{"title":"PROFILINE Universal Cleaner — SONAX","description":null,"products":[{"product_id":"sonax-profiline-multistar-all-purpose-cleaner-universalreiniger","title":"PROFILINE MultiStar \"All-Purpose-Cleaner\" Universal Cleaner","description":"\u003ch2\u003eOne concentrate for every cleaning job — SONAX PROFILINE MultiStar\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does the SONAX PROFILINE MultiStar do? This versatile all-purpose cleaner concentrate cuts through grease, oils, flash rust and general grime on vehicle surfaces inside and out — at a dilution you set yourself for different cleaning strengths, and in bulk containers up to 200 litres for cost-effective pro use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn detailing businesses, wash bays and fleet care centres, the need for a reliable, cost-effective all-purpose cleaner is constant and high. Separate products for the interior, exterior paint, engine bay, wheels and machinery mean more stock to hold, frequent reorders and needless complexity. The \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is the universal concentrate cleaner for all of these jobs: an alkaline cleaning formula that, across different dilution levels, handles most cleaning tasks in the vehicle and workplace — and thanks to container sizes from 1 litre to 200 litres it scales economically to any operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversally usable thanks to a variable dilution system.\u003c\/strong\u003e The MultiStar ships as a concentrate and you dilute it with water before use — the dilution rate sets the cleaning strength: low dilution (1:5 to 1:10) for heavy grime like engine oil, bitumen residue and stubborn dirt; medium dilution (1:20 to 1:50) for general vehicle cleaning; high dilution (1:50 to 1:100) for more sensitive areas such as interior plastics or lighter soiling. One concentrate, lots of uses.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlkaline formula reliably breaks down organic contaminants.\u003c\/strong\u003e The MultiStar's alkaline surfactant formula is tuned to dissolve organic grime: grease, oils, brake dust, tyre rubber and general vehicle dirt are loosened and made water-soluble by the combination of an alkaline pH and active surfactants. The formula plays nicely with most common vehicle surfaces — paint, plastic, rubber, metal and textile all respond well to the cleaner when you dilute it properly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBulk containers up to 200 litres for cost-effective pro use.\u003c\/strong\u003e Container sizes run from 1 litre for small businesses and occasional users up to 200-litre drums for large operations and wash bays. The price per litre drops sharply as the container gets bigger, which makes the MultiStar especially appealing for businesses burning through large amounts of cleaner every day. The concentrate approach also cuts transport weight and storage space considerably compared with ready-to-use cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e For effective use we'd keep the MultiStar ready in labelled spray bottles at different dilutions — e.g. 1:10 for engine bay and wheels, 1:30 for general exterior cleaning, 1:50 for the interior. That way the right strength is always within reach without mixing fresh every time. Don't use it on paint in direct sun or on a very hot surface — alkaline cleaners drying off fast can leave streaks. For acid-resistant grime (limescale, mineral deposits) the \u003ca href=\"\/products\/sonax-profiline-multiclean-acid-kraftreiniger-sauer\"\u003eSONAX PROFILINE MultiClean Acid\u003c\/a\u003e is the better call, since alkaline cleaners can't drive the acidic dissolving reactions. Always rinse thoroughly to pull off any cleaner residue — especially on paint and rubber.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eConcentrate technology — why dilution is what makes the MultiStar so flexible\u003c\/h3\u003e\n\u003cp\u003eThe concentrate approach of the \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e brings a decisive economic and logistical edge over ready-to-use cleaners: the cleaning agents (surfactants, alkalis, builders) ship in highly concentrated form and only get diluted with water at the point of use. That means a 1-litre concentrate container holds the cleaning power for 50–100 litres of ready-to-use cleaner — a 1-litre tub of concentrate cleans as much as a 50-litre tub of ready-to-use cleaner, but carries only a fraction of the weight and volume.\u003c\/p\u003e\n\u003cp\u003eThe MultiStar's alkaline action rests on two mechanisms: first, the alkaline pH (typically pH 9–11 in the concentrate) raises the solubility of organic fat molecules — in an alkaline environment, fats and oils are saponified, which makes them water-soluble and easier to wipe off. Second, the surfactants wrap soil particles through micelle formation and suspend them in the watery cleaning solution, so they get carried off with the water when you rinse. This combination is very effective against most organic vehicle grime.\u003c\/p\u003e\n\u003cp\u003eThe dilution flexibility lets you use the same base cleaner for very different cleaning strengths: in the engine bay, where stubborn oil and grease come off hard, heat-resistant surfaces, a strong concentration (1:5) is right and the surfaces handle the higher alkalinity. For the cabin, where delicate plastics, textiles and Alcantara get treated, a strong dilution (1:50 or more) is needed to avoid surface damage. Getting the ratio right is the key skill — too diluted and the cleaner doesn't bite; too little diluted and it can attack surfaces or leave residue.\u003c\/p\u003e\n\u003cp\u003eFor businesses running the MultiStar through foam lances or pressure washers, foaming behaviour matters: at the right dilution and used in snow-foam pre-wash mode, the MultiStar foams evenly and clings, which extends dwell time on dirty surfaces and improves the cleaning result. You can tune the foam consistency through the dilution and the right foam-lance nozzles.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the MultiStar right — dilution ratios for every job\u003c\/h3\u003e\n\u003cp\u003eUsing the MultiStar concentrate starts with the right dilution rate for the job at hand. For engine washing and heavy exterior grime: dilution 1:5 to 1:10 (10–20 % concentrate) — spray straight onto the dirty surface, let it dwell 2–3 minutes without drying off, then rinse with water. For wheel cleaning and underbody washing: dilution 1:10 to 1:20 (5–10 % concentrate) — same kind of application as the engine wash.\u003c\/p\u003e\n\u003cp\u003eFor general vehicle cleaning and pre-cleaning: dilution 1:20 to 1:50 (2–5 % concentrate) — suited as a foam-lance pre-cleaner or for hand washing with the sponge. This dilution is gentle on paint and plastic surfaces and leaves no damaging alkali residue. For interior cleaning and textiles: dilution 1:50 to 1:100 (1–2 % concentrate) — extra gentle on delicate surfaces; always test on an inconspicuous spot before going over Alcantara or sensitive coatings.\u003c\/p\u003e\n\u003cp\u003eKey application notes: always dilute the MultiStar fresh and don't store diluted solutions in spray bottles for long, since diluted alkaline solutions lose strength over time and can go off through microbial growth. When working with undiluted concentrate, watch your skin and eye protection — highly concentrated alkaline solutions can cause skin irritation. Keep the concentrate itself in dry, cool storage — undiluted and stored right, the concentrate stays stable for several years.\u003c\/p\u003e\n\n\u003ch3\u003eWhere the MultiStar fits — when the all-purpose cleaner is the most efficient choice\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is especially efficient in businesses that want to cover a broad range of cleaning jobs with a single product. Detailing businesses with mixed vehicle types (cars, vans, trucks) value the flexibility: one concentrate unit can handle the van's engine bay, the car's interior clean and the truck's pre-clean — each at the right dilution. Stock keeping gets simpler, ordering gets leaner.\u003c\/p\u003e\n\u003cp\u003eFleet carers and fleet managers on regular cleaning cycles get the most out of the bulk containers: the 25-litre or 60-litre container keeps supply steady without frequent reorders, and the cheaper per-unit pricing on bulk cuts the cleaning cost per vehicle. The 200-litre drum is built for central cleaning installations where the cleaner feeds straight into machines or foam generators.\u003c\/p\u003e\n\u003cp\u003eCompared with specialised cleaners like the \u003ca href=\"\/products\/sonax-profiline-multiclean-alkaline-vorreiniger\"\u003eSONAX PROFILINE MultiClean Alkaline\u003c\/a\u003e — developed as an optimised pre-cleaner for cold-foam pre-washing — the MultiStar offers a wider dilution range and more uses, but in turn less specialisation on the pre-wash side. If you only do pre-washing, you're better served by the MultiClean Alkaline; if you want a single cleaner for every job, the MultiStar concentrate has you covered.\u003c\/p\u003e\n\n\u003ch3\u003eThe MultiStar compared — all-purpose cleaner vs. specialist cleaner in the pro shop\u003c\/h3\u003e\n\u003cp\u003eWhether an all-purpose cleaner concentrate like the MultiStar or a range of specialist cleaners is the better call comes down to how the business is set up. An all-purpose cleaner brings simplicity, savings through bulk and flexibility — ideal for smaller to mid-sized operations that don't want to cover every cleaning job with a dedicated product. For especially demanding jobs (limescale removal → acidic cleaner, wheels heavily loaded with iron particles → dedicated wheel cleaner, sensitive displays → SensitiveSurface Detailer) specialist products are clearly superior.\u003c\/p\u003e\n\u003cp\u003eA proven strategy in well-set-up detailing businesses is the combination: the MultiStar as the base all-purpose cleaner for 80 % of all daily cleaning jobs, backed by one to three specialist products for the cases where the all-purpose cleaner falls short. This setup maximises economic efficiency (one main product in bulk) while keeping cleaning performance optimal for specific needs. The combination MultiStar + MultiClean Acid + a dedicated wheel cleaner, for example, fully covers the whole spectrum of alkaline and acidic cleaning needs in the vehicle space.\u003c\/p\u003e\n\u003cp\u003eAgainst all-purpose cleaners from other makers, the SONAX PROFILINE MultiStar offers the edge of proven system compatibility with other PROFILINE products and a professional formulation built for the specific demands of the vehicle segment. Household all-purpose cleaners are often tuned for other surfaces (floors, glass) and can leave residue or streaks on vehicle paint and sensitive plastics. The PROFILINE concentrate is tested on vehicle applications and certified accordingly for its compatibility with vehicle surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eBuy the SONAX PROFILINE MultiStar — containers, price tiers and shop recommendation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e comes in 1 litre, 5 litres, 10 litres, 25 litres, 60 litres and 200 litres. For single users and small businesses the 1-litre container is a manageable entry size — the concentrate goes a long way and a litre lasts a small business several weeks or months. The 5-litre container is the most economical standard size for mid-sized operations, while the 25-litre canister is the go-to for larger businesses with daily demand.\u003c\/p\u003e\n\u003cp\u003eThe price gap between the 1-litre and 60-litre containers is considerable — per 100 ml of concentrate, the price on the 60-litre container sits well below the price on the 1-litre. For wash bays and fleet care getting through several litres of cleaner a day, the investment in the big container pays off fast. The 200-litre drum is built for industrial cleaning installations and central supply setups, where the cleaner feeds straight into dosing pumps or automatic mixing systems.\u003c\/p\u003e\n\u003cp\u003eThe bottom line: the SONAX PROFILINE MultiStar is the most economical choice for businesses after a reliable, flexibly usable all-purpose cleaner in professional quality. The concentrate approach, the wide dilution flexibility and the bulk availability make it the ideal base cleaner in the PROFILINE range — backed by specialist products for particular cleaning needs.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":53505896055119,"sku":"D1-SNX-6273410","price":9.49,"currency_code":"EUR","in_stock":true},{"title":"2x 1 Liter Set","offer_id":53505896087887,"sku":"D1-SNX-6273410_2","price":18.98,"currency_code":"EUR","in_stock":true},{"title":"3 x 1 Liter Set","offer_id":53505896120655,"sku":"D1-SNX-6273410_3","price":28.47,"currency_code":"EUR","in_stock":false},{"title":"5 liters","offer_id":53505896153423,"sku":"D1-SNX-6275050","price":39.49,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":53505904017743,"sku":"D1-SNX-6276000","price":69.49,"currency_code":"EUR","in_stock":false},{"title":"25 liters","offer_id":53505904050511,"sku":"D1-SNX-6277050","price":169.49,"currency_code":"EUR","in_stock":false},{"title":"60 liters","offer_id":53505904083279,"sku":"D1-SNX-6278000","price":510.03,"currency_code":"EUR","in_stock":false},{"title":"200 liters","offer_id":53505904116047,"sku":"D1-SNX-6279000","price":1582.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-multistar-all-purpose-cleaner-universalreiniger.png?v=1730463356"},{"product_id":"sonax-profiline-microfibre-wash-mikrofaserwaschmittel","title":"PROFILINE Microfibre Wash Microfibre Detergent","description":"\u003ch2\u003eWash and revive microfibre cloths properly — SONAX PROFILINE Microfibre Wash\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE Microfibre Wash do? This dedicated detergent for microfibre cloths pulls polish, wax and coating residue out of the fine fibres, brings back the original absorbency and protects the fibre structure from wearing out before its time.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eMicrofibre cloths are the most heavily used consumable in pro detailing: every car burns through a dozen or more cloths across different jobs — pulling off polish, laying down sealant, cleaning glass, working the interior. Spending money on quality cloths like the \u003ca href=\"\/products\/sonax-profiline-coating-towel-mikrofasertuch\"\u003eSONAX PROFILINE Coating Towel\u003c\/a\u003e or the \u003ca href=\"\/products\/sonax-profiline-microfasertuch-glas-mikrofasertuch\"\u003eSONAX PROFILINE MicrofaserTuch Glas\u003c\/a\u003e only pays off if you wash them right and keep them, over many sessions, in the shape that holds onto their original performance. Standard detergents fall short here: they aren't built for the chemical residue of detailing work, they leave fabric-softener film that clogs the fibres, and they degrade the fibre structure over time. \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e is the detergent formulated specifically for what pro detailing demands: it fully dissolves polish, wax, silicone and coating residue out of the microfibres, skips the fabric softener that gums up the weave, and goes easy on the fine fibre structure that gives the cloths their absorbency and scratch-free character. Available in 1000 ml.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully dissolves polish, wax and coating residue out of microfibre cloths.\u003c\/strong\u003e The residue you get after detailing work is a real challenge for standard household detergent: cured polish remains, dried wax particles, silicone left over from dressings and hardened ceramic over-coat all block up the microfibres and noticeably drop their absorbency. SONAX PROFILINE Microfibre Wash is built for exactly this kind of residue and dissolves it without the aggressive chemistry that would damage the fibres.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFabric-softener-free — keeps the absorbency and cleaning power of the microfibres.\u003c\/strong\u003e Fabric softener is the enemy of good microfibre cloths: the substances in it settle on the microfibres and seal off their surface — the cloth feels soft, but it soaks up far worse. SONAX PROFILINE Microfibre Wash leaves out fabric-softener substances completely, so after the wash the fibres pull water like a brand-new cloth.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtects fine fibre structures — stretches the life of quality microfibre cloths considerably.\u003c\/strong\u003e Quality microfibre cloths for ceramic application, glass cleaning and pulling off polish don't come cheap. Wash them with the wrong detergent and you throw away the quality you paid for. SONAX PROFILINE Microfibre Wash extends their working life with a fibre-friendly formula and a clean that doesn't deform the fibre geometry. A cloth that lasts ten times longer pays back the detergent many times over.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Sort cloths by what they're used for and wash them separately — Coating Towels with hardened ceramic residue need a different wash than your everyday polish cloths. Put SONAX PROFILINE Microfibre Wash in at the right dose (follow the maker's spec, typically 50–100 ml per wash) straight into the machine, and wash the cloths at 30–40°C with no spin. The spin cycle deforms the microfibre pile. Never wash them with textiles made of other materials — cotton lint settles into the microfibres and drops the cleaning power for good. Let cloths air-dry after the wash, not in the tumble dryer — heat can change the fibre geometry. For Coating Towels carrying heavy residue, soak them first in lukewarm water with a few drops of Microfibre Wash, then wash — that loosens dried-on residue ahead of the machine clean.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFormula and how it works — how SONAX PROFILINE Microfibre Wash dissolves detailing residue\u003c\/h3\u003e\n\u003cp\u003eThe tricky part of washing detailing microfibre cloths is the sheer variety of residue you have to get out. After a day's work, a polish-removal cloth holds a mix of abrasive-particle remains, oil-based polish carrier, paint pigments from the panel you worked and possibly silicone from the lubricating additives in the polish. A \u003ca href=\"\/products\/sonax-profiline-coating-towel-mikrofasertuch\"\u003eCoating Towel\u003c\/a\u003e holds SiO₂ or ceramic particles that, depending on how far they've cured, can sit tight in the fibres. A glass cloth holds surfactant residue and mineral deposits from hard water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e takes on these different residue types with a formula that leans on several dissolving mechanisms: surfactants that wrap and emulsify the grease-based polish residue, complexing agents that break down mineral deposits from limescale or abrasive particles, and a neutral-to-mildly-alkaline pH base that even loosens inorganic coating particles without attacking the polyester fibres of the microfibre itself. The formula deliberately contains no cationic surfactants — those are the compounds in fabric softener responsible for that soft feel, but they clog the fibres at the same time.\u003c\/p\u003e\n\u003cp\u003eThe result after one wash with SONAX PROFILINE Microfibre Wash is a cloth that soaks up like new again: the fibres are free of residue, the capillary action of the microfibres is back, and the cloth's surface is even again, with no hardened zones. Wet a polish-removal cloth after the wash and wring it out, and you feel the difference straight away — after a proper Microfibre Wash cycle the cloth gives back noticeably more water when you wring it and soaks up fast again, the sign that the fibre channels are clear.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cloths benefit from SONAX PROFILINE Microfibre Wash — compatibility at a glance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e suits every quality microfibre cloth in detailing — both within the SONAX PROFILINE system and microfibre cloths from other makers. In the SONAX PROFILINE system, the key cloths that gain from proper care with Microfibre Wash are: the SONAX PROFILINE Coating Towel for ceramic application (proper care matters most here, since hardened ceramic residue ruins the cloth fast), the SONAX PROFILINE MicrofaserTuch Glas for streak-free glass cleaning (here fabric-softener residue wrecks the streak behaviour straight away) and all the standard microfibre cloths used for pulling off polish, laying on detailer and cleaning the interior.\u003c\/p\u003e\n\u003cp\u003eFor foam application pads like the SONAX PROFILINE CoatingApplicator, Microfibre Wash matters less — foam pads get cleaned differently. Wool pads and lambswool pads aren't washed with Microfibre Wash either, since their wool fibres have different care needs than synthetic microfibres. Microfibre Wash is tuned specifically for synthetic microfibres (polyester\/polyamide blends), which make up the bulk of pro detailing cloths.\u003c\/p\u003e\n\u003cp\u003eOne special case is breaking in new microfibre cloths: even factory-fresh cloths can carry sizing residue from textile production that limits absorbency on the first use. A wash with SONAX PROFILINE Microfibre Wash before the first job clears out this factory residue and gets the cloth pulling at full performance from the very first use. For pricier specialist cloths like the Coating Towel, this prep is well worth it.\u003c\/p\u003e\n\n\u003ch3\u003eUse in a professional setup — dose, wash programme and how much you need\u003c\/h3\u003e\n\u003cp\u003eIn a busy detailing operation with high cloth throughput, using \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e efficiently is part of running the numbers. Getting the dose right is the heart of it: too little detergent cleans incompletely and leaves residue in the fibres. Too much means needless cost and possibly surfactant residue if the cycle doesn't rinse enough. The maker's recommendation, depending on water temperature and load, sits at 50–100 ml per standard wash (5–7 kg load) — for cloths with very heavy residue (e.g. Coating Towels after ceramic application) you can dose at the top end.\u003c\/p\u003e\n\u003cp\u003eThe recommended wash programme for detailing microfibre cloths: a 30–40°C gentle programme with no fabric softener, a moderate spin (400–600 rpm max), a delicates programme if you have one. Higher temperatures (60°C and up) clean more aggressively, but on synthetic microfibres they can press the fibre cross-sections together and cut the capillary action for good. If you want to play it safe: 30°C plus a double rinse, paired with the right Microfibre Wash dose, gives very good results without thermal stress on the fibres.\u003c\/p\u003e\n\u003cp\u003eFor planning how much you need: a 1-litre bottle of SONAX PROFILINE Microfibre Wash lasts 10–20 washes with steady use, depending on dose and load. For an operation washing three times a week, one litre covers four to six weeks. That makes Microfibre Wash a very economical bit of kit: the protection it gives the far pricier microfibre cloths — whose life can triple with proper care — outweighs the cost of the detergent many times over.\u003c\/p\u003e\n\n\u003ch3\u003eVersus household detergents and alternatives — why a dedicated clean is the difference\u003c\/h3\u003e\n\u003cp\u003eThe question keeps coming up: can off-the-shelf detergent or alternative products do the same job as \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e? The short answer: not on par for pro detailing use. Here's the head-to-head. Standard heavy-duty detergents (Persil, Ariel and the like) are made for cotton and blends at 40–95°C. They often contain optical brighteners that settle on dark microfibre cloths and can leave white streak marks on the paint when the cloth is used to pull off polish. On top of that, many heavy-duty detergents contain cationic surfactants or get paired with fabric softeners that clog the fibre capillaries.\u003c\/p\u003e\n\u003cp\u003eDelicate detergents like Perwoll are gentler on fibres and more softener-free than heavy-duty types, but they too aren't built for the specific residue of car detailing. Polish oils, silicone remains and SiO₂ particles from ceramic coatings are far more stubborn than ordinary textile soiling. Delicate detergents emulsify these substances less effectively than a product tuned for detailing chemistry. The result: the cloth looks clean after the wash, but the fibres aren't fully clear of polish-oil residue — on the next job the cloth gives that residue back onto the freshly polished paint and can create a smeary film that drags down your polish finish.\u003c\/p\u003e\n\u003cp\u003eSome detailers use diluted \u003ca href=\"\/products\/sonax-profiline-all-purpose-cleaner-foam-universalreiniger\"\u003eSONAX PROFILINE All-Purpose-Cleaner\u003c\/a\u003e as a pre-treatment for heavily soiled cloths — that makes sense for a rough pre-wash, but it doesn't replace the final cycle with SONAX PROFILINE Microfibre Wash, which rinses the remaining emulsified residue out of the fibres and protects the fibre geometry. Pairing a pre-wash with All-Purpose-Cleaner and a main wash with Microfibre Wash is the most effective workflow for cloths carrying heavy polish or coating load — the pre-wash breaks up the coarsest residue, the main wash gives the fibres back their original absorbency.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE Microfibre Wash — when it's worth it and how you use it\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e comes as a 1000 ml bottle and is for anyone running pro microfibre cloths in detailing who wants to protect that investment. Choosing a dedicated detergent is choosing to run your cloth stock economically: buy ten SONAX PROFILINE Coating Towels at several euros each, then ruin them beyond repair with standard detergent after five jobs, and you've lost more money than a year's worth of Microfibre Wash would cost.\u003c\/p\u003e\n\u003cp\u003eFor detailing enthusiasts who do the occasional car and run a smaller set of cloths, Microfibre Wash already makes sense at ten to twenty cloths — even a single Coating Towel whose life triples from five to twenty jobs beats the price of a litre bottle of Microfibre Wash. For professional operations, Microfibre Wash isn't an optional extra but a fixed part of buying in supplies, right alongside polishes, sealants or pads.\u003c\/p\u003e\n\u003cp\u003eBottom line: SONAX PROFILINE Microfibre Wash is the logical companion to a quality microfibre-cloth stock. It protects the money you put into good cloths, fully restores the cleaning power after every job and keeps the SONAX PROFILINE cloth system — Coating Towel, MicrofaserTuch Glas and other specialist cloths — holding its value for years. One litre of detergent for 10–20 washes is one of the smallest, best-returning investments in a pro detailing setup.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57345101627727,"sku":"D1-SNX-4523000","price":14.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-microfibre-wash_1liter.png?v=1774731871"}],"url":"https:\/\/detiiling1.com\/collections\/profiline-universalreiniger.oembed","provider":"Detailing1","version":"1.0","type":"link"}