{"title":"Microfiber Cloth — SONAX","description":null,"products":[{"product_id":"sonax-profiline-coating-towel-mikrofasertuch","title":"PROFILINE Coating Towel Microfibre Cloth","description":"\u003ch2\u003eWipe ceramic coatings off clean — SONAX PROFILINE Coating Towel\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat's the SONAX PROFILINE Coating Towel for? The Coating Towel is a specialised microfibre cloth for removing ceramic coatings and sealants — with a fibre structure that lifts the fresh coating film off the paint evenly and without streaking.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen you lay down a ceramic coating, wiping off the excess film is the most critical step in the whole workflow: take it off too early and the coating film still drags, leaving wipe marks. Too late, and the cured film no longer comes off evenly — you get high spots that only come out with another round of polishing. The right cloth makes the difference in this phase: the \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e is a microfibre cloth built for the job, lifting the coating film off the paint evenly and streak-free within the right window. The fibre construction is tuned to coating work — soft enough not to tear at the fresh coating film, absorbent enough to pull the excess off completely. Available as a 6-pack for one-off use per car or a 50-pack for professional shops with high coating throughput.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecialised fibre structure for even removal of excess coating film with no high spots.\u003c\/strong\u003e The SONAX PROFILINE Coating Towel has a fibre geometry developed specifically for wiping coatings off: the fibre density and softness let you wipe the fresh SiO₂ or ceramic film off the paint evenly and without pressure points. The result is an even coating layer free of the dreaded high spots that show up with the wrong cloths when wipe pressure is uneven.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable as a 6-pack and a 50-pack — scales to any shop.\u003c\/strong\u003e The 6-pack is the ideal portion for single-car work: a fresh cloth per working zone per car, no risk of dragging coating between areas. The 50-pack is built for professional coating shops that seal several cars a day with ceramic or glass coating and need an economical stock on hand without constantly reordering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReusable after a proper wash with SONAX PROFILINE Microfibre Wash.\u003c\/strong\u003e The Coating Towel — with the right care — works for multiple uses. The catch is a thorough wash with a detergent that clears coating residue out of the microfibres without damaging the fibre construction. SONAX PROFILINE Microfibre Wash is the right partner: it dissolves even cured coating residue out of the fibres and restores the cloth's original absorbency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Always fold the \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e several times: fold a cloth once across and once lengthways and you get eight working faces — the fresh side up for every new wipe. As soon as one side is loaded with coating residue, refold and use the next clean side. That stretches how far one cloth goes per car and stops you smearing coating film you've already picked up. When you lift the coating film, work with light pressure in long, even passes in one direction — short, uneven wipes raise the high-spot risk. Right after the job, keep the cloth in a separate container away from your normal microfibres and wash it as soon as you can with SONAX PROFILINE Microfibre Wash — dried-on coating residue is far harder to get out than fresh.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFibre construction and material properties — why the Coating Towel isn't your usual microfibre cloth\u003c\/h3\u003e\n\u003cp\u003eThe first time you hold the \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e, you spot the difference from a standard microfibre right away: the fibre structure is noticeably finer, the weave feels silkier, and the surface has a real evenness with no rougher zones or seams on the working face. None of that is by chance — it's the result of targeted material work for a job where ordinary cloths regularly fall short.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e isn't a re-badged standard microfibre — it's a specialist cloth developed for the specific demands of coating work. The difference comes down to three properties that together define whether a cloth is coating-ready: first, the fibre density, picked so the coating film gets picked up rather than pushed around and re-spread by the fibres. Too loose a weave shifts the liquid coating film too much and creates unevenness. Too dense a weave doesn't pick the film up efficiently.\u003c\/p\u003e\n\u003cp\u003eSecond, the softness of the fibres: since ceramic coatings go on freshly polished, ready-to-seal paint, the Coating Towel has to work absolutely scratch-free on the surface. Hard fibres or seams on the working face would leave micro-scratches in the delicate early curing phase that show up as dull patches once everything's fully cured. The Coating Towel's fibres are certified soft for contact with coated paint.\u003c\/p\u003e\n\u003cp\u003eThird, the absorbency: the Coating Towel has to be able to pull the coating excess off completely without giving it back to the paint. With a saturated cloth — when it's taken on too much coating — you switch to a fresh side or a fresh cloth. That's the main reason a decent supply of Coating Towels matters so much for a professional coating workflow: better one cloth too many on hand than risking high spots with a saturated one.\u003c\/p\u003e\n\n\u003ch3\u003eRight use in the coating workflow — from application to the finished result\u003c\/h3\u003e\n\u003cp\u003eWhere the \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e sits in the SONAX PROFILINE coating workflow is clearly defined: it comes after the coating applicator and before the final level check. In detail: the coating goes on the paint with the \u003ca href=\"\/products\/sonax-profiline-coatingapplicator-applikationspads\"\u003eSONAX PROFILINE CoatingApplicator\u003c\/a\u003e, spread evenly, and then — within the window the maker recommends, typically 1–3 minutes depending on temperature and humidity — lifted off with the Coating Towel. The window is critical: during this phase the coating film is drawn thin and even across the paint surface, and the excess gets picked up.\u003c\/p\u003e\n\u003cp\u003eThe removal sequence: fold the Coating Towel (set up eight working faces), first wipe across the coated area with light to medium pressure, working in even passes top to bottom or left to right. After each pass, flip the cloth or use the next fresh fold. On big panels (bonnet, roof), break the area into segments and lift it off segment by segment — don't try to do the whole panel at once, or you may run past the window.\u003c\/p\u003e\n\u003cp\u003eAfter the first removal with the Coating Towel comes the level check with a fresh cloth face in direct light — raking light or a detailing light shows any leftover unevenness, which you can fix straight away with the Coating Towel while the film hasn't cured yet. Once fully cured (typically after 24–48 hours depending on the coating system), any leftover high spots only come out with another round of polishing — a fiddly step you avoid by using the Coating Towel properly.\u003c\/p\u003e\n\n\u003ch3\u003eCare and reusability of the Coating Towel — how long a cloth lasts\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e is built for repeated use — on one important condition: the right care after you've used it. Coating residue that dries into the cloth forms hard, crystalline structures that compromise the soft fibre structure next time out and, worst case, leave scratches on fresh paint. So if you just fold the cloth up after use and toss it in a box, you risk starting the next coating project with a damaged cloth.\u003c\/p\u003e\n\u003cp\u003eThe right care starts right after the job: drop the cloth straight into a separate container away from your normal microfibres and polishing cloths. Coating residue can contaminate other cloths and lead to unwanted layers on other surfaces. Then wash it as soon as you can — fresh coating residue comes out far more easily than cured. \u003ca href=\"\/products\/sonax-profiline-microfibre-wash-mikrofaserwaschmittel\"\u003eSONAX PROFILINE Microfibre Wash\u003c\/a\u003e is the recommended detergent partner: it's formulated for washing microfibres with specific chemical residue and dissolves ceramic leftovers out of the fibres too, without attacking the fibre structure. The wash temperature shouldn't go above 40°C, since high heat can damage the fibres.\u003c\/p\u003e\n\u003cp\u003eWith the right care, a SONAX PROFILINE Coating Towel will do 10–20 uses before the fibre quality noticeably drops off. That makes the cloth a genuinely sensible consumable despite the specialist job. In a professional shop, we recommend swapping the cloths out after a set number of uses rather than hanging on too long to a \"maybe still usable\" cloth — especially with ceramic coatings, which take hours of prep work, the removal cloth is the last link in a long quality chain.\u003c\/p\u003e\n\n\u003ch3\u003eCoating Towel for ceramic, glass coating and polymer sealants — the range of use at a glance\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e isn't tied to one specific coating system — it suits all SiO₂-based ceramic coatings, glass coatings and polymer sealants applied in liquid form and lifted off while fresh. That covers all SONAX PROFILINE CeramicCoating systems: \u003ca href=\"\/products\/sonax-profiline-ceramiccoating-cc-one-paint-keramikversiegelung\"\u003eCC One (Paint)\u003c\/a\u003e, \u003ca href=\"\/products\/sonax-profiline-ceramiccoating-cc-pro-paint-keramikversiegelung\"\u003eCC Pro (Paint)\u003c\/a\u003e and \u003ca href=\"\/products\/sonax-profiline-ceramiccoating-cc-evo-zwei-stufen-keramikversiegelung\"\u003eCC Evo (two-stage)\u003c\/a\u003e are the direct system partners the Coating Towel is specified as the recommended removal cloth for. It's also the right removal cloth for CC Rim (wheel sealant), CC HeadlightCoating (headlight sealant) and CC Vinyl+PPF (film sealant).\u003c\/p\u003e\n\u003cp\u003eFor the SONAX PROFILINE spray sealants (SpeedProtect, Spray+Seal, Ceramic SprayCoating, BrilliantShine Detailer) the Coating Towel works too, even if standard microfibres would do in most cases here — the spray sealants ask less of the removal cloth than curing ceramic coatings do. For the heavy-duty coating systems CC Pro and CC Evo, with their longer cure times and thicker layers, the specialist Coating Towel is clearly the better call.\u003c\/p\u003e\n\u003cp\u003eOn other surfaces — glass, wheels, plastic — the Coating Towel works as well, as long as the applied substance is meant to come off while fresh. For glass care with SONAX PROFILINE Glass Detailer or similar products, though, the SONAX PROFILINE Microfibre Cloth Glass is the better fit, since it's tuned for streak-free glass cleaning.\u003c\/p\u003e\n\n\u003ch3\u003eBuy the SONAX PROFILINE Coating Towel — quantity planning and usage guide\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Coating Towel\u003c\/strong\u003e comes in two pack sizes: 6 for flexible one-off or occasional use, and 50 for professional shops with high coating throughput. Which pack size is right depends on the work you've got planned. For a detailing enthusiast or smaller shop sealing one to three cars a month with ceramic coating, the 6-pack is the right call: the demand for Coating Towels is manageable, and six cloths cover two to three cars no problem.\u003c\/p\u003e\n\u003cp\u003eFor professional coating shops sealing several cars a day or a week with coating systems, the 50-pack is the more economical choice. The price advantage over the 6-pack is significant, and a decent cloth supply stops you running out of material mid-session. If you go through three to four Coating Towels per car (depending on car size and how much you're coating) and coat five cars a week, a 50-pack keeps you covered for two to three weeks.\u003c\/p\u003e\n\u003cp\u003eQuantity planning tip: for each vehicle segment (e.g. just paint areas without trim), plan for at least two cloths — one for the removal, one for the check and touch-up. For a compact car with full coating (paint, glass, wheels), four to six cloths is realistic planning. The SONAX PROFILINE Coating Towel is a consumable that directly affects the quality of the coating result — skimping on the cloth here raises the risk of high spots and rework, which costs far more than an extra cloth.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"6 pieces","offer_id":57345154974031,"sku":"D1-SNX-4511000","price":26.3,"currency_code":"EUR","in_stock":true},{"title":"50 pieces","offer_id":57345155006799,"sku":"D1-SNX-4513410","price":121.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-coating-towel_50-stueck.png?v=1774736529"},{"product_id":"sonax-profiline-microfasertrockentuch-plus-mikrofasertuch","title":"PROFILINE MicrofaserTrockenTuch \"PLUS\" Microfibre Cloth","description":"\u003ch2\u003eScratch-free drying in pro format — SONAX PROFILINE MicrofaserTrockenTuch \"PLUS\"\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat sets a pro drying towel apart from any old microfibre cloth? The SONAX pro drying towel pairs serious soak-up with a soft, scratch-safe face — for fast, streak-free drying with no water marks left on paint or glass.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eDrying after the wash is where a lot of scratches actually happen — not during the wash itself. Hard fibres, too little soak-up or the wrong material drag grit across freshly washed paint and leave fine holograms or wipe marks behind. The \u003cstrong\u003eSONAX PROFILINE MicrofaserTrockenTuch \"PLUS\"\u003c\/strong\u003e is built for exactly this make-or-break step: a high-absorbency microfibre weave pulls the wash water up over a wide area, so you don't have to drag the towel back over the same spot again and again.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh soak-up — wide-area drying in just a few passes.\u003c\/strong\u003e The PLUS quality comes down to fibre density and a layered build: the microfibres are woven tight enough to take water not just at the surface but deep into the cloth. That knocks the water film down with every pass and lets you dry a whole car in far fewer passes than thin standard cloths.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft microfibres for scratch-free work on paint and glass.\u003c\/strong\u003e The PROFILINE towel's fibres are made to put as little mechanical load on the paint as possible. Hard material or coarse fibres act like sandpaper on wet paint — fine marring you only spot once the sun hits the panel. The soft PROFILINE fibres glide over the surface and lift water without pressing grit into the paint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable as a single cloth and as pro packs of 24 and 50.\u003c\/strong\u003e The drying towel comes as a single piece for the home detailer plus 24-piece and 50-piece packs for detailing businesses and car washes. The pro packs keep you stocked in commercial use, where you dry plenty of cars a day and a stack of fresh, clean cloths is non-negotiable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe quality of a drying towel only really shows on the second and third use: cheap microfibre cloths lose their soak-up after a few washes, because the fibres gum up with detergent residue or shrink at the wrong wash temperature. The PROFILINE towel is built to last — the fibre structure holds its absorbency over many wash cycles when you treat it by the care notes. That makes the higher up-front price pay off against bargain cloths, because you're not replacing them after a few weeks.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e When you dry, go with the \"pat-and-drag\" method: lay the towel on, press it down gently, then glide it flat across the surface — instead of pressing and rubbing. That way the cloth's soak-up does the work without grinding grit into the paint. For maximum efficiency you can also fold the MicrofaserTrockenTuch \"PLUS\" double — a bigger contact pad takes up more water per pass. After use, wash the cloth at 40°C max with no fabric softener — softener seals the microfibre pores and kills the soak-up for good.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMicrofibre tech of the SONAX PROFILINE MicrofaserTrockenTuch \"PLUS\" — build and soak-up\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MicrofaserTrockenTuch \"PLUS\"\u003c\/strong\u003e uses a multi-layer microfibre structure that works on the capillary principle: fine fibres form a dense capillary net that actively pulls water out of the contact zone and deep into the cloth. Unlike single-layer microfibre cloths, where the outer layer saturates fast and the water stays on the paint, the PLUS cloth keeps taking water on over the whole drying session.\u003c\/p\u003e\n\n\u003cp\u003eThe fibre thickness is dialled in for drying on delicate paint. Microfibres come in different deniers — thinner fibres with more of them per area are softer but more absorbent; thicker fibres are tougher but rougher. The PROFILINE drying towel finds the balance: enough softness for scratch-free contact with polished surfaces, and enough fibre density for high soak-up per pass.\u003c\/p\u003e\n\n\u003cp\u003eThe size is built for drying a whole panel fast — bonnet, roof, door — in one or two passes. A cloth that's too small means constant refolding and more wiping overall, which bumps up the scratch risk. The PROFILINE PLUS format lets you work big areas in a few passes, which saves time and goes easy on the paint.\u003c\/p\u003e\n\n\u003cp\u003eHow long the microfibre structure lasts comes down mostly to care. Washing with no fabric softener at 40°C max is the number-one rule: softener lays a film over the microfibres and cuts their soak-up for good. Tumble-drying low or air-drying keeps the fibre structure better than high heat, which can melt the fibres together. Looked after right, the PLUS cloth holds its absorbency over dozens of washes.\u003c\/p\u003e\n\n\u003cp\u003eOne key quality mark of PROFILINE microfibre cloths is the check for contaminants and dyes. Cheap microfibre cloths can carry dye residue from production that bleeds onto wet paint on first use and leaves discolouration. SONAX uses tested microfibre materials in the PROFILINE line that are free of damaging residue — important when the cloth goes onto freshly sealed or polished surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the drying towel — technique and workflow after the wash\u003c\/h3\u003e\n\n\u003cp\u003eThe right drying technique is what separates pro work from a quick home wash. For pro drying you start at the highest panels (roof, bonnet) and work down — that way leftover water runs down to be taken up last. Sills and lower door edges, where water pools, get done last, since they need more pressure and soak-up work.\u003c\/p\u003e\n\n\u003cp\u003eThe number-one rule when drying with microfibre: lay the cloth, don't rub. Too aggressive a wipe pushes the cloth into the paint and acts like gentle sanding, especially if sand or brake dust didn't fully wash out. The wide-area lay technique of the PROFILINE PLUS cloth uses the cloth's own weight and the capillary action for water pickup — no pressure, no rubbing.\u003c\/p\u003e\n\n\u003cp\u003eIn detailing businesses a clearly defined cloth-rotation system applies: every fresh cloth gets swapped after one car if it's visibly soiled. Lightly damp cloths can run across several cars as long as they haven't picked up grit. The 24-piece and 50-piece packs of the PROFILINE drying towel make that rotation work without breaking the workflow — enough spare cloths for a full day across several cars.\u003c\/p\u003e\n\n\u003cp\u003eOn freshly sealed or waxed cars, go extra gentle: only use the drying towel with minimal pressure on fresh sealants, since a sealant in its early cure phase can react badly to mechanical pressure. In that case a blow-dryer step (compressed air or a blower) before the towel step is worth it, to take off most of the water film with no cloth contact at all.\u003c\/p\u003e\n\n\u003ch3\u003eWhere the PROFILINE drying towel fits — home use, professional and commercial\u003c\/h3\u003e\n\n\u003cp\u003eThe PROFILINE drying towel covers a wide range of jobs. For home detailers washing their own car by hand regularly, the single cloth is the ideal format — long-lasting enough for the whole life of the car when looked after right. One or two drying towels in the house cover normal needs completely.\u003c\/p\u003e\n\n\u003cp\u003eFor detailing enthusiasts running several cars or doing more involved jobs, the 24-piece pack is the way to go. With a dozen fresh cloths you can dry a whole car without touching the same spot twice with the same cloth — maximum scratch prevention through strict cloth rotation. The rest stand ready for glass and interior jobs, where the \u003ca href=\"\/products\/sonax-profiline-microfasertuch-glas-mikrofasertuch\"\u003eSONAX PROFILINE MicrofaserTuch \"Glas\"\u003c\/a\u003e is the specialist for streak-free window and glass cleaning.\u003c\/p\u003e\n\n\u003cp\u003eFor commercial work — car detailing, vehicle prep at the dealership, mobile detailing services — the 50-piece pack is the most economical unit. The price per cloth drops a lot in the big pack against buying singles, and the quantity covers several days of use with no wash in between. For shops doing plenty of cars a day, a well-organised cloth stock is a real factor in efficiency and quality control.\u003c\/p\u003e\n\n\u003cp\u003eBeyond drying bodywork panels, the drying towel also suits wheels, windows and chrome — anywhere you want the water off residue-free. On wheels rinsed after a wheel cleaner, an absorbent drying towel makes sense to stop water spots on the spokes. A separate cloth for that area — not the same one as for paint — stops brake dust or cleaner residue carrying over onto paint.\u003c\/p\u003e\n\n\u003ch3\u003eMicrofaserTrockenTuch \"PLUS\" compared — SONAX PROFILINE microfibre cloths\u003c\/h3\u003e\n\n\u003cp\u003eIn the SONAX PROFILINE microfibre range, the PROFILINE drying towel has a specific job: it's the drying towel — dialled in for maximum soak-up and big areas. The \u003ca href=\"\/products\/sonax-profiline-microfasertuch-soft-touch-mikrofasertuch\"\u003eSONAX PROFILINE MicrofaserTuch \"Soft Touch\"\u003c\/a\u003e is built for polishing work — softer, but less absorbent, ideal for buffing off polishes and waxes. The \u003ca href=\"\/products\/sonax-profiline-microfasertuch-glas-mikrofasertuch\"\u003ePROFILINE MicrofaserTuch \"Glas\"\u003c\/a\u003e is dialled in for smoothness and streak-free results on glass. Each cloth has its set job — and the PLUS drying towel fills the most important one: fast, scratch-free drying after the wash.\u003c\/p\u003e\n\n\u003cp\u003eAgainst chamois leathers or synthetic window blades, the microfibre cloth brings real advantages: it's washable, long-lasting, gentler on paint and gives off no dyes or chemical residue. A chamois needs regular keep-it-damp care and can go hard if stored wrong, then it starts scratching. The PROFILINE PLUS drying towel pairs soak-up, size and softness in one format made for pro results.\u003c\/p\u003e\n\n\u003cp\u003eFor the \u003ca href=\"\/products\/sonax-profiline-coating-towel-mikrofasertuch\"\u003eSONAX PROFILINE Coating Towel\u003c\/a\u003e there's a clearly separate job: the Coating Towel is purely for taking off and spreading ceramic coatings and shouldn't be used as a general drying towel, to keep the coating fibres from getting contaminated. The PLUS drying towel and the Coating Towel work together in pro detailing — each for its own step in the process.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the SONAX PROFILINE MicrofaserTrockenTuch \"PLUS\" — format, quantity and planning\u003c\/h3\u003e\n\n\u003cp\u003eThe PROFILINE drying towel comes in three formats: single cloth, 24-piece pack and 50-piece pack. Picking the right one comes down to how much you use: home detailers go single, enthusiasts the 24-pack, commercial shops the 50-pack.\u003c\/p\u003e\n\n\u003cp\u003eIf you're just getting into proper microfibre use, you can start with the single cloth and judge the quality in your own hands before grabbing a bigger pack. The PLUS cloth's longevity makes the single buy pay off even for occasional users — a well-cared-for drying towel lasts several years of car ownership. For shops with regular demand, the 50-pack is the most economical option with the lowest price per cloth.\u003c\/p\u003e\n\n\u003cp\u003eThe SONAX PROFILINE microfibre system has the right cloth for every job: the PLUS drying towel for the drying phase, the \"Glas\" cloth for windows and mirrors, the \"Soft Touch\" cloth for polishing and sealant removal and the Coating Towel for ceramic coatings. With all four cloths in the set you're fully kitted for pro detailing — no compromises on material choice and no risk of reaching for the wrong cloth in the wrong place.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1 piece","offer_id":57345157497167,"sku":"D1-SNX-4512000","price":22.49,"currency_code":"EUR","in_stock":true},{"title":"24 pieces","offer_id":57345157529935,"sku":"D1-SNX-4516000","price":218.96,"currency_code":"EUR","in_stock":true},{"title":"50 pieces","offer_id":57345157562703,"sku":"D1-SNX-4515000","price":689.01,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-microfasertrockentuch-plus_1-stueck.png?v=1774736624"},{"product_id":"sonax-profiline-microfasertuch-glas-mikrofasertuch","title":"PROFILINE MicrofaserTuch \"Glas\" Glass Microfibre Cloth","description":"\u003c!-- BLOCK 1: body_html --\u003e\n\u003ch2\u003eStreak-free glass cleaning in a pro setting — SONAX PROFILINE MicrofaserTuch Glas\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX PROFILINE MicrofaserTuch Glas stand out? This highly absorbent, lint-free pro microfibre cloth is built specifically for cleaning automotive glass — streak-free results on the windscreen, side windows and rear window with no re-polishing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eA streak-free finish on glass is one of the toughest disciplines in car care: water, glass cleaner, fingerprints and greasy films all leave visible traces on glass that jump out under flat light or in backlight (sun glare on the motorway). The \u003cstrong\u003eSONAX PROFILINE MicrofaserTuch Glas\u003c\/strong\u003e was built for exactly this challenge — a highly absorbent, lint-free microfibre cloth designed specifically for cleaning glass on vehicles. The fibre structure is tuned for maximum uptake of glass cleaner while pulling off lint-free and streak-free. The set of 3 gives you a sensible, cost-effective base kit for pro work on vehicles of all sizes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLint-free fibre structure for a streak-free glass finish with no rework.\u003c\/strong\u003e The one quality that makes or breaks a glass microfibre cloth is being lint-free: ordinary household microfibre or cheap cloths leave fine fibres and fluff on the glass that show up as haze or smearing in backlight. The SONAX PROFILINE MicrofaserTuch Glas is woven from fibres that, used properly, leave no residue on the glass — the result is clear, streak-free glass after a single wipe, with no fiddly re-polish using a second cloth.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh absorbency for full uptake of glass cleaner without smearing.\u003c\/strong\u003e A good glass cloth has to soak up all the glass cleaner you apply without smearing it across the surface or dragging it into streaks. The fibre density and structure of the SONAX PROFILINE MicrofaserTuch Glas is optimised for exactly that: glass cleaner gets fully absorbed, dirt particles are trapped in the fibres rather than just wiped around. That cuts the number of passes you need per pane and gets you an efficient, clean result.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSet of 3 for pro multi-pane work with no interruptions.\u003c\/strong\u003e The SONAX PROFILINE MicrofaserTuch Glas comes in a set of three — ideal for pro work where you clean several panes back to back. For the best results, don't use one cloth for every pane on a car once it's visibly saturated. With three cloths you can work efficiently: one for the windscreen, one for the side windows, one in reserve. After the job, collect the cloths in a separate laundry bag and wash them together with \u003ca href=\"\/products\/sonax-profiline-microfibre-wash-mikrofaserwaschmittel\"\u003eSONAX PROFILINE Microfibre Wash\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common problem with glass cleaning isn't the wrong glass cleaner — it's the wrong wiping method. With the SONAX PROFILINE MicrofaserTuch Glas we go for the two-cloth method to get it perfect: dampen cloth 1 with glass cleaner (e.g. \u003ca href=\"\/products\/sonax-profiline-glasscleaner-glasreiniger\"\u003eSONAX PROFILINE GlassCleaner\u003c\/a\u003e diluted from the concentrate) and wipe the pane in circular motions — that lifts and picks up the dirt. Then run cloth 2 (dry, fresh) over the same area in a cross-hatch pattern — that pulls off the glass cleaner residue and gets you the streak-free finish. Important: never wash glass cloths together with cloths that have touched wax, silicone or polish — contamination from greasy residue is the number-one reason for streaks even with a fresh cloth. A separate wash and separate storage for glass cloths is a must in a pro setting.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eGlass-cloth microstructure — why not every microfibre cloth suits glass\u003c\/h3\u003e\n\u003cp\u003eNot all microfibre cloths are suited to glass cleaning — and that comes down to the fibre structure. Standard microfibre cloths for car care (polishing cloths, applicator cloths) have a fibre structure optimised for picking up and evenly spreading polishes, waxes and coatings. These cloths are often made from fibres with a particular split pattern that gives high surface roughness and strong cleaning bite — great for panels, but a problem on glass, because the rough structure can leave micro-scratches on untreated glass and makes streaking more likely.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MicrofaserTuch Glas\u003c\/strong\u003e uses a fibre structure tuned specifically to what glass cleaning needs: finer, smoother fibres that release from the glass without residue, combined with enough fibre density for full uptake of glass cleaner. The difference from a standard cloth shows clearly in the result: where a standard cloth often leaves fine smears and fibre lines on glass, the glass cloth delivers a clear, transparent finish on a clean surface.\u003c\/p\u003e\n\u003cp\u003eAnother mark of a pro glass cloth is the edge finishing: frayed or badly stitched edges shed fibres onto the glass, especially near the borders and along wiper edges. The SONAX PROFILINE MicrofaserTuch Glas has its edges finished for pro work — worked so no stray fibres come off in use and spoil the glass finish.\u003c\/p\u003e\n\n\u003ch3\u003eCleaning glass on the vehicle — using the microfibre cloth right day-to-day\u003c\/h3\u003e\n\u003cp\u003eGlass cleaning in a pro detailing setting follows a clear sequence, and the quality of the cloth you use is decisive for the end result. Step 1: remove heavy dirt. Insect remains, bird droppings and coarse dirt particles shouldn't be wiped straight off with the microfibre cloth — that ramps up the scratch risk. First loosen the coarse stuff with a damp cloth (under light pressure) or by pre-soaking with glass cleaner, then rinse off with plenty of water.\u003c\/p\u003e\n\u003cp\u003eStep 2: apply glass cleaner. Dampen the SONAX PROFILINE MicrofaserTuch Glas evenly with the diluted glass cleaner (not too wet, not too dry) and wipe the pane in overlapping, even strokes. Circular motions help lift dried-on contamination and greasy films. Step 3: dry pull-off. Wipe over the same area with a second, dry SONAX PROFILINE MicrofaserTuch Glas in a cross-hatch direction — that removes the glass cleaner residue completely and lands the final result.\u003c\/p\u003e\n\u003cp\u003eThe inside of the glass plays by its own rules: the inside of the windscreen is one of the trickiest areas in car care, because outgassing from the interior trim (plasticisers, plastic residues) builds up an oily film that's hard to shift with normal glass cleaner. For really stubborn interior films, go for a more concentrated glass cleaner or a dedicated glass cleaner concentrate. The SONAX PROFILINE MicrofaserTuch Glas works on the inside glass too — its lint-free nature matters there especially, since fibres on the inside pane show up annoyingly in backlight while you're driving.\u003c\/p\u003e\n\n\u003ch3\u003eCare and washing of glass cloths — how they keep their performance long-term\u003c\/h3\u003e\n\u003cp\u003eThe performance of the \u003cstrong\u003eSONAX PROFILINE MicrofaserTuch Glas\u003c\/strong\u003e hangs directly on the right care. A badly washed or contaminated glass cloth won't give you a streak-free result even with the best glass cleaner — the most common cause of sudden streaking \"for no obvious reason\" is a contaminated cloth. Greasy products like waxes, silicone sprays, care greases and polishing pastes are the main contaminants: once a cloth has touched these, it sheds fine greasy residue when you wipe glass and creates smears.\u003c\/p\u003e\n\u003cp\u003eThe right wash routine for glass microfibre cloths: wash them separately from other cloths that have touched greases or polishes. Use a mild, surfactant-free detergent or \u003ca href=\"\/products\/sonax-profiline-microfibre-wash-mikrofaserwaschmittel\"\u003eSONAX PROFILINE Microfibre Wash\u003c\/a\u003e — made specifically for microfibre cloths, with no fabric softener or fragrance additives. Machine wash at 30–40 °C; no fabric softener (softener fills up the microfibres and permanently reduces absorbency and cleaning power). After washing, air-dry or tumble on low with no high-heat setting.\u003c\/p\u003e\n\u003cp\u003eAnother side of cloth care is storing them right: glass cloths should be kept clean, dry and separate from other cloths. In plastic bags or cloth bins that also hold other product categories, you risk cross-contamination. In a pro setting it pays to separate cloth types by colour or labelling — glass cloths in a specific colour or with a tag, so they don't get grabbed by mistake for paint or plastic in the day-to-day.\u003c\/p\u003e\n\n\u003ch3\u003eThe SONAX PROFILINE cloth range at a glance — the right cloth for every job\u003c\/h3\u003e\n\u003cp\u003eThe SONAX PROFILINE microfibre cloth range offers specialised cloths for different jobs. Alongside the \u003cstrong\u003eSONAX PROFILINE MicrofaserTuch Glas\u003c\/strong\u003e for glass cleaning there are more specialist cloths for different tasks in a pro setting. The PROFILINE MicrofaserTuch \"Soft Touch\" is built for gentle work on paint surfaces — clearly thicker fibres, more cushioning as you wipe, good for taking off detailers, quick detailers and light care products. The softer structure protects the paint from micro-scratches while wiping.\u003c\/p\u003e\n\u003cp\u003eThe PROFILINE MicrofaserTrockenTuch \"PLUS\" is the workhorse for drying a vehicle after the wash — very absorbent and big enough to get a whole car dry with just a few cloths. For applying a ceramic coating there's the PROFILINE Coating Towel: ultra-soft, lint-free and made for precisely removing ceramic coating residue. Using a Coating Towel for glass cleaning is possible but not ideal — the glass cloth is better suited to glass.\u003c\/p\u003e\n\u003cp\u003eCombining all the cloth types from the SONAX PROFILINE range — glass cloth, Soft Touch, drying cloth, Coating Towel — lets you cover every cleaning task in a pro setting with the tool tuned for it. Investing in specialised cloths pays off through better results and longer cloth life: a glass cloth built for its job delivers more glass-cleaning performance per wash than a universal cloth — and lasts longer, because it isn't overloaded with unsuitable products.\u003c\/p\u003e\n\n\u003ch3\u003eBuy the SONAX PROFILINE MicrofaserTuch Glas — recommendation and bottom line\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MicrofaserTuch Glas\u003c\/strong\u003e comes in a set of 3 — a sensible base kit for pro work on cars. For businesses with high vehicle throughput, or to kit out several staff, it's worth ordering several sets so you always have fresh cloths on hand while the used ones are in the wash. A decent cloth reserve on site stops you compromising on the glass result with cloths that are too wet or already saturated.\u003c\/p\u003e\n\u003cp\u003eWho it's for: professional detailing businesses with a glass-cleaning service; detailing studios that offer glass treatments (sealants, polishing) alongside paint work; workshops with a vehicle-cleaning service; and keen home users who want streak-free glass without having to invest in pricey universal cloths. With its price, the set of 3 is a cheap way to try out and get a feel for genuine pro glass-cloth material.\u003c\/p\u003e\n\u003cp\u003eTo sum up, the SONAX PROFILINE MicrofaserTuch Glas is the right tool for anyone who won't compromise on glass cleaning. The lint-free, highly absorbent fibre structure, the careful edge stitching and the design built specifically for automotive glass make it the first choice for professional glass cleaning in a detailing setting.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"3 pieces","offer_id":57345158709583,"sku":"D1-SNX-4515410","price":9.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-microfasertuch-glas_3-stueck.png?v=1774736634"},{"product_id":"sonax-profiline-microfasertuch-soft-touch-mikrofasertuch","title":"PROFILINE MicrofaserTuch \"Soft Touch\" Microfibre Cloth","description":"\u003ch2\u003eWipe off polish residue, spread sealants, look after surfaces — with the SONAX PROFILINE MicrofaserTuch \"Soft Touch\"\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX PROFILINE MicrofaserTuch \"Soft Touch\" stand out? This all-round detailing microfibre with a soft, plush pile pulls polish residue, cleaner and sealant off paint, glass and plastic — no scratches, no streaks, ready for every common detailing job.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eA microfibre cloth is not just a microfibre cloth. If you swap the different cloths you need for different jobs — wiping off polish, cleaning glass, spreading sealant — for household microfibre, you pay more in the long run: scratches on dark paint, streaks on glass, and patchy coating results. The \u003cstrong\u003eSONAX PROFILINE MicrofaserTuch \"Soft Touch\"\u003c\/strong\u003e is the all-round detailing cloth for every common job on paint, glass and plastic — soft enough for delicate surfaces, thirsty enough to wipe off cleanly, tough enough for the daily grind.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft plush pile for scratch-free work on paint and glass.\u003c\/strong\u003e The fine fibres of the Soft Touch are woven so their tips end up rounded and soft — no sharp fibre ends that leave micro-marring on the clearcoat under pressure. That really matters on dark paint and metallic finishes, where the smallest scratch jumps out in raking light. A cloth that leaves its own marks while you wipe off polish undoes the whole correction job.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh absorbency to wipe off polishes and cleaners completely.\u003c\/strong\u003e The pile weave of the Soft Touch grabs moisture and product residue and holds onto it instead of dumping it back on the paint. Wiping off polish residue after a DA polish or clearing away cleaning foam, you get no haze left behind. That's the baseline for a genuinely clean, streak-free finish after every detailing step.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable in 3-pack and 50-pack for any need.\u003c\/strong\u003e The 3-pack covers a hobby detailer or one-off jobs; the 50-pack is the economical call for pro outfits going through several cloths a day. Both hold the exact same high-quality cloth — the only difference is the price per cloth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Always fold the Soft Touch into four before you use it — that gives you eight clean working faces from a single cloth. Once one side is saturated or loaded with polish, just flip to a fresh face. Wash new cloths before first use without fabric softener — softener kills absorbency for good and is the number one reason microfibre cloths start leaving streaks on the surface.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMicrofibre tech in detail — what \"Soft Touch\" means and how the fibre structure works\u003c\/h3\u003e\n\n\u003cp\u003eThe name \"Soft Touch\" describes the specific weave of the \u003cstrong\u003eMicrofaserTuch \"Soft Touch\"\u003c\/strong\u003e. Unlike smoother microfibre with a tight weave, a pile weave has a raised, woolly surface that gives a far bigger effective contact area with the surface you're cleaning. Each of those raised fibres is finely split — typically into 16 or more microfibre strands per fibre — which gives a huge surface area for soaking up liquid and lifting particles.\u003c\/p\u003e\n\n\u003cp\u003eHow fine the fibres are sets the softness and the cleaning behaviour. Microfibre is rated by denier, which tells you how fine the individual fibres are. The finer the denier, the softer the cloth and the lower the scratch risk on delicate surfaces. The Soft Touch runs a fine fibre structure that's right for detailing work on paint and glass — without the abrasive bite of coarser textiles.\u003c\/p\u003e\n\n\u003cp\u003eOne more thing: the pile of the Soft Touch holds dirt particles and product residue down in the gaps between the fibres. They don't drop straight back onto the surface when you set the cloth down again — something smoother microfibre does far more. That cuts the risk of dragging lifted dirt back across the paint on a second pass. Still, the rule stands: even the softest cloth shouldn't be wiped dry over a dirty surface — if there's grit on the paint, always rinse first, then wipe off with the cloth.\u003c\/p\u003e\n\n\u003cp\u003eMicrofibre ages differently from other textiles. Every wash trims a tiny bit of fibre length and surface off. That ageing is much slower on quality Soft Touch microfibre than on cheap household stuff, but you can't avoid it. Pros check their cloths regularly: a cloth that feels rough, shows bright worn patches or has clumped, matted fibres on a close look is past its prime and should be pulled from detailing duty. For the final check on paint and glass, you always reach for the freshest, best-kept cloth in the set.\u003c\/p\u003e\n\n\u003cp\u003eHow long the Soft Touch lasts comes straight down to how you look after it. Washing without softener and at moderate temperatures (30–40 °C) keeps the fibre structure intact. High dryer heat can melt the fine microfibres together and glaze the surface — that kills absorbency for good and makes the cloth useless for detailing. With the dedicated \u003ca href=\"\/products\/sonax-profiline-microfibre-wash-mikrofaserwaschmittel\"\u003eSONAX PROFILINE Microfibre Wash\u003c\/a\u003e you pull polish and chemical residue fully out of the fibres without trashing the structure.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the MicrofaserTuch \"Soft Touch\" right — where it works and how to use it\u003c\/h3\u003e\n\n\u003cp\u003eThe most universal job for the Soft Touch is wiping off polishing oils after machine paint correction. After polishing, residue is left as a whitish film on the paint. A thirsty, soft cloth lifts that film completely without laying down fresh marks on the freshly polished surface. The Soft Touch is spot-on for this because it's absorbent enough to pull even stubborn polish residue off in a single pass.\u003c\/p\u003e\n\n\u003cp\u003eFor exterior glass cleaning — wiping off the \u003ca href=\"\/products\/sonax-profiline-glass-detailer-concentrate-glasreinigerkonzentrat\"\u003eGlass Detailer Concentrate\u003c\/a\u003e, buffing back after glass prep — the Soft Touch is a solid pick for the first pass. For a dead streak-free final wipe on glass, though, reach for the dedicated \u003ca href=\"\/products\/sonax-profiline-microfasertuch-glas-mikrofasertuch\"\u003eMicrofaserTuch \"Glas\"\u003c\/a\u003e, built specifically for streak-free glass work. The Soft Touch is great for the main clean; the Glas cloth handles that last streak-free pass.\u003c\/p\u003e\n\n\u003cp\u003eFor applying sealant and wiping off spray sealants, the Soft Touch is the ideal removal cloth: soft enough to leave no streaks in fresh sealant, thirsty enough to soak up the excess fully. Wiping off a spray sealant detailer, a quick detailer or a wax leaves you with an even, streak-free result, no reworking needed.\u003c\/p\u003e\n\n\u003cp\u003eFor interior work the Soft Touch suits plastic surfaces and leather for streak-free removal of cleaner and dressing residue. It's the \"second cloth\" after the applicator: the \u003ca href=\"\/products\/sonax-profiline-innenraumschwamm-duo-applikationsschwamm\"\u003eInnenraumSchwamm \"Duo\"\u003c\/a\u003e lays the cleaner or dressing on; the Soft Touch wipes the residue off and leaves a clean, streak-free surface. That split is standard in pro outfits and saves time over using one cloth for both.\u003c\/p\u003e\n\n\u003ch3\u003eSoft Touch microfibre cloth in detailing — where it shines and its limits\u003c\/h3\u003e\n\n\u003cp\u003eThe Soft Touch covers the most common detailing jobs: wiping off polish residue, spreading sealant, wiping off glass cleaner, clearing interior dressing residue. That broad range makes it the central all-rounder in the kit — put another way, without a Soft Touch on hand, not much gets done day-to-day.\u003c\/p\u003e\n\n\u003cp\u003eIt's especially handy as a \"check cloth\" after each step. Once you've laid down a sealant spray, a quick detailer or a spray sealant, drag the cloth across the panel — the even drag and the look tell you straight away whether the layer went on full and even or whether it needs a touch-up. That instant feedback beats paper towels or household rags, which can't match it for even wipe-off.\u003c\/p\u003e\n\n\u003cp\u003eFor specific jobs the SONAX PROFILINE range has dedicated cloths. The \u003ca href=\"\/products\/sonax-profiline-coating-towel-mikrofasertuch\"\u003eCoating Towel\u003c\/a\u003e is built for wiping off ceramic coatings — the insert is designed to stop high spots in fresh ceramic layers. For that job, reach for the Coating Towel, not the Soft Touch. If you're laying on and wiping off a CC One, CC Pro or another ceramic sealant, you need the right cloth — the wrong cloth on a ceramic coating can damage the surface for good.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/products\/sonax-profiline-microfasertrockentuch-plus-mikrofasertuch\"\u003eMicrofaserTrockenTuch \"PLUS\"\u003c\/a\u003e is built for drying the car after the wash — big, super-thirsty, made for quickly drying whole panels. The Soft Touch can do it in a pinch, but it isn't ideal: it's smaller and not built for the mass water pickup drying after a wash demands. For detailers who dry after the wash and then go straight to polishing, both cloths belong in the kit.\u003c\/p\u003e\n\n\u003cp\u003eFor applying waxes and semi-solid sealants (paste wax, carnauba wax) the Soft Touch works as a removal cloth, but not as an applicator. For laying on paste wax, dedicated applicator sponges or pads with a dense structure do a better job, spreading the wax evenly and streak-free. The Soft Touch then takes the dried wax film off — and pulls up that signature deep gloss only a soft, thirsty cloth leaves on the paint.\u003c\/p\u003e\n\n\u003cp\u003eThe Soft Touch hits its limit on mechanically demanding jobs. For clearing dried polish residue worked into the panel gaps (badges, seams, rubber trim), a detailing brush is the better call. The Soft Touch can wipe such residue off once it's been loosened — but scraping it off itself isn't one of its strengths.\u003c\/p\u003e\n\n\u003ch3\u003eMicrofaserTuch \"Soft Touch\" compared — which cloth fits when\u003c\/h3\u003e\n\n\u003cp\u003eThe SONAX PROFILINE cloth range follows a clear logic of specialisation. The Soft Touch is the all-rounder for paint, plastic and general wipe-off jobs. The Glas cloth is the specialist for streak-free glass. The Coating Towel is the specialist for ceramic. The TrockenTuch PLUS is the specialist for fast car drying. All four have their clear lane, complement each other and don't replace one another.\u003c\/p\u003e\n\n\u003cp\u003eIf you want to start with just one cloth, the Soft Touch is your best bet: it covers most jobs and is the most flexible cloth in the range. As you get more serious, the Glas cloth for glass prep and the Coating Towel for sealant work come in — until the cloth set is fully ready for everything you throw at it.\u003c\/p\u003e\n\n\u003cp\u003eNext to ordinary household microfibre, the Soft Touch is higher grade in fibre structure, softer in the hand and longer-lasting in the wash. Household microfibre is often coarser and has a more aggressive surface that can put swirls into car paint. The price gap between cheap household microfibre and PROFILINE Soft Touch pays for itself fast once you reckon that one deeply scratched car means serious rework on the polisher.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the MicrofaserTuch \"Soft Touch\" — pack size and planning\u003c\/h3\u003e\n\n\u003cp\u003eThe call between the 3-pack and the 50-pack comes down to how much you use. For hobby detailers looking after their own car and the odd one for mates, the 3-pack lasts plenty of work cycles. One thing: wash microfibre cloths straight after each use — don't leave them piling up until the whole stock is spent. Freshly washed cloths grab far better than ones used over and over with product residue in them. Pros sort their Soft Touch cloths by job — one set just for polishing, one for sealant wipe-off, one for interior work. Colour-coding them (say, with coloured tags) stops product cross-contamination and makes it clear at a glance which cloth is ready for which job mid-job.\u003c\/p\u003e\n\n\u003cp\u003eThe 50-pack is the economical call for outfits doing several cars a day. The much lower price per cloth makes the big set the standard choice for pro work. A well-run detailing outfit always has plenty of fresh, washed cloths on hand — the Soft Touch in the 50-pack builds that reserve without constant reordering.\u003c\/p\u003e\n\n\u003cp\u003eIf you're after the ideal first microfibre cloth for getting into proper car care, the Soft Touch is the best starting point. It's versatile enough to handle most detailing situations, cheap enough to keep a few in reserve, and good enough to use without a second thought on delicate car paint and glass. The price per cloth in the 50-pack sits well below many single cloths on the market — with the quality assurance that comes with SONAX PROFILINE standards.\u003c\/p\u003e\n\n\u003cp\u003eFor outfits that also offer ceramic coatings, build a full cloth set with the Soft Touch as the base supply and the \u003ca href=\"\/products\/sonax-profiline-coating-towel-mikrofasertuch\"\u003eCoating Towel\u003c\/a\u003e for coating work. Spending on the right cloth for each job is the cheapest form of mistake prevention in pro detailing — because a damaged car always costs more than the cloth that could have stopped the damage. The SONAX PROFILINE MicrofaserTuch \"Soft Touch\" sits at the heart of any cloth set: flexible enough for most jobs, good enough for demanding surfaces, and economical enough to keep in numbers — that's what makes an all-rounder in pro detailing.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"3 pieces","offer_id":57345158873423,"sku":"D1-SNX-4510000","price":22.49,"currency_code":"EUR","in_stock":false},{"title":"50 pieces","offer_id":57345158906191,"sku":"D1-SNX-4513000","price":133.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-microfasertuch-soft-touch_3-stueck.png?v=1774736638"}],"url":"https:\/\/detiiling1.com\/collections\/sonax-mikrofasertuch.oembed","provider":"Detailing1","version":"1.0","type":"link"}