplets, the longer they hang in the air, and you don't want to breathe in alkaline pre-cleaners or acidic wheel products. Work outdoors, keep the wind at your back and wear a mask with aggressive chemistry.\u003c\/p\u003e\n\n\u003ch3\u003eViton or standard: the seal decides how long it lasts\u003c\/h3\u003e\n\n\u003cp\u003eTwo units that look identical on the outside can differ fundamentally in one point you only notice after weeks: the material of their seals.\u003c\/p\u003e\n\n\u003cp\u003eThe key word is FKM, usually sold under the brand name Viton. It's a fluoroelastomer, meaning a rubber in which fluorine atoms wrap around the molecular chains like armour. How you notice: acids, alkalis and solvents barely get at the material, and it stays elastic instead of swelling.\u003c\/p\u003e\n\n\u003cp\u003eStandard seals made of NBR or EPDM are much cheaper and perfectly adequate for water-based, mild cleaners. But if an acidic wheel cleaner or a strongly alkaline pre-cleaner stays in contact with them long-term, they swell, go soft and at some point stop holding pressure.\u003c\/p\u003e\n\n\u003cp\u003eManufacturers solve this with separate product lines. The \u003ca href=\"\/products\/ik-sprayers-ik-alk-15-druckpumpzerstaeuber-alkalisch\"\u003eiK Sprayers „iK Alk\" 1.5 Pressure Sprayer (Alkaline)\u003c\/a\u003e is designed for alkaline cleaners, and the \u003ca href=\"\/products\/sonax-profiline-druckpumpzerstauber-fur-sauren-alkalien-spruhflasche\"\u003eSONAX PROFILINE DruckpumpZerstäuber „Acids+Alkalis\" Spray Bottle\u003c\/a\u003e carries its application right in its name.\u003c\/p\u003e\n\n\u003cp\u003eThe coloured rings that come with the iK units are more than decoration. They mark which unit carries which chemistry. From what we see day-to-day, that's the most effective protection against the mistake that costs most seals: accidentally filling wheel cleaner into the unit meant for the interior.\u003c\/p\u003e\n\n\u003cp\u003eIt's not just the seals that count, tank, dip tube and nozzle have to suit the chemistry too. A polypropylene housing handles different products than a polyethylene one, and metal parts in the spray path don't like acid. That's why the professional lines list the application range in the data sheet, not in the small print.\u003c\/p\u003e\n\n\u003cp\u003eSo there's no one unit for everything, and that's not bad news. Two separate tanks, one for acidic and one for alkaline products, both last longer than a single unit that everything runs through in turn. Rinse through with clean water after every use, nozzle included.\u003c\/p\u003e\n\n\u003cp\u003eThe connection between tank and handle deserves a second look too. A short hose forces you to lug the unit around, a longer one lets it stand on the ground while you work on the roof. On units from five litres up, that's exactly what decides whether working with it is comfortable.\u003c\/p\u003e\n\n\u003ch3\u003ePick the capacity by car and how far you walk\u003c\/h3\u003e\n\n\u003cp\u003eTank size depends less on the size of the car than on how often you want to walk back for a refill.\u003c\/p\u003e\n\n\u003cp\u003eIn the handy range, units hold around one to two litres. The \u003ca href=\"\/products\/solo-cleanline-303-a-b-pumpsprueher-1-25-liter\"\u003esolo CLEANLine (303 A \/ B) Pump Sprayer 1.25 Litre\u003c\/a\u003e and the \u003ca href=\"\/products\/solo-cleanline-304-a-b-pumpsprueher-2-liter\"\u003esolo CLEANLine (304 A \/ B) Pump Sprayer 2 Litres\u003c\/a\u003e sit lightly in the hand and cover wheels, door sills and interior without you having to put them down.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/products\/ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2\"\u003eiK Sprayers „iK Multi\" Pro 2 Pressure Sprayer (incl. colour coding)\u003c\/a\u003e plays in the same class and is the classic for a weekend detailing session. The 360-degree version, the \u003ca href=\"\/products\/ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2-360\"\u003eiK Sprayers „iK Multi\" Pro 2 360° pressure sprayer (with colour coding)\u003c\/a\u003e, also sprays upside down, so it gets into wheel arches and under edges.\u003c\/p\u003e\n\n\u003cp\u003eFrom five litres up, the way you work changes. The \u003ca href=\"\/products\/solo-cleanline-305-a-b-pumpsprueher-5-liter\"\u003esolo CLEANLine (305 A \/ B) Pump Sprayer 5 Litre\u003c\/a\u003e stands next to the car and moves along with you instead of being carried. The hose takes care of reach, and you don't refill once for a complete car.\u003c\/p\u003e\n\n\u003cp\u003eThe large tanks of nine litres or more come from the commercial world. The \u003ca href=\"\/products\/ik-sprayers-ik-multi-pro-9-druckpumpzerstaeuber-inkl-farbenkennzeichnung\"\u003eiK Sprayers „iK Multi\" Pro 9 Pump-Pressure Sprayer (incl. colour coding)\u003c\/a\u003e is carried on a strap and is meant for anyone pre-treating several cars in a row or working large surfaces like motorhomes.\u003c\/p\u003e\n\n\u003cp\u003eAs a rough guide, count on one litre of ready-mixed solution per mid-size car for pre-cleaner and wheels combined. For a single car, the small class is plenty. For anything smaller, meaning interior, quick detailer and spot jobs, the classic \u003ca href=\"\/collections\/spruehflasche\"\u003espray bottle\u003c\/a\u003e remains the quicker tool.\u003c\/p\u003e\n\n\u003ch3\u003eRelease the pressure before the unit goes on the shelf\u003c\/h3\u003e\n\n\u003cp\u003eThe most common reason for a leaking sprayer isn't a material defect, it's how it was stored between two uses.\u003c\/p\u003e\n\n\u003cp\u003eIf pressure stays in the tank for weeks, every seal is under constant load. Rubber responds with creep, a permanent deformation under sustained stress. The seal takes on the shape of its groove and no longer springs back when you need it again.\u003c\/p\u003e\n\n\u003cp\u003eThen there's the chemistry in the tank. Alkaline pre-cleaners and acidic wheel products dry out and leave crystalline residue that settles exactly where things get tight: in the valve, the dip tube and the nozzle bore. A dripping handle almost always has this cause.\u003c\/p\u003e\n\n\u003cp\u003eThe after-use routine takes two minutes. Pull the safety valve until you hear the air escape, pour out the leftover solution, fill with clean water and pump it through the nozzle until it runs clear. Empty the tank, rest the lid on loosely so the remaining moisture can evaporate.\u003c\/p\u003e\n\n\u003cp\u003eIn winter, frost comes into play. Water in the dip tube and valve expands as it freezes and cracks fine plastic parts, which you only notice as a split in spring. A unit stored empty, dry and frost-free, on the other hand, gets through winter with zero effort.\u003c\/p\u003e\n\n\u003cp\u003eThe nozzle deserves a round of its own. It has the finest bore in the whole unit, and a single grain of limescale is enough to skew the spray pattern into a lopsided jet. Unscrew it, soak it in warm water and blow it out, that's all it takes, whereas needles or wire will permanently widen the bore.\u003c\/p\u003e\n\n\u003cp\u003eWith the leading brands, wear parts can be bought individually, and that's worth it. A seal kit for a few euros brings back a unit that would otherwise end up in the bin. A drop of silicone grease on the O-rings every second use keeps the seal supple.\u003c\/p\u003e\n\n\u003ch3\u003eWhich pressure pump atomizer fits your routine\u003c\/h3\u003e\n\n\u003cp\u003eThe choice comes down to three questions: how much area do you treat in one go, what chemistry do you run, and how often does the unit get used?\u003c\/p\u003e\n\n\u003cp\u003eFor getting started with an occasional pre-wash and a round of wheels on your own car, a unit of around two litres is the right answer. The \u003ca href=\"\/products\/solo-cleanline-304-a-b-pumpsprueher-2-liter\"\u003esolo CLEANLine (304 A \/ B) Pump Sprayer 2 Litres\u003c\/a\u003e is robustly built, simple in design and forgives handling mistakes that a finer unit would hold against you.\u003c\/p\u003e\n\n\u003cp\u003eIf you detail regularly and work with changing products, you're better off with the \u003ca href=\"\/products\/ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2\"\u003eiK Sprayers „iK Multi\" Pro 2 Pressure Sprayer (incl. colour coding)\u003c\/a\u003e. The colour coding, the finer spray pattern and the spare parts supply justify the extra cost exactly when the unit is in your hand every week.\u003c\/p\u003e\n\n\u003cp\u003eIf it's mainly aggressive chemistry, decide on the seal first and size second. The \u003ca href=\"\/products\/ik-sprayers-ik-alk-15-druckpumpzerstaeuber-alkalisch\"\u003eiK Sprayers „iK Alk\" 1.5 Pressure Sprayer (Alkaline)\u003c\/a\u003e and the \u003ca href=\"\/products\/sonax-profiline-druckpumpzerstauber-fur-sauren-alkalien-spruhflasche\"\u003eSONAX PROFILINE DruckpumpZerstäuber „Acids+Alkalis\" Spray Bottle\u003c\/a\u003e are built for exactly this.\u003c\/p\u003e\n\n\u003cp\u003eTo put it honestly: if you wash your car four times a year and only deal with bugs and wheels, you don't need a pressure unit. A good hand bottle will do, and the money is better spent on chemistry. And for foam from a lance, there's no getting around a \u003ca href=\"\/collections\/schaumsprueher\"\u003efoam sprayer\u003c\/a\u003e anyway.\u003c\/p\u003e\n\n\u003cp\u003eYou'll find an overview of both types side by side under \u003ca href=\"\/collections\/spruehflaschen-druckpumpzerstaeuber\"\u003eSpraying \u0026amp; foaming\u003c\/a\u003e. A pressure unit doesn't replace the hand bottle, it takes over the jobs the bottle fails at: large areas, long dwell times and chemistry that allows no compromise on the seal.\u003c\/p\u003e","products":[{"product_id":"ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2","title":"\"iK Multi\" Pro 2 Pressure Sprayer (incl. colour coding)","description":"\u003ch2\u003eiK Sprayers \"iK Multi\" Pro 2 — Pressure Sprayer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 2 pressure sprayer\u003c\/strong\u003e is the go-to tool for pro work across construction, cleaning and disinfection, the car trade and pest control. This versatile sprayer shrugs off aggressive chemicals and pairs serious performance with easy handling.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutstanding resistance\u003c\/strong\u003e: thanks to its high-grade seals and materials, the iK Multi Pro 2 stands up to acids, solvents and disinfectants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic design\u003c\/strong\u003e: the shaped grip and the wide filling opening make it far easier to handle and to fill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility\u003c\/strong\u003e: with an adjustable cone nozzle and a flat-jet nozzle, this sprayer flexes to whatever job you throw at it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eVersatile uses\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 2\u003c\/strong\u003e earns its keep across plenty of sectors. Whether you're on \u003cstrong\u003ecleaning and disinfection\u003c\/strong\u003e or doing detail work in the \u003cstrong\u003ecar trade\u003c\/strong\u003e, this sprayer delivers right across the board. Its \u003cstrong\u003ehigh resistance to aggressive chemicals\u003c\/strong\u003e like acids and solvents makes it a tool you won't want to be without on pro jobs.\u003c\/p\u003e\n\u003ch3\u003eTechnical data and functionality\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 2\u003c\/strong\u003e gives you a usable capacity of 1.5 litres. With a safety valve set to 2.5 bar and a built-in pressure-release option, it keeps things safe while you work. You also get a \u003cstrong\u003esee-through tank gauge\u003c\/strong\u003e to keep an eye on the fill level and a \u003cstrong\u003ecolour-coded cap\u003c\/strong\u003e so you always know what's inside.\u003c\/p\u003e\n\u003ch3\u003ePractical details\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003etool-free assembly and disassembly\u003c\/strong\u003e makes upkeep a breeze. The sturdy base and the \u003cstrong\u003eprotective cover for the valve\u003c\/strong\u003e add an extra layer of protection and longevity. And being able to fit different nozzles and accessories widens what this sprayer can take on even further.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.5 liters","offer_id":49337091621199,"sku":"D1-IKS-81671","price":26.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2.png?v=1721417137"},{"product_id":"ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2-360","title":"\"iK Multi\" Pro 2 360° pressure sprayer (with colour coding)","description":"\u003ch2\u003e\u003cstrong\u003eiK Sprayers \"iK Multi\" Pro 2 360° — pressure sprayer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Sprayers \"iK Multi\" Pro 2 360°\u003c\/strong\u003e is a serious pressure sprayer that delivers where it counts: ergonomics, ease of use and safety. With a 1.9 litre tank (1.5 litres usable) and a weight of just 0.56 kg, it's built for pro work across the board — construction, cleaning, disinfection, the automotive trade and pest control.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° spray system:\u003c\/strong\u003e lets you spray in any position, even upside down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety features:\u003c\/strong\u003e fitted with a safety valve (2.5 bar) and a safety cap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility:\u003c\/strong\u003e works with a range of nozzles and accessories, and it shrugs off aggressive chemicals.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eTough and versatile\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 2 360°\u003c\/strong\u003e is built specifically to handle aggressive chemicals. The rugged design and quality materials mean it lasts and keeps doing its job. Whether you're on a building site or working a car, this sprayer holds up even when the conditions get nasty.\u003c\/p\u003e\n\u003ch3\u003eErgonomic design\u003c\/h3\u003e\n\u003cp\u003eThanks to its ergonomic shape, the \u003cstrong\u003eiK Multi Pro 2 360°\u003c\/strong\u003e stays comfortable in the hand all day. The wide opening makes filling easy, the see-through tank lets you keep an eye on the fluid level, and the solid base keeps it standing steady while you work.\u003c\/p\u003e\n\u003ch3\u003eSafety and maintenance\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 2 360°\u003c\/strong\u003e comes with a safety valve that opens at 2.5 bar for safe pressure release. The safety cap and the protective sleeve around the valve chamber add another layer of safety in use. On top of that, the sprayer pulls apart and cleans easily — no tools needed for maintenance.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.5 liters","offer_id":49337166201167,"sku":"D1-IKS-81675","price":29.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2-360.png?v=1721417766"},{"product_id":"ik-sprayers-ik-multi-pro-9-druckpumpzerstaeuber-inkl-farbenkennzeichnung","title":"\"iK Multi\" Pro 9 Pump-Pressure Sprayer (incl. colour coding)","description":"\u003ch2\u003eiK Sprayers \"iK Multi\" Pro 9 Pump-Pressure Sprayer (incl. colour coding)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 9 pump-pressure sprayer\u003c\/strong\u003e is a pro-grade sprayer built specifically for the demanding jobs you run in car care. Strong ergonomics, easy handling and built-in safety give you clean, consistent results. Its chemical-resistant build means it handles aggressive cleaners without flinching.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent resistance\u003c\/strong\u003e: holds up to harsh chemicals like acids, solvents and disinfectants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy filling\u003c\/strong\u003e: the big built-in funnel makes topping up painless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety features\u003c\/strong\u003e: pressure-relief safety valve plus a stainless steel handle with safety lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ePlenty of uses across car care\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 9\u003c\/strong\u003e is one of those tools you reach for all the time in \u003cstrong\u003eprofessional car care\u003c\/strong\u003e. It works a treat on bodywork, wheels, engine bays and upholstery. The rugged build and quality materials mean it keeps going for the long haul and stays reliable, even when you're hammering it with strong cleaners day in, day out.\u003c\/p\u003e\n\u003ch3\u003eErgonomic design for comfort and efficiency\u003c\/h3\u003e\n\u003cp\u003eThe sprayer is built around an \u003cstrong\u003eergonomic design\u003c\/strong\u003e that keeps it comfortable in the hand and dead easy to work. The clear tank with a level gauge lets you keep an eye on how much liquid you've got left. The built-in funnel takes the hassle out of filling, while the solid base and shoulder strap keep it easy to carry and use.\u003c\/p\u003e\n\u003ch3\u003eSafety and durability\u003c\/h3\u003e\n\u003cp\u003eWith a safety valve set to 3 bar and a \u003cstrong\u003echemical-resistant build\u003c\/strong\u003e, the \u003cstrong\u003eiK Multi Pro 9\u003c\/strong\u003e keeps things safe while you work. The stainless steel handle with safety lock and the reinforced 1.5 m hose give you safe, dependable use, even when the job gets tough.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"6 liters","offer_id":49396215021903,"sku":"D1-IKS-82672","price":93.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-multi-pro-9-druckpumpzerstaeuber-inkl-farbenkennzeichnung.png?v=1722526225"},{"product_id":"ik-sprayers-ik-multi-pro-12-druckpumpzerstaeuber-inkl-farbenkennzeichnung","title":"\"iK Multi\" Pro 12 pressure sprayer (incl. colour coding)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eiK Sprayers \"iK Multi Pro 12\" pressure sprayer (incl. colour coding)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 12 pressure sprayer\u003c\/strong\u003e is the tool you reach for when you spend your days on cars. It's built tough, packed with features, and made to take on the hardest jobs in detailing. The \u003cstrong\u003eiK Multi Pro 12\u003c\/strong\u003e is spot on for laying down cleaners, wax polish and the rest of your car care line-up. The \u003cstrong\u003eiK Multi Pro 12 pressure sprayer\u003c\/strong\u003e gives you pro-grade output and gets the most out of every fill. Its acid- and solvent-resistant build means it keeps going for years. The 10-litre tank, with 8 litres of usable capacity, lets you work big vehicles without stopping to top up. The built-in pressure-release option and the see-through tank gauge give you that bit more safety and control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough and long-lasting:\u003c\/strong\u003e stands up to most chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic design:\u003c\/strong\u003e carry strap and foot rest for comfortable work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with everything:\u003c\/strong\u003e handles a wide range of car care products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eOne sprayer for the whole job\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 12\u003c\/strong\u003e earns its keep when you detail for a living. Whether you're putting down cleaners, degreasers or sealants, this pressure sprayer is ready to go. The adjustable nozzles — one cone, one fan — let you dial in the spray pattern to whatever you're doing, so the product goes on evenly and you cover the panel properly.\u003c\/p\u003e\n\u003ch3\u003eEasy to handle, easy on you\u003c\/h3\u003e\n\u003cp\u003eThe ergonomic build of the \u003cstrong\u003eiK Multi Pro 12\u003c\/strong\u003e makes it a pleasure to use. The reinforced 1.5-metre hose and the sturdy fibreglass lance let you work freely. The clear tank means you always know how much you've got left, and the big built-in funnel makes refilling a breeze. The handy foot rest and solid base keep things comfortable and steady while you work.\u003c\/p\u003e\n\u003ch3\u003eSafety and efficiency\u003c\/h3\u003e\n\u003cp\u003eSafety comes first with the \u003cstrong\u003eiK Multi Pro 12\u003c\/strong\u003e. The sprayer has a safety valve that opens at 3 bar and releases pressure automatically. That keeps you away from any direct contact with the gas and makes it safer to use. The colour cards for marking what's in the tank are a smart touch too — they stop mix-ups and keep you moving.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"8 liters","offer_id":49396242809167,"sku":"D1-IKS-82671","price":100.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-multi-pro-12-druckpumpzerstaeuber-inkl-farbenkennzeichnung.png?v=1722525217"},{"product_id":"ik-sprayers-ik-multi-pro-12-plus-druckpumpzerstaeuber-kompressorventil-inkl-farbenkennzeichnung","title":"\"iK Multi\" Pro 12+ (Plus) Pressure Sprayer with Compressor Valve (incl. Colour Coding)","description":"\u003ch2\u003eiK Sprayers \"iK Multi Pro 12+ (Plus)\" — Pressure Sprayer with Compressor Valve\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 12+ (Plus) pressure sprayer with compressor valve\u003c\/strong\u003e is the go-to tool for car care pros. This serious pressure sprayer pulls together ergonomics, easy handling and top-tier safety so you get clean results every time. The \u003cstrong\u003eiK Multi Pro 12+\u003c\/strong\u003e stands on a tough, stable base with a foot rest, a built-in filler funnel, a see-through tank gauge and a safety cap. It holds 8 litres, which is plenty for long stints of car care and detailing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic design:\u003c\/strong\u003e easy to carry with the shoulder strap, plus a handy spot to stow the spray lance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility:\u003c\/strong\u003e handles acids, solvents and disinfectants without flinching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e automatic bleed option and a pressure valve so it runs safe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVersatility and where it earns its keep\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Multi Pro 12+\u003c\/strong\u003e is a real all-rounder and right at home in car care. Built tough, it shrugs off even the harshest chemicals. The adjustable cone nozzle and the flat-fan nozzle let you dial in different spray patterns, spot-on for all kinds of cleaning and care jobs.\u003c\/p\u003e\n\u003ch3\u003eQuality materials and build\u003c\/h3\u003e\n\u003cp\u003eThe pressure sprayer comes with a 1.5-metre reinforced hose and a 47 cm fibreglass lance. Those parts mean it lasts and stands up to chemicals day in, day out. The see-through tank lets you keep an eye on the fluid level at a glance, which keeps the whole job running smoother.\u003c\/p\u003e\n\u003ch3\u003eEasy handling and safety\u003c\/h3\u003e\n\u003cp\u003eRunning the \u003cstrong\u003eiK Multi Pro 12+\u003c\/strong\u003e is a doddle thanks to the ergonomic grip and the built-in safety bits. The spray vessel has a pressure valve that bleeds off safely whenever you need it. On top of that, the carry strap makes it easy to move around and the foot rest keeps it steady while you work.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"8 liters","offer_id":49396248772943,"sku":"D1-IKS-82679","price":110.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-multi-pro-12-plus-druckpumpzerstaeuber-kompressorventil-inkl-farbenkennzeichnung.png?v=1722525560"},{"product_id":"ik-sprayers-ik-alk-15-druckpumpzerstaeuber-alkalisch","title":"\"iK Alk\" 1.5 Pressure Sprayer (Alkaline)","description":"\u003ch2\u003eFull control with harsh cleaners: iK Sprayers \"iK Alk\" 1.5 Pressure Sprayer (Alkaline)\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe iK Sprayers iK Alk 1.5 is a pressure sprayer built specifically for strongly alkaline cleaners, with EPDM seals that let you apply APCs, pre-cleaners and alkaline shampoos in a safe, even and material-friendly way in pro detailing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers iK Alk 1.5\u003c\/strong\u003e isn't a universal „do-it-all“ sprayer – it's an uncompromisingly specialised tool for exactly what's day-to-day in pro detailing: laying down strong, alkaline cleaners in a controlled, safe and repeatable way. Built for detailers who know that aggressive chemistry needs just as precise a tool as a high-end polisher, the iK Alk 1.5 gives you the control, toughness and durability we expect in high-end detailing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProperly alkali-proof\u003c\/strong\u003e – EPDM seals are made for strongly alkaline media and stop early wear from APCs, pre-cleaners or alkaline shampoos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteady spray pattern\u003c\/strong\u003e – even pressure build-up means repeatable wetting with no dripping, spitting or pressure drop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro ergonomics\u003c\/strong\u003e – compact body, a secure grip and a controlled trigger make precise work easy even over long sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ealkaline pressure sprayer for car detailing and pro cleaning\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ealkaline pressure sprayer\u003c\/strong\u003e iK Alk 1.5 was built from the ground up to handle cleaners that quickly attack seals or ruin the spray pattern in ordinary spray bottles. Alkaline products – APCs, engine cleaners or pre-wash solutions – need materials that stay chemically stable. That's exactly where the iK Alk 1.5's EPDM seals come in. EPDM is far more resistant to strongly alkaline media than classic rubber compounds, so valves, pistons and sealing faces stay tight and smooth-running for the long haul. For you that means no pressure fade, no gummed-up trigger, no uncontrolled output – even with regular use in the studio.\u003c\/p\u003e\n\u003ch3\u003eEPDM seals and controlled application in day-to-day detailing\u003c\/h3\u003e\n\u003cp\u003eIn the details, quality often comes down to the parts you don't notice. On the iK Alk 1.5 it's the EPDM seals that make the difference. They keep the chemistry cleanly separated from the mechanics and make sure the sprayer works reliably even with aggressive cleaners. What we see day-to-day: an even mist for large-area jobs like pre-wash or engine-bay cleaning, and at the same time enough control for pinpoint work on door shuts, sills or heavily soiled spots. Pressure builds up evenly, the spray pattern stays stable, and you can dial in exactly how much product actually hits the surface – a real plus when efficiency, going easy on materials and clean work all need to come together.\u003c\/p\u003e\n\u003ch3\u003eResults, longevity and how it stands apart from universal sprayers\u003c\/h3\u003e\n\u003cp\u003eThe biggest difference between the iK Alk 1.5 and classic all-purpose spray bottles doesn't show after the first use, but after weeks and months of hard work. Where all-rounder sprayers fade fast under alkaline load, the iK Alk 1.5 stays dimensionally stable, tight and precise. The result is consistent work quality, less wasted product and a much lower risk of material damage from uncontrolled dripping or leaks. For pro detailers working with strong cleaners every day, that's no luxury but a business decision: fewer replacements, less hassle, more focus on what actually matters – a perfectly cleaned car.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"1 liter","offer_id":56928690831695,"sku":"D1-IKS-81777","price":23.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-alk-15-druckpumpzerstaeuber-alkalisch.png?v=1769730996"},{"product_id":"ik-sprayers-ik-alk-pro-2-druckpumpzerstauber-alkalisch","title":"\"iK Alk\" Pro 2 Pressure Sprayer (Alkaline)","description":"\u003ch2\u003eMore volume, more pressure, more control: iK Sprayers \"iK Alk\" Pro 2  Pressure Sprayer (Alkaline)\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe iK Sprayers iK Alk Pro 2 is a professional pressure sprayer with EPDM seals, built specifically for strong alkaline cleaners — bigger volume, steady pressure and high chemical resistance make it ideal for heavy detailing work.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers iK Alk Pro 2\u003c\/strong\u003e is the logical next step for anyone whose small alkaline sprayer just isn't cutting it. When pro detailing regularly throws large panels, big product volumes and strong cleaners at you, you need a tool that stays rock-steady all day. That's exactly where the Alk Pro 2 sits: more capacity, more ruggedness and no-compromise chemical resistance — built for daily use with alkaline cleaners.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro format with more volume\u003c\/strong\u003e – ideal for pre-wash, APC jobs and heavy cleaning without constantly re-pumping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPDM seals for strong alkalis\u003c\/strong\u003e – durable, tough and dialled in for aggressive cleaning chemistry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteady, repeatable spray pattern\u003c\/strong\u003e – even pressure for controlled wetting on panels big and small.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ealkaline pro pressure sprayer for heavy detailing duty\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ealkaline pro pressure sprayer\u003c\/strong\u003e iK Alk Pro 2 is built for detailers who reach for strong cleaners every day and don't want to settle for a halfway tool. Alkaline pre-cleaners, APCs and heavy-duty degreasers put real stress on the body and seals. Thanks to high-grade EPDM seals, the Alk Pro 2 stays reliably sealed, smooth and working even after repeated contact with aggressive chemistry. The bigger tank cuts down interruptions, so you can focus on the work — not on refilling or re-pumping.\u003c\/p\u003e\n\u003ch3\u003eEPDM seals, pressure stability and controlled application\u003c\/h3\u003e\n\u003cp\u003eOne real strength of the iK Alk Pro 2 is its steady pressure. The sprayer builds pressure evenly and holds it through the whole spray run. Paired with the EPDM seals, you get a clean, controlled spray pattern with no pressure spikes or sudden drop-off. That matters most on big jobs like pre-wash or cleaning badly soiled areas, where even wetting decides between cleaning power and being kind to the surface. At the same time the sprayer lets you work precisely on detail spots without burning through product.\u003c\/p\u003e\n\u003ch3\u003eDurability, efficiency and a clear step up from the standard class\u003c\/h3\u003e\n\u003cp\u003eSide by side with smaller or universal sprayers, the iK Alk Pro 2 shows its edge mainly over the long run. Where standard sprayers wear out fast under constant alkaline load, the Alk Pro 2 stays reliable and precise. That means less downtime, fewer replacements and a smoother workflow overall. For pro detailers working with strong cleaners every day, that's real value: consistent results, clean work and a tool that keeps performing on day one hundred just like day one.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"1.5 liters","offer_id":56928705904975,"sku":"D1-IKS-81685","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-alk-pro-2-druckpumpzerstauber-alkalisch.png?v=1769731163"},{"product_id":"ik-sprayers-ik-alk-pro-2-druckpumpzerstaeuber-alkalisch","title":"\"iK Alk\" Pro 12 Pressure Pump Sprayer (Alkaline)","description":"\u003ch2\u003eMaximum reach for strong chemistry: iK Sprayers \"iK Alk\" Pro 12 Pressure Pump Sprayer (Alkaline)\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe iK Sprayers iK Alk Pro 12 is a professional pressure pump sprayer with a large tank and EPDM seals, built specifically for strongly alkaline cleaners and delivering steady spray output over big surfaces in day-to-day detailing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers iK Alk Pro 12\u003c\/strong\u003e answers a clear need from the pro world: big surfaces, strong alkaline cleaners and tech you can fully rely on. When pre-wash, APC work or industrial cleaning needs to be handled non-stop and efficiently rather than spot by spot, the Pro 12 format comes into play. This isn't about compromise, it's about capacity, stability and controlled output, exactly what we expect in high-end detailing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge working volume:\u003c\/strong\u003e ideal for heavy pre-wash, commercial vehicles or fleet cars without constant refilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPDM seal system:\u003c\/strong\u003e built end to end for strongly alkaline chemistry and sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional pressure stability:\u003c\/strong\u003e even spray over long work intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003elarge-volume alkaline pressure pump sprayer for professional use\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003elarge-volume alkaline pressure pump sprayer\u003c\/strong\u003e iK Alk Pro 12 is built for jobs where small sprayers simply run out of road. Its big tank lets you run long work cycles without breaking the flow to refill. On pre-wash, on vans, SUVs or whole fleets, the advantage shows up straight away. The EPDM seals are made to stay stable over time even with strongly alkaline cleaners, the deciding factor when you work with powerful chemistry every day.\u003c\/p\u003e\n\u003ch3\u003eEPDM seals, pressure system and even surface coverage\u003c\/h3\u003e\n\u003cp\u003eA core quality of the iK Alk Pro 12 is its pressure system paired with the EPDM seals. Pressure builds evenly and holds reliably, with no sudden drops or erratic spray. That gives you even coverage across big surfaces, getting the most out of alkaline products. At the same time the spray stays controllable enough to target problem spots. For you that means efficient use of chemistry, clean work and repeatable results, whatever the size of the job.\u003c\/p\u003e\n\u003ch3\u003eLong-term reliability and a clear step up from the standard class\u003c\/h3\u003e\n\u003cp\u003eThe iK Alk Pro 12 plays in a different league than your usual pressure pump sprayers. Where standard units wear out fast on high-volume jobs with aggressive chemistry, this one is built for sustained load. The rugged build, the alkali-resistant seal system and the steady pressure mean the sprayer keeps working reliably even after plenty of jobs. For professional detailers, body shops or industrial users that's no luxury, it's a real efficiency gain: less downtime, fewer replacement units and consistent quality in everyday work.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"8 liters","offer_id":56928710656335,"sku":"D1-IKS-82681","price":103.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-alk-pro-2-druckpumpzerstaeuber-alkalisch.png?v=1769731331"},{"product_id":"ik-sprayers-ik-ppf-tinting-mehrzweckspruehgerat-edelstahl","title":"\"iK PPF \u0026 Tinting\" Multi-Purpose Sprayer (Stainless Steel)","description":"\u003ch2\u003eA clean film flow instead of spray chaos: the iK Sprayers \"iK PPF \u0026amp; Tinting\" as a stainless-steel multi-purpose sprayer for flawless install films\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eIf you want to lay PPF or window tint down cleanly, evenly and without wearing yourself out, the iK PPF \u0026amp; Tinting gives you a steady film of slip solution – stainless tank, a controlled spray pattern and a long hose – with none of the frantic fiddling.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers \"iK PPF \u0026amp; Tinting\"\u003c\/strong\u003e is the sprayer for anyone who doesn’t want to stick film on “somehow” but install it like a pro: controlled, repeatable, and with the feeling that the tool is doing the work for you – not inventing new problems. iK Sprayers positions it specifically for installing paint protection film (PPF) and window-tint\/vinyl films, built around a corrosion-resistant stainless-steel tank and an equally tough pump unit – plus ergonomic handling, so you’re not cursing your hands by the second door on a big vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA steady, even install film instead of a “patchwork”:\u003c\/strong\u003e With PPF and tint the spray film decides everything – how well you can position, how it glides, how cleanly your squeegee runs. A finely adjustable nozzle (from jet to mist\/fan) helps you hit exactly the wetness you need in that moment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach \u0026amp; freedom of movement like a well-planned setup:\u003c\/strong\u003e A reinforced hose (6 m, 12 mm) is listed as a matching accessory and lets you work your way around the car without the sprayer constantly needing to be dragged along or the hose kinking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel as a statement for the everyday grind:\u003c\/strong\u003e The stainless tank isn’t just “nice” – with constant exposure to slip solutions, water\/soap mixes and daily rinsing it’s a real advantage; iK Sprayers cites corrosion-resistant materials and a shut-off valve made of high-density polypropylene.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMisting your PPF slip solution the right way, without overkill\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe PPF slip solution\u003c\/strong\u003e is simple at its core: you want an even, connected film that lets the film’s adhesive “float” until you’ve lined it up – then releases in a controlled way once you squeegee and work the liquid out. This is exactly where a hobby spray bottle parts ways with a pro pressure sprayer: not because “more pressure” is automatically better, but because a repeatable spray pattern gives you repeatable results. If you get mist on the bonnet, then suddenly a jet, then drips again, you end up with a patchwork of unevenly wet surface. Lining up on that feels like the film’s riding a rollercoaster: too much drift here, instant grab there, little spots that suddenly stall under your squeegee. With a sprayer like this you dial your wetness in on purpose: broad “mist\/fan” for an even film, a targeted “jet” for corners, edges, badge areas or to re-wet a spot before you go again. Customer reviews call out the nozzle adjusting from jet to mist – and in practice that’s worth its weight in gold.\u003c\/p\u003e\n\u003cp\u003eThe second point, often underrated: on PPF, ergonomics isn’t comfort fluff – it’s a quality factor. Cramp up after two hours of installing and you automatically work less precisely – squeegee pressure gets uneven, the edge gets rushed, and suddenly you get those classic “why is there a little lift there?” moments. iK Sprayers highlights the ergonomic design meant to improve control and comfort and cut fatigue. And yes, that reads like marketing – but anyone who’s done a whole vehicle side in one go knows how much a properly controllable sprayer saves your concentration.\u003c\/p\u003e\n\u003cp\u003eOn the “how much do I wet?” question the truth is: as much as needed, as evenly as possible – and that depends on film type, temperature, panel size and your pace. Clean, even wetting cuts the risk of shoving the film “dry” across the paint while positioning, or the squeegee juddering over half-dry zones. Plenty of PPF guides stress that both the surface and the film\/adhesive side should be sprayed thoroughly with install gel\/solution before you lay it – because that full wetting is exactly what buys you your working window and control.\u003c\/p\u003e\n\u003cp\u003ePutting your setup together with us at Detailing1: for the sprayer side you’ll find everything in \u003ca href=\"\/collections\/ik-sprayers\"\u003eiK Sprayers\u003c\/a\u003e as well as in \u003ca href=\"\/collections\/spruehflaschen-druckpumpzerstaeuber\"\u003eSpray bottles \u0026amp; pressure sprayers\u003c\/a\u003e. For the final surface after the install (once everything’s set) film-care products like a film sealant are often the next logical step — coatings made specifically for vinyl\/PPF, depending on the finish you’re after.\u003c\/p\u003e\n\u003ch3\u003eA stainless pressure sprayer in day-to-day wrapping and what the material choice really buys you\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA stainless pressure sprayer\u003c\/strong\u003e sounds like “luxury” – but in wrapping practice it’s pretty down-to-earth: you want a system you can rinse every day that stays true to shape and doesn’t feel like you’ll be replacing it after one summer of heavy use. iK Sprayers describes a corrosion-resistant tank and a corrosion-resistant pump (stainless version) plus a shut-off valve made of high-density polypropylene. That’s a well-thought-out combo: metal where mechanical load and constant moisture dominate, and a tough polymer where a valve needs to stay smooth, sealed and chemically resistant.\u003c\/p\u003e\n\u003cp\u003eIn practice that means: after an install job you don’t just rinse it “somehow, quickly” – you want the sprayer properly clean, hose, valve and nozzle included. Especially when you work with different solutions (a classic slip mix, a tackier blend, maybe clean water for panel wiping), flushing it through properly is a must so the spray pattern isn’t suddenly “different” the next day. Stainless forgives more routine abuse: the material “works” less, less warps from temperature swings where you work, and you get that good feeling that tank \u0026amp; pump body don’t have to be treated like a throwaway container. I’ll say it straight: this isn’t a magic “makes everything better” bonus – but it’s exactly the kind of unfussy quality that saves your nerves long-term in a pro setup.\u003c\/p\u003e\n\u003cp\u003eThere’s also the “12 L or 13 L?” question – depending on the page, you’ll see different figures online. iK Sprayers gives the 13-litre spec, while some retailer texts say 12 litres. For the work the deciding point isn’t the one number but this: you’ve got a big, portable reservoir that lets you work long stretches without refilling – especially on big SUVs, vans, or when you prep several panels in a row. If you care about the exact figure: go by the manufacturer spec for this model (12 L).\u003c\/p\u003e\n\u003cp\u003eAnd then there’s the reach: a 6-metre hose (12 mm) is listed as a matching accessory; manufacturer\/video descriptions highlight the long-hose option as a plus for manoeuvrability. Sounds trivial at first – until you work your way around a car once and notice how much time you can waste “repositioning the unit” or “untangling the hose”. A thicker, reinforced hose kinks less, sits more stable, and you can keep your spray motion flowing – which in turn makes the install film more even.\u003c\/p\u003e\n\u003ch3\u003eInstalling vinyl window tint with control, reach and a clean finish\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVinyl window tint\u003c\/strong\u003e (and window tint in general) is the arena where spray technique gets brutally honest: too little liquid and you fight early “grab” and frantic re-adjusting; too much and you float forever while everything runs back at the edges. iK Sprayers names it explicitly for applying protective film and for darkening windows in vinyl – exactly what wrappers do day-to-day when it’s not just “a little visor strip”. \u003c\/p\u003e\n\u003cp\u003eWhat actually helps you here is three things: a spray pattern you can fine-tune; a handling that doesn’t tire you out; and a system that doesn’t keep stopping you as you go around the vehicle. The nozzle being described as adjustable from jet to mist, and a fan jet for fine atomisation, fits typical tint workflows perfectly: wet a broad area, position the film, work it out with a controlled squeegee pull, re-spray on target if needed – without making “puddles” or running dry. \u003c\/p\u003e\n\u003cp\u003eThe next detail you only really come to appreciate after a few installs is the shut-off valve\/handling. Switching between spraying, grabbing, squeegeeing and edge work, you don’t want a system that drips after or just “keeps going” every time you set it down. The maker mentions a shut-off valve in high-density polypropylene – aimed squarely at controlled work: spray, stop, move, spray again, without unwanted mess. \u003c\/p\u003e\n\u003cp\u003eAnd because it always happens in practice: you’re installing, you’re in the flow, then comes the “damn, I need to get round the car once without losing sight of the film” moment. That’s exactly where a long-hose setup is a real productivity lever. Video\/manufacturer descriptions highlight the 6 m hose as “extended reach”; and once you’ve used it, you won’t want to go back on the next job to “sprayer in one hand, film in the other, and now somehow around the B-pillar”. \u003c\/p\u003e\n\u003cp\u003eBottom line, the iK concept here is very clear: a big, tough stainless sprayer built for film installation, combined with ergonomic work and reach. That mix is what turns a “sprayer” into an install tool. And yes – we’re talking about a tool here, not magic: your technique still decides. But if you’re already putting in the effort to wrap cleanly, your spray setup shouldn’t be the weakest link in the chain.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"12 liters","offer_id":56928872104271,"sku":"D1-IKS-83371","price":338.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-ppf-tinting-mehrzweckspruehgerat-edelstahl.png?v=1769729064"},{"product_id":"solo-cleanline-303-a-b-pumpsprueher-1-25-liter","title":"CLEANLine (303 A \/ B) Pump Sprayer 1.25 Litre","description":"\u003ch2\u003eOne pump sprayer, two chemistry worlds: solo CLEANLine (303 A \/ B) — Pump Sprayer 1.25 Litre\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhich pump sprayer suits your cleaner? The \u003cstrong\u003esolo CLEANLine (303 A \/ B) — Pump Sprayer 1.25 Litre\u003c\/strong\u003e comes as the 303 A for acidic media (FKM, pH 1–7) and the 303 B for alkaline media (EPDM, pH 7–14) – each with 3 bar, a safety valve and an adjustable nozzle.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003esolo CLEANLine (303 A \/ B) — Pump Sprayer 1.25 Litre\u003c\/strong\u003e is the answer when you don't want to atomise cleaning chemistry „somehow“, but in a controlled, even and material-friendly way. In detailing it's often not just the product that decides the result, but how you lay it down: too coarse = wasted product, too fine = it dries off, wrong seal = headaches. That's exactly where the CLEANLine series plays its strength: 303 A and 303 B are built the same technically, but sealed differently for the chemistry – so you run acidic and alkaline cleaners each in the right system. Both versions work manually with a piston pump up to 3 bar, have a safety valve to release the pressure and an adjustable hollow-cone nozzle for spray volume and pattern.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003epH-right instead of „it'll do“\u003c\/strong\u003e: 303 A uses FKM seals for acidic media (pH 1–7), 303 B EPDM seals for alkaline media (pH 7–14). That's not theory – that's the difference between working clean long-term and „why is this part swelling up now?“.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent spray pattern at 3 bar\u003c\/strong\u003e: with up to 3 bar working pressure you get repeatable wetting – ideal when you want to lay down pre-wash, APC or wheel cleaner across a surface without overdoing the mist.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDay-to-day details that keep things hassle-free\u003c\/strong\u003e: safety valve for releasing pressure, a wide filler opening, base feet, a semi-transparent tank with a fill mark – plus a lock for continuous spraying when you're covering a surface instead of training your finger.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFKM vs. EPDM seals: understanding pH ranges 1–7 and 7–14 and choosing right\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFKM seals (303 A)\u003c\/strong\u003e are made to handle acidic cleaning media reliably in the pH window 1–7 – SOLO explicitly names use in the acidic cleaning range here and lists FKM („Viton“) as the seal material. If you work with acidic specialist cleaners in detailing (classics: lime\/mineral-based deposits, water spots and rust film on suitable surfaces, depending on the product), then the A version is the logical grab – not because „A is better“, but because the seal matches the medium. The other way round, the \u003cstrong\u003eEPDM seal (303 B)\u003c\/strong\u003e is designed for alkaline cleaners in the pH 7–14 range; SOLO describes EPDM as the seal material for basic\/alkaline applications and also notes it suits disinfecting solutions. In practice that means: for typical all-purpose cleaners (APC) and many degreaser\/pre-wash scenarios you're very often in the green with 303 B, while 303 A is your safe bet when you deliberately work acidic. Our tip from the day-to-day: if you regularly spray both alkaline and acidic, genuinely grab both versions – that's not a gimmick, it's clean chemistry hygiene. And if you love your bottle parking spots: the CLEANLine even has a card\/label system in the spray head, including coloured marker cards – great for keeping contents and uses apart (and yes: it very effectively prevents the „oops, wrong cleaner“ moment).\u003c\/p\u003e\n\u003ch3\u003eCar pre-wash and detailing: applying cleaning chemistry in a controlled way with a pump sprayer\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCar pre-wash\u003c\/strong\u003e lives off chemistry clinging evenly and getting to work – not off you sending half of it into the air as mist. That's exactly what the 1.25-litre format is strong for: handy, quick to fill, and big enough to do a car in one go without topping up constantly (fill volume 1.25 L). The adjustable hollow-cone nozzle lets you trim the spray pattern so you get more coverage or more punch depending on panel size and dirt – without changing the character of the product. For us day-to-day that's the sweet spot for: pre-cleaners\/pre-sprays on lower areas, APC on sills\/door shuts (with the right pH version), and targeted wetting of problem zones.\u003c\/p\u003e\n\u003ch3\u003e3 bar spray pressure, hollow-cone nozzle, safety valve and continuous spraying for a clean pattern\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3 bar spray pressure\u003c\/strong\u003e on a hand pump sprayer isn't a pub-talk number, it's the point where the spray pattern and your work rhythm get stable: pump, spray, keep going – without running „empty“ after three trigger pulls. SOLO quotes 3 bar for both 303 models and pairs it with a safety valve that can drop the pressure for emptying\/refilling and automatically vents over-pressure. On top of that there's the encapsulated pump unit, which shields the pump elements from the cleaning fluid being dispensed – a detail that in day-to-day simply means: less contact between the mechanism and aggressive chemistry, and so a more robust, more consistent function over time. And because we love it in detailing when things „just run“: the lock slider for continuous spraying is gold when you want to wet larger areas without sending your finger to the gym. If you need more of a „foam blanket“ than a spray film, take a look at one of our foam sprayers\/foamers as an add-on – the pump sprayer then stays your tool for pre-sprays, targeted wetting and working „by feel“.\u003c\/p\u003e","brand":"solo","offers":[{"title":"1.25 liters \/ Acid (pH 1-7) 303 A","offer_id":56938331111759,"sku":"D1-SOL-30301","price":18.49,"currency_code":"EUR","in_stock":true},{"title":"1.25 liters \/ Alkaline (pH 7-14) 303 B","offer_id":56938331078991,"sku":"D1-SOL-30302","price":18.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-303-a-pumpsprueher-1-25-liter.png?v=1769854142"},{"product_id":"solo-cleanline-304-a-b-pumpsprueher-2-liter","title":"CLEANLine (304 A \/ B) Pump Sprayer 2 Litres","description":"\u003ch2\u003eSpray on purpose, not by guesswork: solo CLEANLine (304 A \/ B) — 2-litre pump sprayer for clean, controlled chemical work\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhich solo CLEANLine (304 A \/ B) — 2-litre pump sprayer fits your cleaner? 304 A covers acidic to neutral media (pH 1–7) with FKM, 304 B handles neutral to alkaline media (pH 7–14) with EPDM – both up to 3 bar.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003esolo CLEANLine (304 A \/ B) — 2-litre pump sprayer\u003c\/strong\u003e is to detailing what a clean torque wrench is to mechanical work: control. Not „more product“, but an even spray pattern, repeatable wetting and a tool that matches the chemistry – so you’re not arguing about sticking seals or pressure loss after three jobs. SOLO built the CLEANLine specifically for cleaning and disinfection tasks, and with the 304s it spells out the split by pH range very clearly: A models (FKM) for pH 1–7, B models (EPDM) for pH 7–14.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe right seal is your „chemical firewall“.\u003c\/strong\u003e With acidic media the CLEANLine runs FKM seals, with alkaline media EPDM – exactly so the parts in contact with the cleaning fluid don’t suffer needlessly and the sprayer keeps working consistently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore output per stroke – no rushing.\u003c\/strong\u003e SOLO describes improved pump efficiency, so you put out more fluid with fewer strokes, plus an operating pressure up to 3 bar for longer working intervals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for day-to-day use: sturdy, easy to fill, clean to label.\u003c\/strong\u003e UV-resistant polyethylene tank with feet, a wide filler opening, an easy-to-read fill-level mark – plus a card holder in the spray head including writable media cards for labelling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eChoosing FKM and EPDM seals for pH 1-7 and pH 7-14 the right way\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFKM and EPDM\u003c\/strong\u003e aren’t decorative acronyms – they’re the call that decides whether your sprayer just works day-to-day or turns into a maintenance project. SOLO deliberately splits the CLEANLine by pH window: if you’re laying down concentrated or diluted acids in the pH 1–7 range, tools with FKM seals are the right pick; once it goes alkaline (pH 7–14), EPDM is the seal material that goes in. \u003c\/p\u003e\n\u003cp\u003eFor you as a detailer it translates beautifully into plain terms: if you run typical acidic jobs (say acidic cleaners that go after mineral residue and deposits), that belongs in the A world – and that’s exactly what 304 A is for. If your day-to-day runs more alkaline (classic: lots of pre-cleaner\/APC\/degreaser setups meant to break down organic grime), 304 B is the clean call. The point isn’t „acid good \/ alkali bad“ – the point is material compatibility and consistency: seals have to seal and move while they’re in contact with the medium. Mix it up wrong here and you rarely notice on the first spray – you notice later: pressure drops faster, the action gets rougher, small parts age for no reason.\u003c\/p\u003e\n\u003cp\u003eNice to know (because it really comes up in practice): with FKM, SOLO also mentions suitability for oil-based and partly chlorinated-hydrocarbon media. That’s no free pass for experiments, but it explains why a lot of pros like to stay in the FKM world for „chemically demanding“ media – as long as the pH use fits. And since we don’t do detailing in a lab but between the wheel, the sill and the door shut: if you run several media side by side, the A\/B logic is the simplest way to avoid mistakes. Label the contents, match the tool to it, done.\u003c\/p\u003e\n\u003ch3\u003eUsing 3 bar pump pressure, an encapsulated pump and an adjustable universal nozzle in detailing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3 bar pump pressure\u003c\/strong\u003e sounds technical at first – but it’s really the difference between „constantly re-pumping“ and „working in a clean flow“. With the 304s, SOLO describes how the efficient pump lets you reach an operating pressure of up to 3 bar with little effort, giving you long enough working intervals. That’s what makes the sprayer so pleasant in everyday car care: you can wet a panel evenly without the spray going tired after ten seconds.\u003c\/p\u003e\n\u003cp\u003eThe second pro building block is the fully encapsulated pump unit. SOLO explains that the encapsulated pump shields the pump elements from the chemically active cleaning fluid and so helps it last. Translated: less direct „chemical stress“ in the mechanical heart of the thing, less risk that the pump feel or the seal tightness gets worse over time – as long as you don’t treat the tool like a throwaway after use (more on that in a second).\u003c\/p\u003e\n\u003cp\u003eAnd then there’s the part you feel right away on every job: nozzle and handling. SOLO names a new, adjustable universal nozzle for a more balanced jet and spray pattern, and on the 304 B explicitly the adjustable hollow-cone nozzle, which lets you set spray volume and pattern. Add ergonomic controls, a comfortable trigger lever and a lock slide that lets you switch between continuous and spot spraying while you work. That’s pure gold in detailing: spot-on at badges, shut lines and edges – and the next moment broad across pre-wash zones, without cramping your hand or chopping up your workflow.\u003c\/p\u003e\n\u003cp\u003eBadly underrated, but a real quality indicator day-to-day: filling and standing. Per SOLO the tank is made of sturdy, UV-resistant polyethylene, stands on three feet, has a wide filler opening and a fill-level mark in the semi-transparent material. That’s not „nice“, that’s time saved: mix faster, spill less, set it down cleanly – and if you work professionally, those are exactly the details that make the session pleasant.\u003c\/p\u003e\n\u003ch3\u003eCleaning, releasing pressure and workflow tips for long enjoyment from your pump sprayer\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning and releasing pressure\u003c\/strong\u003e on a pump sprayer isn’t the boring chore – it’s the part that preserves your spray quality. SOLO describes a safety valve you use to release the tank pressure for emptying, refilling or cleaning, and that any pressure above 3 bar is bled off automatically through this valve. For your routine that means: after working, bring the pressure down in a controlled way first, then open – not the other way round. That keeps it clean and predictable.\u003c\/p\u003e\n\u003cp\u003eIf you’re after consistent results in detailing, build yourself a simple routine: after use, empty the leftover medium, rinse with clean water, run one pass of water through it (so the nozzle and lines are clear too), then store it dry and clean. That stops residue drying on the valves and nozzle and ruining your spray pattern next time. And yes: with the more „active“ cleaners it pays off twice, because that way you don’t leave the seals sitting in the medium permanently. The original operating manual shows, among other things, cleaning and care steps plus dismantling\/checking the nozzle parts – a good reminder that a tool like this earns some care if you want it running like a pro tool.\u003c\/p\u003e\n\u003cp\u003eHandy (and pretty smartly solved): on the 304 B SOLO names a card slot built into the spray head for marking the tank contents, including the writable media cards supplied. For you that means: no more „wasn’t that the wheel cleaner… or?“ – you label cleanly by use case and automatically grab the right one in the flow. That’s exactly how you cut detail mistakes before they happen.\u003c\/p\u003e","brand":"solo","offers":[{"title":"2 liters \/ Acid (pH 1-7) 304 A","offer_id":56938377576783,"sku":"D1-SOL-30401","price":19.49,"currency_code":"EUR","in_stock":true},{"title":"2 liters \/ Alkaline (pH 7-14) 304 B","offer_id":56938377544015,"sku":"D1-SOL-30402","price":19.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-304-b-pumpsprueher-2-liter.png?v=1769855171"},{"product_id":"solo-cleanline-305-a-b-pumpsprueher-5-liter","title":"CLEANLine (305 A \/ B) Pump Sprayer 5 Litre","description":"\u003ch2\u003eDose chemicals cleanly, wet surfaces with control: Solo CLEANLine (305 A \/ B) — Pump Sprayer 5 Litre \u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe Solo CLEANLine (305 A \/ B) Pump Sprayer 5 Litre is a rugged pressure sprayer that pushes up to 3 bar, with a flat-jet nozzle and chemical-resistant seals – pick the 305 A for acidic chemistry (pH 1–7) or the 305 B for alkaline chemistry (pH 7–14).\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSolo CLEANLine (305 A \/ B) — Pump Sprayer 5 Litre\u003c\/strong\u003e is exactly the tool that makes the difference in detailing when “just spray it somehow” doesn’t cut it: you want to lay down cleaner on purpose, evenly and repeatably – no overspray orgy, no burning through product, no chemistry eating your seals alive. The 5-litre tank, the oversized piston pump and the chemical-resistant flat-jet nozzle are built for pro work – whether it’s pre-wash, degreasing, workshop or vehicle cleaning. The variant is what matters: the 305 A runs FKM (Viton) for the acidic side, the 305 B runs EPDM for alkaline cleaners.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe right seal for the right chemistry.\u003c\/strong\u003e The 305 A (FKM\/Viton) is meant for acidic media in the pH 1–7 range, the 305 B (EPDM) for alkaline media in the pH 7–14 range – so the sprayer stays “tight” long-term and you work reliably instead of improvising.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA controlled spray pattern instead of mist lottery.\u003c\/strong\u003e The flat-jet nozzle lays the liquid down in an even band – ideal when you want to wet a surface without dragging everything around it into the mix. That saves your nerves (and usually product too), because you hit the target more precisely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast pressure build-up, comfortable handling.\u003c\/strong\u003e You hit the max of 3 bar with just a few pump strokes; add a base foot, a carry strap and a built-in safety\/relief valve for controlled pressure release – designed like a pro tool, not “DIY-store plastic”.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFKM vs. EPDM seals: pH range, chemical resistance and why it matters in detailing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFKM (Viton) and EPDM\u003c\/strong\u003e aren’t just two strings of letters – they’re the reason the Solo CLEANLine (305 A \/ B) Pump Sprayer 5 Litre saves you so much grief day-to-day. Depending on the job, detailing throws very different formulas at you: wheel cleaners tend to lean acidic, while lots of pre-cleaners and all-purpose cleaners lean alkaline, and then you’ve got alcohol-based mixes or degreasers on top. This is exactly where SOLO splits the variants strictly by use: the 305 A is intended for acidic media in the pH 1–7 range and runs FKM seals; the 305 B is meant for alkaline media in the pH 7–14 range and uses EPDM. That’s not a marketing gimmick, it’s materials science: elastomers behave differently depending on the chemistry – and the best pump is useless if the seals swell, harden or simply start leaking. So if you regularly switch between “more acidic” and “more alkaline”, matching them up properly is the basis for predictable results and stress-free work.\u003c\/p\u003e\n\u003ch3\u003eUse in detailing: pre-wash, wheels, engine bay \u0026amp; workshop – how to really use 5 litres efficiently\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePre-wash and alkaline cleaners\u003c\/strong\u003e are the sweet spot for a lot of people – and that’s exactly what the 305 B (EPDM, pH 7–14) is built for: you wet large panels fast and evenly, let the surfactants do their thing and cut down on mechanical contact in the next step, because the dirt has already been “loosened”. For acidic jobs (depending on the product logic, e.g. when you’re going after limescale or certain mineral deposits) the 305 A (FKM, pH 1–7) fits – the key is to always stick to the intended medium instead of playing “it’ll probably be fine”. Day-to-day that means: you use the sprayer as an application tool, not a stand-in for a foam lance. For real foam dwell time you grab a dedicated foam sprayer; the CLEANLine 305 is made to lay liquids down under control.\u003c\/p\u003e\n\u003ch3\u003eSpray pattern, 3 bar build-up and handling: why the CLEANLine 305 A\/B feels so “pro”\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3 bar working pressure and a flat-jet nozzle\u003c\/strong\u003e are the combo that just works day in, day out: you get an even film of liquid instead of a random landscape of droplets. Max spray pressure sits at 3 bar; the oversized piston pump builds it up in just a few strokes – you notice that straight away when you’re working larger panels and don’t want to top up the pressure every 20 seconds. The 5-litre tank is deliberately built tough; the CLEANLine catalogue highlights, among other things, the very high tank robustness for the 305 models (including a 7 mm wall thickness) plus a carry strap, a base foot and ergonomic controls. In practice that means: a stable stance while pumping, clean handling when you move it around and less “fiddling” during breaks, because the lance can be stowed properly. The key specs are clearly trimmed for everyday work too: 5 L nominal volume, a 50 cm spray tube and a 1.4 m hose, plus an empty weight of around 2.6 kg (depending on model\/spec) – compact enough for the car, but big enough for serious surfaces. And yes: a safety\/relief valve for releasing pressure is part of the deal, so you can let the pressure off under control instead of fighting the cap.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"solo","offers":[{"title":"2 liters \/ Acid (pH 1-7) 305 A","offer_id":56938499080527,"sku":"D1-SOL-30505","price":63.49,"currency_code":"EUR","in_stock":true},{"title":"2 liters \/ Alkaline (pH 7-14) 305 B","offer_id":56938499047759,"sku":"D1-SOL-30506","price":63.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-305-b-pumpsprueher-5-liter.png?v=1769856475"},{"product_id":"sonax-profiline-druckpumpzerstauber-fur-losemittel-spruhflasche","title":"PROFILINE DruckpumpZerstäuber \"Lösemittel\" Spray Bottle","description":"\u003ch2\u003eWorking safely with solvents in your detailing operation — the SONAX PROFILINE DruckpumpZerstäuber \"Lösemittel\" on the job\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhy do you need a dedicated spray bottle for solvents? Standard plastic bottles dissolve on contact with IPA, acetone or other organic solvents — a solvent-resistant pressure pump spray bottle is a must in any professional detailing operation.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIf you work with IPA cleaner, surface prep or other solvent-based products day in, day out, you know the problem: cheap spray bottles swell up, crack or clog after a short while — worst case, the bottle leaks and the solvent damages your paintwork, your gear, or puts your people at risk. The \u003cstrong\u003eSONAX PROFILINE DruckpumpZerstäuber \"Lösemittel\"\u003c\/strong\u003e is a pro spray bottle built specifically for safe use with solvent-based products. It's made from materials that are chemically resistant to organic solvents, so it gives you the day-to-day reliability a professional shop needs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolvent-resistant materials for long-term use.\u003c\/strong\u003e The sprayer is made from chemically resistant plastics that play nicely with organic solvents like isopropyl alcohol, butanone or other cleaning solvents. No swelling, no softening of the seals, no plasticisers bleeding into your fill product — the material combo keeps handling safe for the full life of the bottle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure pump mechanism for an even spray.\u003c\/strong\u003e The pressure pump system lays down a precise, even mist on the target surface. Unlike a basic trigger bottle, the pressure pump puts out a consistent fan that wets the surface fully and evenly — ideal for IPA prep before ceramic coatings, or for surface cleaners before you lay down a protective product.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear labelling for a safe, organised shop.\u003c\/strong\u003e In a working shop, solvent containers have to be clearly marked and kept apart from other products. The DruckpumpZerstäuber \"Lösemittel\" is clearly labelled for its job, which stops mix-ups with the \u003ca href=\"\/products\/sonax-profiline-druckpumpzerstauber-fur-sauren-alkalien-spruhflasche\"\u003ePROFILINE DruckpumpZerstäuber \"Säuren+Alkalien\"\u003c\/a\u003e or other bottles on the bench and keeps everyone safer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Only ever fill the sprayer with the product classes printed on the label, and never mix different solvents. Give the bottle a quick shake after filling to make sure no air-solvent pocket is messing with the spray mechanism. Always store filled solvent bottles upright and closed — including when you carry them between work stations.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMaterial chemistry and build — why solvent-resistant spray bottles are non-negotiable in a pro setup\u003c\/h3\u003e\n\n\u003cp\u003eMost off-the-shelf spray bottles are made from PE (polyethylene) or PET and built for water-based cleaning solutions. Those materials don't react well to organic solvents: isopropyl alcohol attacks PET seals and changes their elasticity; ketones like acetone dissolve PET structures and can eat into the bottle wall. That means leaks, warped spray heads and, worst case, product escaping — a serious safety risk in a commercial shop.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/products\/sonax-profiline-druckpumpzerstauber-fur-losemittel-spruhflasche\"\u003ePROFILINE DruckpumpZerstäuber \"Lösemittel\"\u003c\/a\u003e uses a material combination built for organic solvents. Every wetted part — bottle body, dip tube, pump mechanism and seals — is made from solvent-resistant materials. That choice stops any chemical reaction between the container and the fill product, and makes sure no plastic particles or plasticisers end up in the solution you then put on the car.\u003c\/p\u003e\n\n\u003cp\u003eThe pressure pump technology has another edge over a simple trigger: the built-up pressure stays constant between sprays, which gives you a more even spray with a finer droplet size. For IPA work, that means a more even wetting of the surface, which improves how well it degreases and keeps product use in check. A trigger sprayer would fail far more often with solvent-based products thanks to material fatigue or swelling damage.\u003c\/p\u003e\n\n\u003cp\u003eOne more thing worth flagging: maintenance. A pressure pump spray bottle with solvent-resistant seals flushes out easily with fresh solvent or water when you want to switch products. The seals keep their elasticity even after plenty of fill-and-empty cycles, which stretches the working life right out. Compared to disposable bottles or cheap plastic sprayers, a professional spray bottle pays for itself over time — both on the wallet and in terms of consistent output quality in the shop.\u003c\/p\u003e\n\n\u003cp\u003eIf you want to get the most life out of your pressure pump spray bottle, give it a couple of pumps and check the pressure after a longer break — say, after the shop's been closed for a holiday or a weekend without use. Solvent-based products can turn slightly viscous when they sit, and that makes the spray head sluggish. A quick flush with fresh product brings the pump mechanism back to its best. The general rule: a spray bottle that's used and looked after regularly lasts far longer in pro use than one that only comes out now and then and gets left half-full between jobs. Look after your gear on purpose and you get reliable function long-term, save on replacements and dodge unexpected failures mid-detail — a small thing, but one you really feel in the day-to-day.\u003c\/p\u003e\n\n\u003ch3\u003eWhere it fits in the detailing workflow — which products belong in the solvent sprayer\u003c\/h3\u003e\n\n\u003cp\u003eThe main job for the solvent sprayer in detailing is surface prep before sealants and coatings. Isopropyl alcohol (IPA) at 70–99% strength gets sprayed in measured doses onto the surface you're about to seal from a solvent-resistant sprayer, then wiped off with a microfibre cloth. This step pulls off wax residue, dressing leftovers and oily films that would otherwise hurt the bond of ceramic coatings or sealant products.\u003c\/p\u003e\n\n\u003cp\u003eAlongside IPA, the solvent sprayer often holds solvent-based surface cleaners and panel-wipe products. These formulas carry organic solvent blends that specifically dissolve silicone residue, oils and polishing leftovers on the paint. For proper application, a fine, even mist is the key, because too much product in one spot is hard to polish out and overly long dwell times can attack the clearcoat.\u003c\/p\u003e\n\n\u003cp\u003eA dedicated solvent sprayer also makes sense when you're using coating thinners, or when you're degreasing applicator pads and tools. A clearly labelled sprayer stops you reaching for the wrong product for surface prep by mistake — an error that, with a water-based product instead of IPA before a ceramic coating, leads to poor adhesion and early failure of the protective layer.\u003c\/p\u003e\n\n\u003cp\u003eThe basic rule when filling: only put in products that match the stated product class. The IPA concentration matters little for material resistance — both neat 99% IPA and diluted 70% mixes are no problem in the solvent sprayer. What matters is that no strongly oxidising substances or halogenated solvents go in, since those need a different material resistance and could damage the standard solvent sprayer. If in doubt, go for the \"Lösemittelbeständig\" variant for especially aggressive formulas.\u003c\/p\u003e\n\n\u003cp\u003eFor operations running several people, a colour or number code on top of the product-class label is worth adding. That way everyone can tell at a glance which bottle holds which product — especially when different IPA concentrations or different solvent cleaners are in use side by side. This consistent bottle-management system is a simple but effective bit of quality control in detailing.\u003c\/p\u003e\n\n\u003ch3\u003eErgonomics and handling in the daily grind — practical sides of the pressure pump spray bottle\u003c\/h3\u003e\n\n\u003cp\u003eA professional pressure pump sprayer gives you a real ergonomic edge over standard trigger sprayers: the pressure pump lets you dose precisely with less hand effort. Anyone prepping a lot of car surfaces every day knows that a badly set-up trigger sprayer wears out the hand and forearm over time. The pressure pump builds pressure as you pump and releases it evenly when you pull the lever — fewer cycles, a more even result.\u003c\/p\u003e\n\n\u003cp\u003eFor an optimal spray pattern, the nozzle head on many professional pressure pump spray bottles switches between a tight, focused stream and a fine, even mist. The fine mist is ideal for prepping large body panels; the directed stream is handy for precise work in shut lines, on door edges or in hard-to-reach areas of the body. This handy adjustment gives you full, precise control over how much you apply, your spray radius and exactly where it lands.\u003c\/p\u003e\n\n\u003cp\u003eLabelling the sprayer by product class is a critical safety point in the daily grind. A well-organised detailing shop keeps several different spray bottles for different product classes: solvent-based products, acid- and alkali-resistant cleaners, and water-based formulas all live in separate bottles. Clear, product-class-specific labelling — like with the PROFILINE DruckpumpZerstäuber system — stops mix-ups and protects both your people and the car surfaces from accidental chemical contact.\u003c\/p\u003e\n\n\u003cp\u003eFor storage, a fixed spot on the trolley or a holder is the way to go. The \u003ca href=\"\/products\/sonax-profiline-werkstattwagen-by-hazet-werkstattwagen\"\u003ePROFILINE Werkstattwagen \"by Hazet\"\u003c\/a\u003e has stainless-steel trays built specifically for storing spray bottles holding solvents and cleaners safely. This pairing of spray bottle and trolley is the professional answer for a clean, safe shop setup.\u003c\/p\u003e\n\n\u003cp\u003eAs a basic rule: spray bottles holding solvents don't belong in direct sun or near heat sources. The vapour pressure of organic solvents climbs with temperature, which worst case leads to pressure building inside the bottle and a stiffer or leaky pump. Storing it in the shade on an easy-to-reach trolley protects both the product and the sprayer, and lines up with good safety practice for handling organic solvents in a commercial setting.\u003c\/p\u003e\n\n\u003ch3\u003eDruckpumpZerstäuber \"Lösemittel\" vs. \"Säuren+Alkalien\" vs. \"Lösemittelbeständig\" — the right bottle for every product\u003c\/h3\u003e\n\n\u003cp\u003eThe three PROFILINE DruckpumpZerstäuber variants are not interchangeable — they differ in their chemical resistance and are built for specific product classes. The DruckpumpZerstäuber \"Lösemittel\" is designed for organic solvents like IPA, acetates, ketones and aliphatic hydrocarbons. It's not built for strongly acidic or alkaline cleaners, since those product classes need a different material resistance.\u003c\/p\u003e\n\n\u003cp\u003eFor aggressive cleaners like wheel cleaner, iron remover or alkaline shampoo concentrates, the \u003ca href=\"\/products\/sonax-profiline-druckpumpzerstauber-fur-sauren-alkalien-spruhflasche\"\u003ePROFILINE DruckpumpZerstäuber \"Säuren+Alkalien\"\u003c\/a\u003e is the right call. It's made from materials that stand up to the pH extremes of acidic and alkaline cleaning products. Using a solvent bottle for acid-based products or the other way round can lead to early material failure and is a safety hazard.\u003c\/p\u003e\n\n\u003cp\u003eA common mistake out there: plenty of shops use a single bottle for every liquid cleaner and hope the material will \"somehow cope\". With water-based, pH-neutral products that can go fine for a while, but the moment concentrated acids like wheel cleaner or alkaline pressure-wash chemicals go into a standard plastic bottle, the material attack starts straight away. Cracked seals, leaky pumps and product contamination from dissolved plastic are the usual results. A deliberate bottle-management system by product class — exactly what the PROFILINE range makes possible — is the reliable fix for a problem every shop runs into.\u003c\/p\u003e\n\n\u003cp\u003eOn top of that, there's the PROFILINE DruckpumpZerstäuber \"Lösemittelbeständig\" — a variant offering even broader chemical resistance, built for especially aggressive solvent blends. For most IPA and standard solvent jobs in detailing, the \"Lösemittel\" variant is plenty; but if you work with halogenated solvents or very aggressive products, go for the \"Lösemittelbeständig\" variant.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice — which operations and uses the solvent sprayer is the right pick for\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE DruckpumpZerstäuber \"Lösemittel\"\u003c\/strong\u003e is the right pick for any detailing operation working professionally with IPA or other solvent-based prep products. Coating installers degreasing and prepping cars every day get the most out of the reliable, chemically resistant build. A single material failure or product spill from an unsuitable cheap bottle can cost far more than the price of a professional spray bottle.\u003c\/p\u003e\n\n\u003cp\u003eFor valeting and car-care services regularly running IPA-based quick cleaners or solvent-based glass cleaners, the sprayer is just as suitable. The clear product-class labelling makes training new people easier and cuts the risk of misfills in the daily run. Investing in the professional spray-bottle system from SONAX PROFILINE is investing in safety and in the quality of the surfaces you work on.\u003c\/p\u003e\n\n\u003cp\u003eFor detailers just stepping into the professional side, now's the right time to build your spray-bottle system properly from the start. Get into class-specific bottles early and you build good habits and dodge expensive mistakes from material mix-ups right from the off. The bar is low: a solvent sprayer for IPA and a Säuren+Alkalien sprayer for wheel cleaner and iron remover already lay the foundation of a safe, professionally organised bench. Take that step on purpose and you work at a pro level from day one — with gear that's genuinely up to the demands of daily use.\u003c\/p\u003e\n\n\u003cp\u003eIf you prep several cars a day or work in a team, keep at least two solvent sprayers on hand: one filled with high-strength IPA for pre-coating treatments and one with a solvent-based panel wipe for general degreasing steps. This small investment cuts out waiting and makes sure the right product is always within reach, without having to empty and refill the sprayer first. Especially on a detail where time is a real cost factor, that bit of forward planning pays off.\u003c\/p\u003e\n\n\u003cp\u003eAs a verified SONAX dealer, Detailing1 stocks all three PROFILINE DruckpumpZerstäuber variants. If you're not sure which bottle is right for which product, you're welcome to get advice by email or phone. For a full shop setup, we'd suggest combining several sprayers across different product classes plus a suitable storage system like the PROFILINE Werkstattwagen — together they form the foundation of a cleanly organised, safe and lastingly capable detailing bench.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1 piece","offer_id":57345155105103,"sku":"D1-SNX-4961050","price":36.89,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-druckpumpzerstauber-fur-losemittel_1-stueck.png?v=1774736538"},{"product_id":"sonax-profiline-druckpumpzerstauber-fur-sauren-alkalien-spruhflasche","title":"PROFILINE DruckpumpZerstäuber \"Acids+Alkalis\" Spray Bottle","description":"\u003ch2\u003eLay down acids and alkalis safely and precisely with the SONAX PROFILINE DruckpumpZerstäuber\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat do I need the SONAX PROFILINE DruckpumpZerstäuber for? The 1.5-litre pressure sprayer is built specifically for acid- and alkali-based cleaning and care products — with a 2.5 bar safety valve, a lock in the handle and two spray nozzles for precise dosing in professional use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn professional detailing and vehicle reconditioning, aggressive cleaners are part of the daily grind: low-pH wheel cleaners, iron removers, bug removers or alkaline heavy-duty cleaners get used every day to shift stubborn grime that ordinary all-rounders simply won't touch. The catch with these products: they're chemically aggressive and they make real demands on your spray gear. Ordinary plastic spray bottles aren't built for acids and strong alkalis — the chemistry attacks the seals, valves and container material, which leads to leaks, failures and the risk of splash accidents. The \u003cstrong\u003eSONAX PROFILINE DruckpumpZerstäuber\u003c\/strong\u003e for acids+alkalis was developed for exactly this job: a pressure pump sprayer made from acid- and alkali-resistant materials, with a safety valve set to 2.5 bar, a safety lock in the handle and two swappable spray nozzles for precise dosing. For detailers who work with aggressive chemistry day in, day out, it's an indispensable tool.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAcid- and alkali-resistant materials for handling aggressive chemistry safely.\u003c\/strong\u003e The seals, container and every product-contact part of the sprayer are built for use with acid- and alkali-based cleaning and care products. That means no leaks from chemical reaction, no seals going brittle and no swelling of the container material — even with frequent use over years.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.5 bar safety valve and a lock in the handle — for safe work.\u003c\/strong\u003e The built-in pressure limiter makes sure the container never gets filled beyond the permitted working pressure. The safety lock in the handle stops accidental spraying during transport or storage. Both safety mechanisms matter especially with aggressive products that can cause irritation on skin contact.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo spray nozzles for different application needs.\u003c\/strong\u003e The adjustable cone nozzle gives you a precise, concentrated jet for targeted surface wetting. The flat-jet nozzle produces a wide, even fan for treating larger surfaces like door sills, wheel arches or wheels. Swapping between the two nozzles is easy, which turns the sprayer into a versatile tool for all sorts of situations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Label the sprayer clearly with the name of the product inside — never put different products into the same container, even if it's been completely emptied and rinsed, since residues can trigger unexpected reactions. After every working day, empty the container, rinse it several times with clean water and spray it out fully with the nozzle open before you use it for the next product. Never run solvent-based products in this model — for those there's the PROFILINE DruckpumpZerstäuber \"Solvents\" with the right material mix.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePressure pump sprayer for pros — why material resistance is decisive when working with chemicals\u003c\/h3\u003e\n\u003cp\u003eMost consumers know simple plastic spray bottles — they're cheap, light and perfectly fine for everyday cleaners. But in a professional setting with acidic or alkaline products, those bottles fail regularly: polyethylene containers swell under acid, standard EPDM or rubber sealing rings get attacked by alkalis, and the valve mechanisms lose their spray quality after a short time with aggressive products. That's not just annoying — worn seals can cause uncontrolled leaks, and with skin-aggressive products that's a genuine safety risk. The \u003cstrong\u003eSONAX PROFILINE DruckpumpZerstäuber\u003c\/strong\u003e uses materials for all product-contact components that are specifically designed for contact with acidic and alkaline media. The container, seals, valve body and spray nozzles have been developed and tested for this field of use.\u003c\/p\u003e\n\u003cp\u003eThe pressure pump mechanism has clear advantages over simple spray bottles with a trigger pump for professional use: you pressurise the container once (by pumping the plunger), and then you can spray continuously at even pressure without having to work the trigger over and over for every burst. That gives you more even product distribution, less hand strain on long jobs and saves time thanks to the continuous spray flow. The 2.5 bar safety valve automatically limits the maximum operating pressure — an important safety feature that stops the container being over-pumped and structurally stressed. The large filling opening makes it easy to fill safely from a canister or measuring jug without the risk of spillage. Compared to portable pressure washers, the pressure sprayer has clear advantages for chemical cleaners: it doses the chemical precisely and sparingly, builds no overpressure that drives product into unwanted areas, and lets you work in a targeted way on specifically defined surfaces. For detailing chemistry, controlled dosing matters more than pressure — and the pressure sprayer delivers exactly that.\u003c\/p\u003e\n\u003cp\u003eFor commercial use the 1.5-litre capacity is well chosen: it's big enough to cover a full job on a vehicle (e.g. a complete wheel cleaning across all four wheels) without refilling, and small enough to stay manageable and ergonomic. For even larger work volumes there are professional pressure-pump system sprayers, but for most detailers the 1.5-litre capacity is the most practical solution. The container's stable footing is a practical detail that makes a real difference in day-to-day work: a steady pressure sprayer can be set down on the floor or a worktop without tipping over — it sounds like a small thing, but with daily use across several vehicles it's a genuine help.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of use — which products and jobs this sprayer suits\u003c\/h3\u003e\n\u003cp\u003eThe pressure sprayer is built for all SONAX cleaning and care products that work in the acidic or alkaline pH range. Typical uses are wheel cleaning with a strongly acidic wheel cleaner like the XTREME Felgen-Reiniger PLUS: you fill the cleaner into the sprayer and lay it down evenly on the wheels — the continuous spray flow of the pressure sprayer gives you far more efficient wetting of every part of the wheel than a simple spray head. It's just as good for applying bug removers, iron removers and other acidic or alkaline cleaners.\u003c\/p\u003e\n\u003cp\u003eIn paint reconditioning, the sprayer is used to apply iron removers, which have a low pH and need to dwell on the paint to react fully. The pressure sprayer produces a fine, even mist that spreads the cleaner thinly and evenly — far more efficient than applying it with a cloth or a simple spray bottle. For wheel-arch and underbody cleaning with alkaline heavy-duty cleaners, the flat-jet fan of the right nozzle is perfect: it covers large surfaces fast and allows a thorough pre-treatment before pressure rinsing. Another typical job is laying bug remover down on the bonnet and front end before washing: here the pressure sprayer helps spread the product evenly across the whole surface and gives it the dwell time it needs before you start washing. Especially on vehicles with heavy bug splatter — typical after long summer motorway runs — even surface wetting with the pressure sprayer saves a lot of time and material compared to going on by hand.\u003c\/p\u003e\n\u003cp\u003eWhat you must not use in the DruckpumpZerstäuber for acids+alkalis: solvent-based products. For that product category there are separate models — the \u003ca href=\"\/products\/sonax-profiline-druckpumpzerstauber-fur-losemittel-spru\"\u003ePROFILINE DruckpumpZerstäuber \"Solvents\"\u003c\/a\u003e and the \u003ca href=\"\/products\/sonax-profiline-druckpumpzerstauber-losemittelbestandig\"\u003ePROFILINE DruckpumpZerstäuber \"Solvent-resistant\"\u003c\/a\u003e — with materials made specifically for organic solvents. Using the wrong sprayer with the wrong product can lead to fast material damage and potentially dangerous leaks. Matching them up right — the acids+alkalis sprayer for water-based aggressive products, the solvent sprayer for organic solvents — is therefore an important safety rule in professional operation.\u003c\/p\u003e\n\n\u003ch3\u003eOperating and maintaining the DruckpumpZerstäuber properly — safety and longevity in daily use\u003c\/h3\u003e\n\u003cp\u003eOperating a pressure pump sprayer is simple, but a few basic rules are worth knowing. Before filling, fully depressurise the container — if there's pressure in it, release it by briefly working the spray trigger. Unscrew the valve body from the container by turning it left, fill the container up to the maximum level mark (don't overfill — you need air space for pressure to build) and screw the valve body back in. Then pump the plunger up and down to build up the working pressure you want. The safety valve automatically limits the pressure to 2.5 bar — when you feel noticeable resistance while pumping and air escapes through the valve, you've hit maximum pressure.\u003c\/p\u003e\n\u003cp\u003eCleaning the sprayer after every working day is an important step for longevity. Aggressive chemistry left in the container can, even with resistant builds, wear on seals and metal parts over time. The cleaning routine is simple: empty any leftover product out of the container (dispose of it per the manufacturer's instructions for that product), rinse the container several times with clean water and empty it by spraying it out fully. The nozzle deserves special attention here: blocked or etched nozzle holes change the spray pattern and should be checked regularly. For blocked nozzles, a short soak in clean water and a careful flush-through helps — never poke into the nozzle openings with sharp objects. Checking the seals every few months — whether they're still flexible and crack-free — is also worth doing, to make sure operational safety is guaranteed across the whole period of use.\u003c\/p\u003e\n\u003cp\u003eFor professional operation a fixed system with several sprayers makes sense — at least one each for acids+alkalis, one for solvents and one for general products. Every sprayer should be permanently labelled to show the product it holds. That prevents mix-ups in daily work, which can cause both chemical reactions in the container and unexpected results when the product goes on the vehicle. Some shops use different colour codes for the caps or labels of the sprayers — a simple system that's proven its worth in everyday use.\u003c\/p\u003e\n\n\u003ch3\u003ePressure sprayers compared — pro pressure pump vs. spray bottle vs. Sprayboy\u003c\/h3\u003e\n\u003cp\u003eIn the pro reconditioning world there are several spraying concepts with different strengths. The simplest variant is the PROFILINE Sprayboy — a hand spray bottle with no pressure pump, ideal for quick, targeted use of single products in small amounts. The Sprayboy is cheap, light and easy to handle, but it needs a trigger pull for every burst and builds no constant spray flow. For daily work with large product volumes and frequent spraying it's less ergonomic than a pressure pump sprayer. The PROFILINE DruckpumpZerstäuber fills that gap: it lets you spray continuously without trigger effort, gives more even wetting through controlled pressure build-up, and offers more capacity for longer jobs.\u003c\/p\u003e\n\u003cp\u003eAnother option for foam products is the \u003ca href=\"\/products\/sonax-profiline-powerfoamer-schaumzerstauber\"\u003ePROFILINE PowerFoamer Schaumzerstäuber\u003c\/a\u003e — this one uses a special nozzle technology to create an active foam that clings to the surface and extends the cleaner's dwell time. For products meant to be applied as foam (shampoo pre-wash, foam cleaners for sills), the PowerFoamer is the better choice. The DruckpumpZerstäuber for acids+alkalis, by contrast, is meant for products applied as a liquid mist or flat jet — no foaming, just even liquid distribution. Choosing the right sprayer for the job makes a noticeable difference in the result and in product efficiency. Anyone who keeps several sprayers for different product categories in the shop always has the optimal tool to hand for the job at hand — that's a mark of professional work organisation that shows up directly in the quality of the result and in working speed.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice — who the DruckpumpZerstäuber is indispensable for\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE DruckpumpZerstäuber\u003c\/strong\u003e for acids+alkalis is indispensable for all professional detailers and demanding home users who regularly work with acidic or alkaline cleaners. For a detailing shop that treats vehicles daily with wheel cleaner, bug remover and iron remover, the sprayer is a tool that quickly pays for itself through the quality boost in the spray pattern, the reduced hand strain and the longer service life thanks to chemical-resistant materials. For the ambitious hobby detailer who wants to professionalise their reconditioning, switching from a simple spray bottle to a pressure pump sprayer is one of the easiest and most effective upgrades to the tool kit — the difference in even product distribution is visible straight away, and the safety features make handling aggressive chemistry far more carefree.\u003c\/p\u003e\n\u003cp\u003eAnother aspect that separates cheap accessories from a pro tool is reusability over years: cheap spray bottles spring leaks within a few months of frequent contact with aggressive chemistry and have to be replaced. The PROFILINE DruckpumpZerstäuber is built for years of use and so pays back its higher price against frequent replacement of inferior alternatives. For a professional operation this investment pays off after the first season already. Anyone working in a business with several staff benefits especially from the clear colour coding and labelling of the different SONAX sprayer models: the acids+alkalis sprayer, the solvent sprayer and the solvent-resistant sprayer are deliberately styled differently so no mix-ups happen in daily work. At Detailing1 you'll find all models of the SONAX PROFILINE pressure pump sprayers in the range, along with the matching cleaning accessories and advice on which model is right for which area of use. For the most common acidic-range job — wheel cleaning, iron removal — the DruckpumpZerstäuber for acids+alkalis is the first choice in the pro reconditioning workflow. Anyone who looks after their sprayer long-term and uses it properly has a tool that works reliably for many years and makes the difference between imprecise everyday work and professionally controlled results. Buying a high-quality pressure pump sprayer is one of the most straightforward upgrades a detailer can make to their tool kit — cheap to buy, high in added value, and felt in the result straight away. With the PROFILINE DruckpumpZerstäuber for acids+alkalis you've always got the right tool to hand for all acid- and alkali-based SONAX products.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1 piece","offer_id":57345155236175,"sku":"D1-SNX-4960050","price":36.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-druckpumpzerstauber-fur-sauren-alkalien_1-stueck.png?v=1774736541"},{"product_id":"dr-wack-p21s-druck-sprueher-zubehoer","title":"P21S \"Pressure Sprayer\" Pressure Sprayer","description":"\u003ch2 id=\"speakable-headline\"\u003eP21S Felgenreiniger sauber und gleichmäßig aus dem Nachfüllgebinde auftragen\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eDer P21S Druck-Sprüher ist ein Aufsprüh-Zubehör für P21S Felgenreiniger aus den Nachfüllgebinden. Er bringt das Gel mit breitem Sprühbild in Sekunden auf die Felge. Er ist kein Reiniger und nicht für lösemittelhaltige oder aggressive Mittel wie Bremsenreiniger geeignet.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eDer P21S Druck-Sprüher\u003c\/strong\u003e ist ein Drucksprüher, mit dem du P21S Felgenreiniger aus den großen Nachfüllgebinden aufträgst. Du pumpst Druck auf, drückst den Hebel und verteilst das Gel mit einem breiten, gleichmäßigen Sprühbild über die Felge. Eine Feststelltaste hält den Hebel bei größeren Flächen gedrückt, damit deine Hand nicht ermüdet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreites Sprühbild.\u003c\/strong\u003e Der Sprühkopf verteilt den Reiniger flächig statt punktuell. So bekommst du Speichen, Felgenbett und Felgenstern in wenigen Zügen benetzt, ohne nachzuziehen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGemacht für Nachfüllgebinde.\u003c\/strong\u003e Die P21S Felgenreiniger gibt es als günstige Großgebinde ohne eigene Sprühpistole. Mit dem Druck-Sprüher trägst du sie genauso komfortabel auf wie aus der kleinen Flasche.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeststelltaste für Dauerbetrieb.\u003c\/strong\u003e Wenn du mehrere Räder am Stück machst, fixierst du den Hebel und arbeitest durch. Das spart Kraft und sorgt für einen konstanten Sprühstrahl.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePraxistipp von Detailing1:\u003c\/strong\u003e Befülle den Sprüher nur mit P21S Felgenreiniger und niemals mit Bremsenreiniger, Waschbenzin oder ähnlichen Lösemitteln. Diese greifen die Dichtungen an und der Sprüher wird undicht. Wer den Sprüher zweckentfremdet, ruiniert ihn schnell. Spüle ihn nach dem Einsatz mit klarem Wasser durch, dann bleibt der Sprühkopf frei.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eAnwendung\u003c\/h3\u003e\n\u003cp\u003eFülle den Reiniger ein, verschließe den Behälter fest und baue mit der Pumpe Druck auf. Dann sprühst du das Gel gleichmäßig auf die vorgereinigte, handwarme bis kühle Felge.\u003c\/p\u003e\n\u003cp\u003eMit der Feststelltaste kannst du den Hebel arretieren, um durchgehend zu sprühen. Lass den Reiniger laut Produktanleitung einwirken, arbeite ihn bei Bedarf mit einer Bürste nach und spüle gründlich ab. Wir bei Detailing1 lassen nach dem letzten Rad den Restdruck ab und spülen den Sprüher kurz mit Wasser durch.\u003c\/p\u003e\n\u003ch3\u003eGrenzen\u003c\/h3\u003e\n\u003cp\u003eDer Druck-Sprüher ist reines Zubehör und enthält selbst keinen Reiniger. Er ist ausdrücklich nicht für lösemittelhaltige oder aggressive Produkte wie Bremsenreiniger oder Waschbenzin gedacht. Für solche Mittel brauchst du einen chemikalienbeständigen Sprüher.\u003c\/p\u003e\n\u003ch3\u003eZielgruppe\u003c\/h3\u003e\n\u003cp\u003ePasst für alle, die P21S Felgenreiniger in den Nachfüllgebinden kaufen und sauber sowie zügig auftragen wollen. Wer ohnehin nur kleine Sprühflaschen nutzt, braucht ihn nicht zwingend, profitiert aber vom gleichmäßigen Sprühbild.\u003c\/p\u003e","brand":"Dr. Wack \"P21S\"","offers":[{"title":"1 Stück \/ 925 ml","offer_id":58087442710863,"sku":"D1-DRW-8007","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/dr-wack-p21s-druck-sprueher-zubehoer.png?v=1787867500"},{"product_id":"ik-sprayers-druckpumpzerstaeuber-ik-hc-1-5","title":"iK Sprayers \"iK HC\" 1.5 Pressure Sprayer for Solvents","description":"\u003ch2 id=\"speakable-headline\"\u003eSolvents swell seals. Not in this pressure sprayer.\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the iK HC 1.5? A hand pressure sprayer holding 1 litre of usable volume, with seals and components built for oils, hydrocarbon solvents and petroleum products. Not meant for acids, not for many halogenated solvents, and not for brake cleaners with alcohol or acetone in the mix.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eiK Sprayers \"iK HC\" 1.5 Druckpumpzerstäuber für Lösungsmittel\u003c\/strong\u003e is a \u003cstrong\u003epressure sprayer\u003c\/strong\u003e from Spanish manufacturer Goizper that lets you dose brake cleaner, tar remover, panel wipe and oils straight from the canister. You pump the tank up by hand and a safety valve caps it at 2.5 bar. The adjustable cone nozzle puts out about 0.7 litres per minute according to Goizper.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eThe seals are the actual product.\u003c\/strong\u003e Body, piston and sealing rings on the HC are matched to oils and hydrocarbon solvents, the cousins of petrol that cut grease because they are greasy themselves. Goizper lists 4 groups as optimal: solvent-based products, alcohols, oils and petroleum by-products. What you notice: tar, wax residue and silicone come off, and the lever stays smooth.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e1 litre working volume, fifteen strokes.\u003c\/strong\u003e The tank holds 1.5 litres and you fill to the 1-litre mark. The rest stays as an air cushion, and without it no pressure builds. After fifteen strokes it sprays steadily, and 1 litre gives you a good minute and a half of continuous spray at 0.7 l\/min.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eStrips down without tools.\u003c\/strong\u003e Pump and seals come apart by hand, and Goizper sells service and spare parts separately. Day to day that means: when the seal gets tired after a few years, you swap the seal instead of the whole unit. At 28.99 EUR that pays off the first time you do it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e What we see day-to-day is that the mistake which kills most sprayers happens after the job. Leave the last of your brake cleaner sitting under 2.5 bar overnight and you give the piston seal hours to soak itself full. Elastomers swell up like a sponge, the piston goes oversize, and the lever barely moves. That is exactly how the messages reach us: the sprayer looks spotless from the outside, but it will not actuate and it will not spray. So after every job: release the pressure, pour the rest back into the canister, flush it with water, leave it open to dry.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eOne litre in, fifteen strokes, then it sprays steadily\u003c\/h3\u003e\n\n\u003cp\u003eFill the tank to the 1-litre mark, screw the lid on and pump fifteen times. The safety valve blows off at 2.5 bar, so you cannot overpump it.\u003c\/p\u003e\n\n\u003cp\u003eThe cone nozzle turns steplessly from fine mist to a tight jet. For tar on a sill edge you take the jet and work bottom-up, so the dissolved gunk does not run back over the part you just cleaned. For panel wipe before sealing, the mist is enough, because all you want there is a whisper-thin film and every extra drop shows up later as a streak.\u003c\/p\u003e\n\n\u003cp\u003eWhat belongs in the tank is what you would otherwise spray from an aerosol: brake cleaner on a pure hydrocarbon base, tar and adhesive removers, silicone remover before paint prep, panel wipe and thin oils. Buy it by the canister, decant it here, and you work the same chemistry far more precisely, because the spray pattern is not dictated by a propellant.\u003c\/p\u003e\n\n\u003cp\u003ePressure drops as you spray, which is true of every hand pressure sprayer. When the jet softens, give it three or four strokes rather than carrying on. The other reason one pass at steady pressure beats two at falling pressure: with solvents it is contact time that does the work, and a broken-up jet flashes off before it reaches the dirt.\u003c\/p\u003e\n\n\u003cp\u003eSolvent-based products are generally not diluted. What goes into the tank hits the surface exactly as it came out of the canister. That makes the nozzle your real control: open the mist too far and you burn through twice the product on a single door without cleaning any better.\u003c\/p\u003e\n\n\u003cp\u003eThe 13.5 cm lance is part of the accessory range and earns its keep around wheel arches, behind callipers or under trim. You will find more units of the same build in our \u003ca href=\"\/collections\/druckpumpzerstaeuber\"\u003epressure sprayers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSolvents yes. Acids no.\u003c\/h3\u003e\n\n\u003cp\u003eGoizper lists solvents, oils and petroleum by-products as optimal for the HC, and alkalis and ketones as adequate. Acids appear in neither column, and that is no oversight.\u003c\/p\u003e\n\n\u003cp\u003eThis is exactly where two units that are otherwise hard to tell apart part ways. The iK HC and the iK Multi share the same tank, the same 2.5 bar valve and the same flow rate. The difference sits purely in the seals, and it decides whether your sprayer lasts a year or a season.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\u003cth\u003eUnit\u003c\/th\u003e\u003cth\u003eOptimal per manufacturer\u003c\/th\u003e\u003cth\u003eNot intended for\u003c\/th\u003e\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003ctd\u003e\"iK HC\" 1.5\u003c\/td\u003e\u003ctd\u003eSolvents, oils, petroleum products, solvent-based products\u003c\/td\u003e\u003ctd\u003eAcids, many halogenated solvents\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd\u003e\"iK Multi\" Pro 2\u003c\/td\u003e\u003ctd\u003eAcids, neutral products, disinfectants\u003c\/td\u003e\u003ctd\u003eSolvents and oils only to a limited degree\u003c\/td\u003e\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eIf you spray brake cleaner, tar remover or silicone remover, the HC is the right unit. If acidic wheel cleaners or iron removers are going in the tank, you grab the \u003ca href=\"\/products\/ik-sprayers-druckpumpzerstaeuber-ik-multi-pro-2\"\u003eacid-resistant pressure sprayer\u003c\/a\u003e. And if you mostly work alkaline, with pre-wash or APC, the \u003ca href=\"\/products\/ik-sprayers-ik-alk-15-druckpumpzerstaeuber-alkalisch\"\u003ealkali-resistant pressure sprayer\u003c\/a\u003e is the one you want.\u003c\/p\u003e\n\n\u003cp\u003eGoizper names two more limits outright. Many halogenated solvents are ruled out, meaning anything with chlorine or bromine in the molecule such as dichloromethane. And with brake cleaner the formula matters: pure hydrocarbon products are fine, versions carrying alcohol or acetone are not. Ten seconds reading the back of the canister saves the seal.\u003c\/p\u003e\n\n\u003cp\u003eOne more sober number: of 1.5 litres of tank volume, only 1 litre is usable. Work a whole fleet in one go and you will be refilling more often. What we see at Detailing1 again and again is people ordering the wrong model from the iK range, because the units look so alike. The number in the name is tank volume, not fill volume.\u003c\/p\u003e\n\n\u003ch3\u003eFor anyone buying canisters instead of aerosols\u003c\/h3\u003e\n\n\u003cp\u003eThe HC starts paying off the moment you buy brake cleaner or tar remover by the canister rather than the can. One litre of fill matches roughly two 500 ml aerosols, and you decide how much goes on.\u003c\/p\u003e\n\n\u003cp\u003eRun the numbers: after ten fills the purchase price works out at just under 2.90 EUR per litre of spray solution, and it keeps dropping with every fill after that. For detailers degreasing daily that is a matter of weeks. For the keen home detailer who pulls the wheels twice a year and does the arches it is more a matter of years, and the sprayer still wins on dosing control.\u003c\/p\u003e\n\n\u003cp\u003eThe HC makes less sense if you own a single solvent product and buy it ready-mixed in a spray bottle anyway. Then you are paying for flexibility you never use. And if you only work alkaline or only acidic, buy the unit built for that instead of pressing the HC into a job it was not made for.\u003c\/p\u003e\n\n\u003cp\u003eSame goes for the purely functional case: if twice a year a few bug splats and some brake dust need to go, the can off the shelf is plenty. The HC starts to add up where solvent becomes a working material rather than an emergency fix.\u003c\/p\u003e\n\n\u003cp\u003eThe technical summary: 1.5 litre tank, 1 litre fill, safety valve at 2.5 bar, about 0.7 l\/min, 0.46 kg empty. Store it frost-free between 5 and 30 °C and give the moving parts a drop of oil now and then. If you cover bigger areas in one go, the same range runs to 6 and 8 litres.\u003c\/p\u003e\n\n\u003cp\u003eOne thing no manufacturer prints on the packaging: label the sprayer the moment you fill it. We get asked all the time whether a particular product can go in the pump sprayer, and the honest answer nearly always depends on what was in there before.\u003c\/p\u003e\n\n\u003cp\u003eA unit that has seen silicone remover and then takes panel wipe without a rinse spreads residue across the very panel you are about to seal. The mistake only shows when the sealant dries patchy, and then the whole door is back on the list. One unit, one medium, label on it.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"1 Liter","offer_id":58397340172623,"sku":"D1-IKS-81774","price":28.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-druckpumpzerstaeuber-ik-hc-1-5_1-stueck.png?v=1786016354"},{"product_id":"ik-sprayers-druckpumpzerstaeuber-ik-inox-6","title":"\"iK INOX\" 6 Pressure Sprayer for Solvents (Stainless Steel)","description":"","brand":"iK Sprayers","offers":[{"title":"6 Liter","offer_id":58397374480719,"sku":"D1-IKS-83373","price":229.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-druckpumpzerstaeuber-ik-inox-6_1-stueck.png?v=1786016973"},{"product_id":"ik-sprays-druckpumpzerstauber-ik-inox-10","title":"\"iK INOX\" 10 Pressure Sprayer with Compressed-Air Valve for Solvents (Stainless Steel)","description":"\u003ch2 id=\"speakable-headline\"\u003eWith a solvent pressure sprayer the material decides how long it lasts\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the iK Sprayers \"iK INOX\" 10? A pressure sprayer with a stainless steel tank and a compressed-air connector as standard, built for hydrocarbon chemistry: cold cleaners, degreasers, tar removers, mineral and vegetable oils. Not suitable for acids, alkalis, acetone or sodium hypochlorite. Alcohols only to a limited extent.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eiK Sprayers \"iK INOX\" 10\u003c\/strong\u003e is a \u003cstrong\u003esolvent pressure sprayer\u003c\/strong\u003e from Goizper, with tank, lance and handle made from stainless steel. You build pressure with the hand pump or hook shop air to the connector in the lid; a safety valve caps it at 6 bar. Seals and materials are rated by the maker for mineral and vegetable oils, release agents, neutral cleaners and hydrocarbons.\u003c\/p\u003e\n\n\u003cp\u003eWhat separates it from a polyethylene sprayer is not the tank, it is the seals. A hydrocarbon-based cold cleaner makes the wrong seal swell — it goes soft, loses its tension and the sprayer stops holding pressure. You rarely spot that while filling. You spot it mid-job, when the mist collapses and the pump runs dry.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eCompressed-air connector as standard.\u003c\/strong\u003e On the 10-litre model the connector is included; on the 6-litre it is an extra. You fill once, hook up shop air and never touch the pump for the rest of the tank. The safety valve caps at 6 bar and pulls open to bleed off.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eCleared for hot media and high pressure.\u003c\/strong\u003e In the maker's materials table the stainless range is the only one that scores top marks on high pressure, hot chemicals up to 50 °C and weather resistance. The three plastic ranges sit at \"limited\" on all three.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eTen litres usable, thirteen litres of volume.\u003c\/strong\u003e That three-litre difference is not leftover headspace by accident — it is why pressure holds across a whole fill instead of dropping off after half a tank. At 6 bar the lance puts out 1.13 litres a minute, and one fill replaces ten fills of a 1-litre spray bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e What we see day-to-day is that these sprayers get killed by one alkaline cleaner run \"just this once\". Acetone, caustic soda, potassium hydroxide and sodium hypochlorite all sit on not suitable for the stainless range. A single pass is enough to attack the seals, and the damage only shows up weeks later as lost pressure.\u003c\/p\u003e\n  \u003cp\u003eThat is exactly why we keep getting questions about sprayers that \"suddenly\" stop holding. Keep one unit per chemical family and label it. And grease the moving parts of the pump every few weeks: the maker names that specifically as the way to extend seal life — it sits in the small print and almost nobody does it.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe air connector does the pumping for you\u003c\/h3\u003e\n\u003cp\u003eYou fill through the wide funnel in the lid, parking the unscrewed pump chamber in its own holder while you do. Then you decide where the pressure comes from.\u003c\/p\u003e\n\n\u003cp\u003eBy hand: the base has two brackets you put a foot on while you pull the chamber. Without something to hold it down the unit walks, with a foot on the bracket you pump against your own weight and watch the gauge to see where you are. On air: open the connector in the lid, click the coupling on, done — shop air does the work and you never touch the pump for the whole fill.\u003c\/p\u003e\n\n\u003cp\u003eTwo nozzles come in the box. The adjustable cone covers panels when you want to wet an engine bay or an underbody evenly. The fan in the elbow works tighter, on edges, seams and wheel arches. The stainless lance is 50 centimetres, the hose 1.8 metres — together that gets you down a whole side of a car from where the unit stands, without dragging it along.\u003c\/p\u003e\n\n\u003cp\u003eFor longer walks you sling it over your shoulder on the strap. Because you are atomising solvents here, the maker shows the job done with a respirator, goggles and gloves throughout — with cold cleaner in an engine bay that is not a formality, it is the difference between breathing the mist and not. Don't spray in a draught or in full heat, or more product drifts off than lands.\u003c\/p\u003e\n\n\u003cp\u003eThe handiest detail is the one no product photo shows: the lance holder on the head doubles as a grip when you tip the tank to empty it. Getting ten litres of leftovers out under control, without hugging a wet tank, is exactly why that bar sits there. More units of this type are in the \u003ca href=\"\/collections\/druckpumpzerstaeuber\"\u003epressure sprayers\u003c\/a\u003e category.\u003c\/p\u003e\n\n\u003ch3\u003eHydrocarbons yes. Acids and alkalis no.\u003c\/h3\u003e\n\u003cp\u003eThe stainless range is built for hydrocarbons and locked out of acids. The maker publishes that as a table, and it is clearer than any sales copy.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\u003cth\u003eGroup\u003c\/th\u003e\u003cth\u003eExamples\u003c\/th\u003e\u003cth\u003eiK INOX\u003c\/th\u003e\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003ctd\u003eAliphatic hydrocarbons\u003c\/td\u003e\u003ctd\u003eHeptane, hexane, pentane, decane\u003c\/td\u003e\u003ctd\u003eoptimal\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd\u003eAromatic hydrocarbons\u003c\/td\u003e\u003ctd\u003eXylene, limonene, toluene up to 40 %\u003c\/td\u003e\u003ctd\u003eoptimal\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd\u003eOils and petroleum products\u003c\/td\u003e\u003ctd\u003eMineral and vegetable oil, diesel, petrol, kerosene, white spirit\u003c\/td\u003e\u003ctd\u003eoptimal\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd\u003eMechanical load\u003c\/td\u003e\u003ctd\u003eHigh pressure, hot media up to 50 °C, weather\u003c\/td\u003e\u003ctd\u003eoptimal\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd\u003eAlcohols\u003c\/td\u003e\u003ctd\u003eEthanol, methanol, butanol\u003c\/td\u003e\u003ctd\u003elimited\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd\u003eAcids\u003c\/td\u003e\u003ctd\u003eAcetic, hydrochloric, phosphoric, nitric, sulphuric\u003c\/td\u003e\u003ctd\u003enot suitable\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd\u003eAlkalis and ketones\u003c\/td\u003e\u003ctd\u003eAcetone, caustic soda, potassium hydroxide, ammonia, sodium hypochlorite\u003c\/td\u003e\u003ctd\u003enot suitable\u003c\/td\u003e\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eIn practice that means cold cleaners, solvent-based degreasers, tar and adhesive removers, release agents and oils are the core ground. Isopropanol mixes fall under \"limited\" — they destroy nothing, but seal life is shorter than with pure hydrocarbons, so we would not tie up a 246-euro unit for that.\u003c\/p\u003e\n\n\u003cp\u003eThere are four hard limits. First every acid, no exceptions and no percentage threshold. Second acetone, alkalis and sodium hypochlorite. Third a lot of halogenated solvents, which the maker rules out across the board. And fourth thick media: the sprayer handles thin release agents, not heavy grease and not tacky underbody coating.\u003c\/p\u003e\n\n\u003cp\u003eGoizper also states plainly that given the spread of products on the market it guarantees no universal compatibility. When in doubt your chemical's data sheet decides, not the category — and if a chlorine or acid content shows up there, the product stays out.\u003c\/p\u003e\n\n\u003cp\u003eThat turns into a simple split. If your product is alkaline, so APC, wheel cleaner or pre-wash, it belongs in an \u003ca href=\"\/products\/ik-sprayers-ik-alk-15-druckpumpzerstaeuber-alkalisch\"\u003ealkali-resistant pressure sprayer\u003c\/a\u003e with EPDM seals. If it is acidic you want the Multi range. If it is hydrocarbon-based the INOX is right — and if you only need a litre of that now and then, the \u003ca href=\"\/products\/ik-sprayers-druckpumpzerstaeuber-ik-hc-1-5\"\u003e1-litre pressure sprayer\u003c\/a\u003e carries the same chemical clearance.\u003c\/p\u003e\n\n\u003ch3\u003eTen litres pay off once you work by the panel\u003c\/h3\u003e\n\u003cp\u003eThe iK INOX 10 pays for itself when you wet surfaces regularly: engine bays, underbodies, suspension, wheel arches, shop floors. From that volume on, the tank buys back time.\u003c\/p\u003e\n\n\u003cp\u003eA litre lasts a few minutes on surface work. Do an underbody from a 1-litre bottle and you spend half the job refilling and re-pumping — at ten litres with shop air both disappear. On top of that comes the clearance for media up to 50 °C: degreasers mixed warm cut faster, and the plastic ranges are only cleared for that to a limited degree.\u003c\/p\u003e\n\n\u003cp\u003eJust as honestly the other way round: if you spray half a litre of brake cleaner twice a year, you do not need this. A solvent-resistant solvent pressure sprayer in bottle format costs a fraction and does exactly the same at that volume. The premium buys tank capacity, stainless steel, a gauge and shop air — not better atomisation on a one-litre job.\u003c\/p\u003e\n\n\u003cp\u003eAgainst the 6-litre stainless model the maths is sober too. It handles the same chemistry and carries the same clearances. The compressed-air connector there is an extra though, while here it is standard. If you have shop air on the wall you effectively get the connector thrown in with the 10-litre — if you don't, the smaller unit saves you real money.\u003c\/p\u003e\n\n\u003cp\u003eThe tip that decides how long it lives is not on the box, it is in the maintenance notes: grease the moving parts of the pump regularly. The maker names that specifically as the way to extend seal life — and it is the step almost nobody takes between two jobs.\u003c\/p\u003e\n\n\u003cp\u003eTogether with two minutes of rinsing and bleeding the pressure before you put it away, that is the difference between a unit that lasts three seasons and one that weeps after a winter on a cold shelf. Blocked nozzles get flushed with water, never with wire or a needle — a widened orifice atomises worse forever. Store it frost-free between 5 and 30 °C.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"10 Liter","offer_id":58397437919567,"sku":"D1-IKS-83374","price":245.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-druckpumpzerstaeuber-ik-inox-10_1-stueck.png?v=1786017104"},{"product_id":"koch-chemie-pressure-sprayer-alkaline-drucksprueher-alkalisch","title":"Pressure Sprayer \"Alkaline\" Alkaline pump sprayer","description":"","brand":"Koch-Chemie","offers":[{"title":"1.5 litres","offer_id":58702916026703,"sku":"D1-KCX-9998284","price":52.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-pressure-sprayer-alkaline-drucksprueher-alkalisch.png?v=1788816570"},{"product_id":"koch-chemie-pressure-sprayer-acid-drucksprueher","title":"Pressure Sprayer \"Acid\" Acid pump sprayer","description":"","brand":"Koch-Chemie","offers":[{"title":"1.5 litres","offer_id":58702917501263,"sku":"D1-KCX-9998285","price":52.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-pressure-sprayer-acid-drucksprueher.png?v=1788816574"},{"product_id":"koch-chemie-pro-pressure-sprayer-alkaline-drucksprueher-alkalisch","title":"Pro Pressure Sprayer \"Alkaline\" Alkaline pump sprayer","description":"","brand":"Koch-Chemie","offers":[{"title":"6 litres","offer_id":58702918877519,"sku":"D1-KCX-9998286","price":117.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-pro-pressure-sprayer-alkaline-drucksprueher-alkalisch.png?v=1788816574"},{"product_id":"koch-chemie-pro-pressure-sprayer-acid-drucksprueher","title":"Pro Pressure Sprayer \"Acid\" Acid pump sprayer","description":"","brand":"Koch-Chemie","offers":[{"title":"6 litres","offer_id":58702919696719,"sku":"D1-KCX-9998287","price":117.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-pro-pressure-sprayer-acid-drucksprueher.png?v=1788816574"}],"url":"https:\/\/detiiling1.com\/collections\/druckpumpzerstaeuber.oembed","provider":"Detailing1","version":"1.0","type":"link"}