{"title":"GYEON Spray Sealants","description":"\u003ch2\u003eEasy Paint Protection After Washing with GYEON Q²M Spray Sealants\u003c\/h2\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cem\u003eWhat are GYEON Q²M Spray Sealants? GYEON Q²M Spray Sealants are quick-to-apply paint protection products that are sprayed onto a wet or dry car body – for an instant hydrophobicity boost and short-term paint protection without elaborate application or waiting time.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eGYEON Q²M Spray Sealants\u003c\/strong\u003e are the fastest way to give a vehicle an additional layer of protection and hydrophobicity after washing. Unlike ceramic coatings or hard sealants, a spray sealant is simply sprayed onto the wet car body after rinsing and worked in while drying or with a microfiber towel. The result: an instant hydrophobicity boost, better beading behavior during the next wash, and a fresh shine – in under 5 minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant protection without waiting time.\u003c\/strong\u003e Spray sealants work immediately after application – no flash-off, no waiting, no minimum curing time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable to wet and dry surfaces.\u003c\/strong\u003e Depending on the product, the spray sealant can be applied to the still wet car body directly after rinsing or to a dry surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating-compatible for coated vehicles.\u003c\/strong\u003e GYEON Q²M Spray Sealants are formulated not to attack existing ceramic coatings, but to act as a topper protective layer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Q²M Cure on the still wet car body is most effective: rinse the vehicle, spray the spray sealant on all surfaces (roof, hood, sides), then wipe and dry with a drying towel. This way, the sealant optimally bonds with the still open, moist paint surface.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eGYEON Q²M Cure: The Standard Spray Sealant for Coated Vehicles\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe GYEON Q²M Cure\u003c\/strong\u003e is the central spray sealant product in the Q²M line and is specially developed as a maintenance product for coated vehicles. It is sprayed onto the wet surface after each wash and evenly distributed when wiping with a drying towel. The product actively refreshes the hydrophobicity of the ceramic coating and gives the paint additional protection against environmental contaminants. In combination with the \u003ca href=\"\/collections\/gyeon-q2m-maintenance-quick-detailer\"\u003eQ²M Detailer\u003c\/a\u003e for interim care and the \u003ca href=\"\/collections\/gyeon-q2m-maintenance-shampoo\"\u003eQ²M Shampoo\u003c\/a\u003e, a complete maintenance workflow for coated vehicles is created.\u003c\/p\u003e\n\u003ch3\u003eBuy GYEON Spray Sealants at Detailing1\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAt Detailing1,\u003c\/strong\u003e you will find GYEON Q²M Spray Sealants and Coating Boosters as part of the complete \u003ca href=\"\/collections\/gyeon-q2m-maintenance\"\u003eQ²M Maintenance range\u003c\/a\u003e – for easy, quick paint protection after every wash.\u003c\/p\u003e","products":[{"product_id":"gyeon-q2m-wetcoat-nassversiegelung","title":"Q²M WetCoat Wet Sealant","description":"\u003ch2\u003eSealing straight off the wash – GYEON Q²M WetCoat as a wet sealant\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eWhat is a wet sealant, and what makes GYEON Q²M WetCoat so special?\u003c\/strong\u003e\u003cbr\u003e\nA wet sealant goes straight onto wet paint – no drying, no buffing, no waiting around. GYEON Q²M WetCoat carries SiO₂ particles that settle onto the paint as you rinse and lay down a thin, hydrophobic protective film. The result: water beads off right away, the paint pops, and the layer holds for several weeks. For a SiO₂ sealant after the wash in under two minutes, WetCoat is one of the most efficient options in detailing.\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eNot every sealant needs hours of polishing and curing. GYEON Q²M WetCoat proves the opposite: after the wash you spray it onto wet paint, give it a quick rinse, and you're done – a SiO₂ protective layer that makes water bead, lifts the gloss and holds for several weeks. No buffing off, no timer to watch, no fiddly application. WetCoat is the wet-sealant pick for anyone who wants maximum protection with minimal effort – and no compromise on the result.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoes straight onto wet paint:\u003c\/strong\u003e you spray WetCoat on after the final rinse – trapping the product in the water film spreads it evenly and grips well, with no manual application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiO₂ protection in minutes:\u003c\/strong\u003e the SiO₂ particles settle onto the paint as you rinse and form a hydrophobic layer right away – you'll see the beading and the gloss the moment it dries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds for several weeks:\u003c\/strong\u003e quick as it is, WetCoat holds 4 to 8 weeks under normal conditions – well beyond what a fast detailer spray gives you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote\u003e\n\u003cstrong\u003eDaniel's tip from the shop:\u003c\/strong\u003e get the most out of WetCoat on the final rinse – spray it onto the wet paint, let it sit for 20–30 seconds, then rinse it off with low pressure and plenty of water – don't wipe it. The even rinse spreads the SiO₂ particles nicely across the whole panel. Then dry with a clean microfibre or an air blower – you'll see the result straight away.\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eHow WetCoat works\u003c\/h3\u003e\n\u003cp\u003eThe chemistry behind WetCoat is elegant: SiO₂ nanoparticles suspended in a water-based carrier. Spray the product onto wet paint, then rinse it off with plenty of water, and the nanoparticles leave a thin, even layer on the surface. That layer is hydrophobic – water beads up and runs off instead of spreading out and leaving water spots behind.\u003c\/p\u003e\n\u003cp\u003eThe key to it all is the rinse: too little water and you get streaks and spots, too much and you wash off too much product. The sweet spot – an even rinse with a wide, low-pressure stream – gives the SiO₂ particles the chance to spread out properly across the surface.\u003c\/p\u003e\n\n\u003ch3\u003eWetCoat as part of your regular wash routine\u003c\/h3\u003e\n\u003cp\u003eWhat's clever about WetCoat is that it slots straight into your wash routine without dragging it out. After a regular wash – whether with \u003ca href=\"\/products\/gyoen-q2m-restartwash-dekontaminations-shampoo\"\u003eGYEON Q²M RestartWash\u003c\/a\u003e or a standard shampoo – you put WetCoat on at the final rinse. Total time for the seal: 1 to 2 minutes. That makes WetCoat the perfect maintenance product for cars already protected with a long-term coating – a regular top-up after every wash.\u003c\/p\u003e\n\u003cp\u003eBut even on cars without a base coating, WetCoat delivers solid protection on its own: better than no protection, far quicker than any other sealing product, and with a visible effect that wins you over straight away. For customers who don't want a full coating job but want more than nothing, WetCoat is the ideal call.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with existing coatings\u003c\/h3\u003e\n\u003cp\u003eWetCoat plays nicely with all the usual coatings and sealants – it works as a top layer and freshens up the hydrophobic behaviour of the base sealant without damaging or changing it. On a cured SiO₂ coating, WetCoat boosts the hydrophobics and noticeably extends how long the base seal performs.\u003c\/p\u003e\n\u003cp\u003eFor cars sealed with a GYEON Q² Coat or similar ceramic coating, WetCoat is a great fit as regular maintenance after every wash. The SiO₂ particles in WetCoat fill the micro-gaps in the coating surface and give the paint a fresh, water-shedding effect after every wash.\u003c\/p\u003e\n\n\u003ch3\u003eThe result: more than you'd expect from a wet sealant\u003c\/h3\u003e\n\u003cp\u003eWhat sets WetCoat apart from other fast sealing products is the effort-to-result ratio: under two minutes of extra work after the wash, but a result you measure in weeks. The gloss shows up right away, the hydrophobics make themselves known at the next rain, and the surface is far easier to keep clean.\u003c\/p\u003e\n\u003cp\u003eFor cars that get washed regularly – weekly or every other week – WetCoat is the missing piece for lasting, well-kept paint. Paired with \u003ca href=\"\/products\/gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs\"\u003eGYEON Q²M QuickDetailer\u003c\/a\u003e for quick touch-ups in between and \u003ca href=\"\/products\/gyeon-q2m-restartwash-dekontaminations-shampoo\"\u003eGYEON Q²M RestartWash\u003c\/a\u003e for the decontamination wash, WetCoat rounds out a complete, everyday care system for the demanding car owner.\u003c\/p\u003e\n\n\u003ch3\u003eWetCoat for pros and DIY\u003c\/h3\u003e\n\u003cp\u003eIn professional detailing, WetCoat works as a handover finish: after the full prep and the dry-down, you put WetCoat on during the final rinse phase – the customer gets a car that's freshly washed and freshly sealed at once. For the DIY crowd, WetCoat is the easiest way to actively put work into your paint after every wash, with no expert know-how or complex kit.\u003c\/p\u003e\n\u003cp\u003eFor a lot of people the way into the GYEON range starts with WetCoat – and it shows straight away what quality detailing chemistry can do. If you want to take the next step, \u003ca href=\"\/products\/gyeon-q2m-preserve-kunststoffpflege\"\u003eGYEON Q²M Preserve\u003c\/a\u003e for plastics and GYEON Q²M TireExpress for tyres are natural add-ons that round out the whole picture.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57034644062543,"sku":"D1-GYEON-Q2MWC1000","price":27.0,"currency_code":"EUR","in_stock":true},{"title":"500ml","offer_id":57034644095311,"sku":"D1-GYEON-Q2MWC500","price":17.0,"currency_code":"EUR","in_stock":true},{"title":"4 liters","offer_id":57034644128079,"sku":"D1-GYEON-Q2MWC4000","price":78.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-wetcoat-nassversiegelung.png?v=1771144774"},{"product_id":"gyeon-q2m-cure-redefined-keramik-spruehversiegelung","title":"Q²M Cure (REDEFINED) Ceramic Spray Sealant","description":"\u003ch2\u003eKeep your coating fresh long-term – GYEON Q²M Cure\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Cure? GYEON Q²M Cure is a SiO₂-based ceramic spray sealant that regularly tops up existing coatings and sealants, reactivates the hydrophobicity and builds an extra layer of protection – for maximum durability on any coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eCeramic coatings last – but they get a huge amount out of regular care. \u003cstrong\u003eGYEON Q²M Cure\u003c\/strong\u003e is the go-to top-up for every GYEON Q² coating: a highly concentrated SiO₂ spray sealant that bonds chemically with the coating surface, reactivates the hydrophobicity and lays down a fresh layer of protection at the same time. The result: coatings last longer, bead harder and look better across their whole lifespan.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReactivates hydrophobicity on ceramic coatings instantly and for the long haul.\u003c\/strong\u003e Over time the hydrophobicity of ceramic coatings drops off – through washing, the elements and UV. Q²M Cure turns that around: once it's on, water beads as sharply as it did on a freshly applied coating. The reactivation lasts noticeably longer than with a plain quick detailer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilds a SiO₂ protective layer of its own on top of the coating surface.\u003c\/strong\u003e Q²M Cure isn't just a care product – it carries enough SiO₂ to form a layer of its own on top of the existing coating. That layer protects the base coating from breaking down and stretches its overall lifespan considerably.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks just as well as a standalone sealant with no base coating.\u003c\/strong\u003e Q²M Cure is strong enough to use on unsealed paint too – as a stand-alone sealant with solid beading and several months of durability. Ideal for cars that aren't getting a permanent ceramic coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Lay Q²M Cure down on dry paint after the wash. Spread it evenly on a clean microfibre or applicator, let it sit for a moment (about 60–90 seconds), then buff it off with a second, clean microfibre. For cars running \u003ca href=\"\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e or other Q² coatings we'd top up with Q²M Cure every 2–3 months – that keeps the full protection going across the coating's whole life.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe science behind Q²M Cure: how SiO₂ builds coatings\u003c\/h3\u003e\n\u003cp\u003eQ²M Cure carries a higher SiO₂ concentration than your typical quick detailer or wash-and-wax shampoo. That concentration is high enough to form a chemical bond with the coating surface and build a layer of its own, thinner though it is. As it cures (at room temperature within 30–60 minutes) the SiO₂ cross-links with the existing coating – the surface gets harder, more hydrophobic and takes on a different surface energy that cuts down dirt pickup even further.\u003c\/p\u003e\n\n\u003ch3\u003eUsing Q²M Cure: as a post-wash and standalone\u003c\/h3\u003e\n\u003cp\u003eAs a post-wash sealant: after washing with \u003ca href=\"\/products\/gyeon-q2m-bathe-autoshampoo\"\u003eQ²M Bathe\u003c\/a\u003e or \u003ca href=\"\/products\/gyeon-q2m-bathe-plus-autoshampoo-keramikeffekt\"\u003eQ²M Bathe+\u003c\/a\u003e, dry the car off and lay Q²M Cure down on the paint. Spread it with an applicator, wait a moment, then buff off. As a standalone between washes: on a clean car, spray one panel at a time, spread, wait and buff off. How often: every 2–3 months on coated cars, every 4–8 weeks on uncoated cars to keep the beading going.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Cure Matte: the version for matte paint\u003c\/h3\u003e\n\u003cp\u003eWith \u003ca href=\"\/products\/gyeon-q2m-cure-matte-redefined-keramik-spruehversiegelung-ma\"\u003eQ²M Cure Matte\u003c\/a\u003e GYEON offers a dedicated version for matte paint and wraps. The difference: Q²M Cure (standard) lifts the gloss – which is what you want on glossy paint, but it kills the matte effect on matte paint. Q²M Cure Matte is formulated to keep the surface matte while still delivering hydrophobicity and protection. Always use Q²M Cure standard on glossy paint, Q²M Cure Matte on matte surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Cure in the care programme of different Q² coatings\u003c\/h3\u003e\n\u003cp\u003eQ²M Cure is the official top-up product for the whole GYEON Q² coating line. Recommended care intervals by coating: \u003ca href=\"\/products\/gyeon-q2-cancoat-evo-ceramic-coating-keramik-spruehversiegel\"\u003eQ² CanCoat EVO\u003c\/a\u003e (entry-level coating) every 4–6 weeks, \u003ca href=\"\/products\/gyeon-q2-one-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² One EVO\u003c\/a\u003e every 2–3 months, \u003ca href=\"\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e every 2–4 months. Topping up with Cure regularly demonstrably extends the coating's life and keeps performance high across the whole warranty period.\u003c\/p\u003e\n\n\u003ch3\u003eWorth buying: Q²M Cure for every GYEON coating owner\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Cure is a care must for every car with a GYEON coating. As an easy, fast and effective top-up every 2–3 months, Q²M Cure protects your coating investment and makes sure the car keeps showing the maximum lotus effect and gloss for good. For the daily top-up between Cure applications we'd go with \u003ca href=\"\/products\/gyeon-q2m-ceramic-detailer-keramik-quick-detailer\"\u003eQ²M CeramicDetailer\u003c\/a\u003e, and for the wet sealant straight after the wash the \u003ca href=\"\/products\/gyeon-q2m-wetcoat-nassversiegelung\"\u003eQ²M WetCoat\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"500ml","offer_id":57034673815887,"sku":"D1-GYEON-Q2MCURE500","price":36.0,"currency_code":"EUR","in_stock":true},{"title":"250ml","offer_id":57034673783119,"sku":"D1-GYEON-Q2MCURE250","price":24.0,"currency_code":"EUR","in_stock":false},{"title":"100ml","offer_id":57034673848655,"sku":"D1-GYEON-Q2MCURE100","price":15.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung.png?v=1771146140"},{"product_id":"gyeon-q2m-cure-matte-redefined-keramik-spruehversiegelung-matt-oberflaechen","title":"Q²M Cure Matte (REDEFINED) Ceramic Spray Sealant for Matte Surfaces","description":"\u003ch2\u003eProtect matte paint without killing the matte look – GYEON Q²M Cure Matte\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Cure Matte? GYEON Q²M Cure Matte is an SiO₂ ceramic spray sealant made specifically for matte paint and matte wraps – it gives you the same protection and hydrophobic kick as Q²M Cure, but without touching the surface's signature matte appearance.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eMatte paint is more demanding than high-gloss – and far less forgiving if you reach for the wrong product. A standard car shampoo or quick detailer can kill the matte effect and leave unwanted shiny patches. \u003cstrong\u003eGYEON Q²M Cure Matte\u003c\/strong\u003e is the answer: a full-blown ceramic spray sealant you can use on matte paint and matte wraps without changing that signature flat finish – while still laying down full SiO₂ protection and a strong hydrophobic effect.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKeeps the matte look fully intact – no unwanted gloss.\u003c\/strong\u003e Q²M Cure Matte is formulated so it never bumps up the gloss level. Matte paint stays matte, matte wraps keep their signature texture – the protection goes on with zero change to the look.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrong hydrophobic effect on matte surfaces too.\u003c\/strong\u003e Water protection and dirt repellency matter just as much on matte paint as on high-gloss – maybe even more, since matte surfaces are trickier to deal with once you've got hard water spots or dried-on grime. Q²M Cure Matte delivers active hydrophobic protection with no change to the finish.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSiO₂ protective layer shields against UV fade and contamination.\u003c\/strong\u003e Just like the high-gloss version, Q²M Cure Matte builds its own SiO₂ protective layer on the surface. That shields matte paint from UV, contamination and chemical attack – the usual culprits behind matte paint ageing before its time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Never use normal gloss detailers, quick detailers or waxes on matte paint – they kill the matte effect for good and getting them off again is a nightmare. Q²M Cure Matte is the safe call for every care step on matte surfaces. To wash a matte-paint car we recommend a pH-neutral shampoo with no wax content, and once it's dry, Q²M Cure Matte to top up the sealant.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMatte paint care: why you need products made for the job\u003c\/h3\u003e\n\u003cp\u003eMatte paint and matte wraps are built fundamentally differently from high-gloss surfaces: the matte look comes from a micro-structured, rough surface that scatters light instead of reflecting it. Normal products packed with waxes, silicones or gloss enhancers fill that micro-structure and smooth the surface out – which kills the matte effect and leaves shiny patches. Q²M Cure Matte lays down as a thin, even SiO₂ layer over that micro-structure without changing it – so the matte look stays fully intact.\u003c\/p\u003e\n\n\u003ch3\u003eHow to apply Q²M Cure Matte on matte paint and matte wraps\u003c\/h3\u003e\n\u003cp\u003eWash and dry the car thoroughly first. Lay Q²M Cure Matte down evenly on the matte surface with a soft microfibre or applicator (not a polishing cloth!). Important: no circular motions – straight, parallel passes for an even spread. After 60–90 seconds of dwell time, buff it off with a fresh, soft microfibre – no pressure, no polishing. Never apply in direct sun or on hot surfaces. Reapply every 4–8 weeks for steady protection.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Cure Matte on different matte surfaces\u003c\/h3\u003e\n\u003cp\u003eQ²M Cure Matte suits every kind of matte surface: factory matte paint (e.g. BMW Individual Matt, Porsche Chalk), matte wraps (satin or matte wrap films), matte paint coatings (like \u003ca href=\"\/products\/gyeon-q2-matte-evo-paint-coating-keramikversiegelung-matt-la\"\u003eQ² Matte EVO\u003c\/a\u003e) and satin finishes. On cars with both matte and gloss sections: use Q²M Cure Matte on the matte areas, and the regular \u003ca href=\"\/products\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e on the high-gloss parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to do if shiny patches have appeared on matte paint\u003c\/h3\u003e\n\u003cp\u003eIf the wrong products have left shiny patches on matte paint, you're in a tough spot – but not a hopeless one. On coated matte paint (\u003ca href=\"\/products\/gyeon-q2-matte-evo-paint-coating-keramikversiegelung-matt-la\"\u003eQ² Matte EVO\u003c\/a\u003e): strip the coating layer evenly with a suitable coating remover (\u003ca href=\"\/products\/gyeon-q2m-total-remover-wachs-coating-entferner\"\u003eQ²M TotalRemover\u003c\/a\u003e) and re-coat. On uncoated matte paint: a detailer should assess the surface – in some cases careful cleaning can clear the shiny patches, in others a respray is the only fix. Q²M Cure Matte reliably stops problems like this before they start.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: Q²M Cure Matte for matte-paint cars\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Cure Matte is a must-have for anyone running a car with matte paint or a matte wrap. The fallout from the wrong care (a ruined matte effect, shiny patches) is expensive and often beyond repair – Q²M Cure Matte takes that risk off the table. As a complete matte paint care system we recommend: a pH-neutral, wax-free shampoo for washing, Q²M Cure Matte to top up the sealant, and \u003ca href=\"\/products\/gyeon-q2-matte-evo-paint-coating-keramikversiegelung-matt-la\"\u003eQ² Matte EVO\u003c\/a\u003e as a long-term ceramic coating for matte paint.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"500ml","offer_id":57034703307087,"sku":"D1-GYEON-Q2MCUREMATTE500","price":37.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-cure-matte-redefined-keramik-spruehversiegelung-matt-oberflaechen.png?v=1771146769"},{"product_id":"gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie","title":"Q²M \"PPF\" Maintain (REDEFINED) Spray Sealant for Paint Protection Film","description":"\u003ch2 id=\"speakable-headline\"\u003eSiO² hydrophobicity for paint protection film with GYEON Q²M PPF Maintain\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Q²M PPF Maintain? A SiO²-based spray sealant for PU and TPU paint protection films that refreshes hydrophobicity and self-cleaning after every wash to a contact angle above 80° — on matte and gloss film alike. Not for unwrapped clear coat or film edges that have already lifted.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_hero.jpg\" alt=\"GYEON Q²M PPF Maintain spray sealant next to a wrapped vehicle in the shop\" loading=\"lazy\"\u003e\n\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eGYEON Q²M PPF Maintain\u003c\/strong\u003e is a spray sealant from GYEON's REDEFINED line, formulated for polyurethane and thermoplastic polyurethane films. The SiO² content above 5 percent builds a silicate layer on the film that keeps the contact angle above 80° and stops organic grime from gripping. The pH range between 4 and 9 makes the sealant compatible with common coatings — unlike quick detailers for paint, which carry solvents or silicone oils that can attack the plasticisers in the film material.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContact angle above 80° after every pass.\u003c\/strong\u003e The SiO² content lays down a thin silicate layer on the film after two or three sprays. Water beads like fresh PPF, dust and road grime grip less, the self-cleaning comes back. You see the effect straight away in the bead shape the next time water hits the panel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLayering effect with regular use.\u003c\/strong\u003e A single refresh holds for over six weeks. Top it up after every wash and you build cumulative layers after two or three rounds — the standing time per application climbs, your consumption drops. That's the difference between care and a one-off.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30 ml per vehicle — 500 ml covers around 16 applications.\u003c\/strong\u003e Fine mist, lay it down thin, work it out with two cloths. No dwell time, no settling, no aromatic solvents. One bottle rides along with you for roughly six to twelve months through your regular wash rhythm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Don't spray the sealant straight onto the panel — hit the microfibre cloth instead. The product spreads more evenly, nothing lands on rubber, plastic or window seals, and you burn through less per round. Wash the cloths separately after use at 40 °C with no fabric softener — silicate residue gums up the fibres and kills the absorbency. After about 20 washes a cloth comes out of rotation. On dark film a fresh finisher cloth really pays off, because streaks show up there first under raking light.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFine mist. Two cloths. No overspray.\u003c\/h3\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_anwendung.jpg\" alt=\"GYEON Q²M PPF Maintain being sprayed onto a microfibre cloth before application to paint protection film\" loading=\"lazy\"\u003e\n\n\n\u003cp\u003eTwo or three sprays per panel are plenty — spray onto the cloth, spread the product across the film, then buff with a second clean microfibre cloth (350–400 GSM). No dwell time needed, the sealant bonds right away.\u003c\/p\u003e\n\n\u003cp\u003eYou can work the sealant wet or dry. Wet means: spray straight onto the damp film after rinsing, pick it up with the drying towel — water gets pushed off, streaks go away, hydrophobicity is live on the spot. This route saves a step and suits a quick top-up in between. Dry means: dry the car off fully, then spray and work it out in two cloth passes. The dry method gives you more control over big panels and is the clean call on dark film.\u003c\/p\u003e\n\n\u003cp\u003eTemperature decides the result. Keep the film under 30 °C and don't work in direct sun — otherwise the carrier flashes off too fast and leaves specks that only a re-application after cleaning will shift. If you can't hold your hand on the film for a few seconds, it's too hot. Move the car into the shade, wait 15 minutes, then get going.\u003c\/p\u003e\n\n\u003cp\u003eWorks on gloss and matte PPF alike — the matte character stays put, no extra gloss layer forms. On textured films like carbon, spray thinner and buff harder so no residue sits in the grooves. Keep it off rubber, plastic and window seals — wipe overspray there off dry, because the SiO² layer on porous rubber seals leaves edges that only come off mechanically.\u003c\/p\u003e\n\n\u003ch3\u003eIt cares for the film. Not the clear coat.\u003c\/h3\u003e\n\u003cp\u003eThe sealant is chemically tuned to polyurethane, not to clear coat. On unwrapped paint the PPF formula brings no upside, because the SiO² layer doesn't bond to paint as well as it does to the film surface.\u003c\/p\u003e\n\n\u003cp\u003eFor clear coat, \u003ca href=\"\/products\/gyeon-q2m-cure-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e is the matched choice — its SiO² content and carriers are set so they grip reliably on the harder paint surface. On hybrid vehicles with partly wrapped sections (front in PPF, rear in factory paint) you either go two bottles, two cloths, clean separation — or, more common day-to-day: Q²M Cure across all panels, because it works passably on PPF too. The other way round, no.\u003c\/p\u003e\n\n\u003cp\u003eThe spray sealant is compatible with ceramic coatings already laid down on the film. If the PPF carries a coating like \u003ca href=\"\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e or Q² MOHS, the Maintain layer slots into the same matrix and acts as a topcoat. The coating underneath gets mechanical protection, the surface tension climbs on top. You feel the difference at drying — a freshly refreshed panel dries faster and without water runoff marks.\u003c\/p\u003e\n\n\u003cp\u003eWhere Maintain isn't the right product: on film with visible blisters, lifted edges or delamination. No sealant helps there — that film belongs in the hands of the PPF installer. Light swirls in the film surface won't get pulled out by the sealant either; the glossier surface makes them stand out more. Care then has \u003ca href=\"\/products\/gyeon-q2m-ppf-renew-politur-lackschutzfolie\"\u003eQ²M PPF Renew\u003c\/a\u003e as a polishing step before it.\u003c\/p\u003e\n\n\u003ch3\u003eYour standard after every PPF wash\u003c\/h3\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_ergebnis.jpg\" alt=\"Water beading in clean droplets off paint protection film after a GYEON Q²M PPF Maintain refresh\" loading=\"lazy\"\u003e\n\n\n\u003cp\u003eThe sealant is the right call for anyone who runs PPF regularly and doesn't want to watch the hydrophobicity collapse after twelve months. The rhythm is simple: refresh after every wash — and the car stays in showroom condition for good.\u003c\/p\u003e\n\n\u003cp\u003eAs a complete solution it slots into a three-stage system: \u003ca href=\"\/products\/gyeon-q2m-ppf-wash-autoshampoo-lackschutzfolie\"\u003eQ²M PPF Wash\u003c\/a\u003e as a pH-neutral shampoo with no gloss booster, so it doesn't attack the Maintain layer. Q² PPF EVO as a two-year coating for the base. And Maintain as the regular refresh after every wash. These three stages stretch a film's lifespan well past the manufacturer's warranty. If you've sunk four or five figures into PPF, this protects the investment — not the paint underneath.\u003c\/p\u003e\n\n\u003cp\u003eWhere the sealant fits less well is on vehicles that only move every six months. There a pure coating solution like Q² PPF EVO does the job without regular refreshing, because the wash-\u0026amp;-maintain routine then doesn't rack up enough applications per year to cash in on the layering edge. For pro detailers with PPF fleets in daily use there's also the 4-litre refill version on request — consumption stays the same, the price per millilitre drops noticeably.\u003c\/p\u003e\n\n\u003cp\u003eRun the numbers: a 500 ml bottle covers around 16 applications at 30 ml per vehicle. Refresh weekly and one bottle lasts about four months. Work every two weeks and it holds half to three-quarters of a year. That makes Maintain the cheapest part of the overall PPF protection — the film itself runs four to five figures, the coating three, the refresh under two euros per application.\u003c\/p\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_closeup.jpg\" alt=\"Close-up of the GYEON Q²M PPF Maintain spray bottle on microfibre cloths in the Detailing1 shop\" loading=\"lazy\"\u003e\n","brand":"GYEON","offers":[{"title":"500ml","offer_id":57046071279951,"sku":"D1-GYEON-Q2MPPFMAIN500","price":34.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_500ml.png?v=1771255602"}],"url":"https:\/\/detiiling1.com\/collections\/gyeon-q2m-maintenance-spruehversiegelungen.oembed","provider":"Detailing1","version":"1.0","type":"link"}