{"title":"Wall mounts","description":"\u003ch2 id=\"speakable-headline\"\u003eWall mounts give bottles, machine and pads a fixed home\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat are wall mounts in car care? Fixed holders that put bottles, spray bottles, brushes, your polisher, polishing pads, disposable gloves or the air blower within reach on the wall. They organise the kit for the job in hand. They're not a store for canisters, and how much they hold is down to the wall.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eWall mounts\u003c\/strong\u003e are holders screwed firmly to the wall at your detailing spot, each one built for a specific item: bottles and brushes, spray bottles, pressure sprayers, polisher, polishing pads, glove boxes or the air blower. The only thing they share with a TV bracket is the name. Their job is to shorten your reach. Every item hangs where you need it while you work and goes back to the same spot afterwards. People also search for them as tool holders or equipment racks — here they're tailored to car care.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions, not promises.\u003c\/strong\u003e Koch-Chemie gives fixed limits for the key holders: bottles up to 9 cm in diameter, polishing pads up to 150 mm, polishers with a backing plate up to 180 mm. With those three numbers and a tape measure you can check the basic sizes before you buy — for polishers, check the head shape as well.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne material for the whole wall.\u003c\/strong\u003e Koch-Chemie's holders are made from galvanised, powder-coated sheet steel, 1.5 mm thick; the pressure sprayer holder is 2 mm. Galvanised means zinc-plated: a zinc layer under the powder coat keeps rust off the metal. In practice, a splash of cleaner on the wall stays a quick wipe with a towel rather than turning into a brown stain.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpace you can plan in centimetres.\u003c\/strong\u003e The Trigger Holder is 40 cm long and takes about five spray bottles. The Bottle \u0026amp; Brush Holder stands five bottles side by side, with six hooks for brushes underneath. That way you lay out the wall in advance instead of re-hanging everything after drilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e We think the order on the wall matters more than any single holder. Before you drill the first hole, lay everything out on the floor in the order you reach for it while working: gloves, chemicals, machine, pads, dryer. Check the door swing, the cable run to the socket and the grab height while you're at it, and allow 40 cm of wall width for the Trigger Holder. Only once that dry run works do you mark the drill holes.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eA wall mount is for staging, not for storing chemicals\u003c\/h3\u003e\n\u003cp\u003eA wall mount holds an item you reach for again and again while you work and keeps it within reach on the wall instead of on the floor, the workbench or the bonnet. Without a fixed spot, a tool ends up wherever it causes the next mistake: the pad drops in the dust, the machine dangles by its cable over the edge of the bench, the box of gloves sits in the puddle under the car.\u003c\/p\u003e\n\u003cp\u003eWhat matters is the holder's role. A bottle holder on the wall is for staging the job at hand, not for storing chemicals. That's where the spray bottles and concentrates you're working with today live. Canisters and refill stock belong on a shelf with a drip tray that holds at least the largest container. That way a leaking canister stays a stain in the tray instead of becoming a puddle under the wall.\u003c\/p\u003e\n\u003cp\u003eHolders don't belong in walkways or door areas. A machine hanging at hip height next to the door will catch your jacket as you walk past, and a row of bottles above the doorway drips onto the path you take all the time. Hang the holders where you work, not where you walk. The floor stays clear, and nothing's in the way when you manoeuvre the car.\u003c\/p\u003e\n\u003cp\u003eWithin \u003ca href=\"\/collections\/werkstatteinrichtung\"\u003eWorkshop equipment\u003c\/a\u003e, wall mounts are the fixed part. They stay where they're mounted and hold whatever gets used constantly at the detailing spot. Pressure washers, lifting gear and lighting are handled on the parent page. Here it's about the small items that otherwise end up lying everywhere and go missing at the crucial moment.\u003c\/p\u003e\n\n\u003ch3\u003eEvery holder is built for a specific shape\u003c\/h3\u003e\n\u003cp\u003eWall mounts differ by the item they hold, and a holder for bottles, spray bottles, pressure sprayers, machines, pads, gloves or dryers is shaped differently each time. A tool wall mount with hooks, on the other hand, takes anything with a handle and doesn't organise anything by shape.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/koch-chemie-bottle-brush-holder-flaschen-pinselhalterung\"\u003eKoch-Chemie Bottle \u0026amp; Brush Holder\u003c\/a\u003e is a bottle holder with a shelf: five bottles up to 9 cm in diameter stand side by side, and six hooks underneath take brushes and accessories. That puts your \u003ca href=\"\/collections\/detailing-pinsel\"\u003eDetailing brush\u003c\/a\u003e collection right below the cleaners you use them with. Measure your widest bottle before you buy, because anything thicker than 9 cm won't fit in the holder.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/koch-chemie-trigger-holder-halterung-fuer-5-spruhflaschen\"\u003eKoch-Chemie Trigger Holder\u003c\/a\u003e is the spray bottle holder in the range. It hangs bottles up in a space-saving way, with room for about five across its 40 cm length. Koch-Chemie doesn't say which bottle sizes fit. If you mainly use large \u003ca href=\"\/collections\/spruehflasche\"\u003eSpray bottles\u003c\/a\u003e, ask us before you buy rather than finding out on the wall.\u003c\/p\u003e\n\u003cp\u003eFor pressure sprayers — pump bottles you pressurise before spraying — Koch-Chemie offers a dedicated holder: 23 cm long, made from 2 mm sheet steel, for two units. That way your \u003ca href=\"\/collections\/druckpumpzerstaeuber\"\u003ePressure pump atomizer\u003c\/a\u003e hangs right next to the row of bottles. If you apply pre-cleaner or bug remover from a pressure sprayer, you've got both units within reach and don't have to pick them up off the floor.\u003c\/p\u003e\n\u003cp\u003eThe other four holders have their own pages with detailed advice. \u003ca href=\"\/collections\/pad-spender\"\u003ePad dispensers\u003c\/a\u003e stack polishing pads, release them at the bottom and should only take pads that are completely dry. \u003ca href=\"\/collections\/handschuhspender\"\u003eGlove dispensers\u003c\/a\u003e hold the glove box where you change gloves. \u003ca href=\"\/collections\/poliermaschinenhalter\"\u003ePolisher holders\u003c\/a\u003e give the machine a spot where it doesn't hang by its cable, and \u003ca href=\"\/collections\/geblaesetrockner-halter\"\u003eAir blower holders\u003c\/a\u003e are available to fit the bigboi BlowR Mini and Mini+.\u003c\/p\u003e\n\n\u003ch3\u003eFit comes before load capacity\u003c\/h3\u003e\n\u003cp\u003eWhether a wall mount is any good depends first on fit: the holder has to match the diameter of your bottle, your pad or the head shape of your machine. Only then does the question of what the wall can hold come up.\u003c\/p\u003e\n\u003cp\u003eWith polishers, backing plate diameter alone isn't enough. On detailing forums, users report that some compact machines can't be hung securely in typical polisher holders because of their head shape, and end up hanging by the backing plate — the disc the pad sits on. Users solved it with home-made rests. So before you buy, check how your machine is shaped behind the head, not just the plate.\u003c\/p\u003e\n\u003cp\u003eThat's why Koch-Chemie's polisher holder has side cut-outs for small machines next to the main cradle. They don't replace a look at your own machine, but they show that one holder can cover more than one size. The detailed question of which machine fits which holder belongs on the polisher holder page.\u003c\/p\u003e\n\u003cp\u003eWith bottles, pads and gloves, checking is easier. Put your biggest pad against the tape measure, measure your widest bottle and look at the glove box you actually buy. For the glove dispenser, Koch-Chemie doesn't give a measurement, just room for nearly all common disposable glove packs. If you use bulk packs or unusual formats, hold your box up against the product photos first or ask us.\u003c\/p\u003e\n\u003cp\u003eThere are two material options. Koch-Chemie's holders are sheet steel; other manufacturers also make polisher holders from lightweight plastic. For a wall that gets splashed with cleaner and polish residue, the wipe-clean powder coat makes sense; plastic wins on weight. Either design only holds if the fixing is right.\u003c\/p\u003e\n\n\u003ch3\u003eThe wall sets the limit, not the holder\u003c\/h3\u003e\n\u003cp\u003eA wall mount only holds as much as the wall plugs and the wall itself can take, and since none of these holders' manufacturers states a load rating, your wall ultimately decides how much it can carry. That applies to Koch-Chemie just as much as to the other brands we checked.\u003c\/p\u003e\n\u003cp\u003eWall plug manufacturer fischer ranks the substrates clearly: concrete holds best, followed by solid brick. Perforated brick and aerated concrete (also known as aircrete) need special plugs above 30 kg. For an unknown substrate and loads over 10 kg, fischer recommends plugs from 10 mm diameter and 60 to 80 mm length. The maximum load is in the plug's load table, not on the holder.\u003c\/p\u003e\n\u003cp\u003eOn plasterboard over a stud frame, only plugs made for board materials will hold — cavity fixings that expand behind the board, for example. For a polisher or a full row of bottles, you're better off screwing the holder into a stud or first fitting a wooden board across several studs. The weight then spreads over lots of screws instead of two plugs in a thin board.\u003c\/p\u003e\n\u003cp\u003eNot every holder comes with fixings. For the Bottle \u0026amp; Brush Holder and the Pad Dispenser, Koch-Chemie states explicitly that they're not included; for the other Koch-Chemie holders there's no information. So buy wall plugs that suit your wall. Even if there are screws in the box, they're not meant for every substrate.\u003c\/p\u003e\n\u003cp\u003eWhen hanging up the machine: unplug it or take the battery out. FLEX's manual says to pull the mains plug before any work on the polisher, and forum posts mention a mini polisher that can switch on while being hung up because its switch sits under the bracket. Never hang the machine by its cable. The Koch-Chemie holder has a cut-out at the bottom for the cable to sit in.\u003c\/p\u003e\n\n\u003ch3\u003eKoch-Chemie builds its holders as a uniform metal system\u003c\/h3\u003e\n\u003cp\u003eThe core of the range is Koch-Chemie's shop equipment: holders in a uniform design and made from the same powder-coated metal, which come together on a wall into one clean look. You'll find all Koch-Chemie holders together under \u003ca href=\"\/collections\/koch-chemie-werkstatteinrichtung\"\u003eDetailing bay equipment by Koch-Chemie\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Trigger Holder and the Bottle \u0026amp; Brush Holder make a good starting point, because they organise the items you pick up on every wash and every detail. In our orders, the Trigger Holder turns up alongside 1-litre cylinder bottles, trigger heads and the Green Star all-purpose cleaner, and the bottle holder alongside brush sets. So the wall grows out of what's already in use, not out of a catalogue.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/koch-chemie-pad-dispenser-spender-fuer-polierpads-150mm\"\u003eKoch-Chemie Pad Dispenser\u003c\/a\u003e bridges the gap to the polishing station. Koch-Chemie designed it for its own polishing pads up to 150 mm, and pads come out at the bottom. Together with the \u003ca href=\"\/products\/koch-chemie-polisher-holder-halterung-fuer-poliermaschinen-180mm\"\u003eKoch-Chemie Polisher Holder\u003c\/a\u003e, machine and pads hang side by side. Switching between cut and finish — from the cutting pad for correction to the soft one for gloss — then happens without any hunting around.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/koch-chemie-glove-dispenser-spender-einweghandschuhe\"\u003eKoch-Chemie Glove Dispenser\u003c\/a\u003e has a generous cut-out at the front centre. You pull out the next glove one-handed, even when you're already wearing gloves. It goes at the start of the row, where you put on and change gloves before reaching for the chemicals.\u003c\/p\u003e\n\u003cp\u003eFor the \u003ca href=\"\/collections\/geblaesetrockner\"\u003eAir blower\u003c\/a\u003e, the holder comes from the device maker itself: bigboi offers its own wall bracket for the BlowR Mini and Mini+, and according to bigboi the screws are included. The unit then hangs upright on the wall instead of standing on the floor. Which BlowR model needs which holder is covered on the air blower holder page.\u003c\/p\u003e\n\n\u003ch3\u003eA hook holds the machine, but it won't sort your pads\u003c\/h3\u003e\n\u003cp\u003eWhether a dedicated holder is worth it depends on whether the item's shape matters: for tools with a handle, a pegboard with hooks is enough; for pads, spray bottles and gloves, it isn't.\u003c\/p\u003e\n\u003cp\u003eA pegboard with hooks is cheap and can be rearranged at any time. A scraper, a brush or a machine with a handle just hooks straight on. What a hook can't do: keep pads dry and sorted by size, hold a glove box steady for one-handed grabbing, or hang a row of spray bottles so you can grab each one individually. That's where the dedicated holder earns its premium.\u003c\/p\u003e\n\u003cp\u003eBuilding your own is the third option. On detailing forums, users show off wooden rails and home-made hangers for machines that don't fit any off-the-shelf holder. That's worth it for an unusual machine or a wall where no standard holder will sit. For bottles, pads and gloves, a ready-made holder is usually up quicker than a DIY solution can be built, and all you need to check is dimensions and wall plugs.\u003c\/p\u003e\n\u003cp\u003eThe second question is location. If you work at a fixed spot, the wall gives you the shortest reach. If you move around the car or work at customers' places, you'll also need a mobile setup — a trolley, a case or a bag from \u003ca href=\"\/collections\/aufbewahrung\"\u003eStorage\u003c\/a\u003e. The two aren't mutually exclusive. The wall holds what stays at your spot, and only what you need at the car travels with you.\u003c\/p\u003e\n\u003cp\u003eThe bottles in the holder are working stock, not winter storage. Koch-Chemie advises protecting care products from frost and excessive heat, and in an unheated garage the temperature can drop below zero in winter. Take the bottles down before the first frost and keep them somewhere frost-free. The holder stays on the wall, and in spring every bottle goes back to its spot.\u003c\/p\u003e","products":[{"product_id":"koch-chemie-trigger-holder-halterung-fuer-5-spruhflaschen","title":"Trigger Holder rack for 5x spray bottles","description":"\u003cdiv class=\"mb-2\"\u003e\n\u003cdiv class=\"product-information-collapse show\" id=\"js-product-information\"\u003e\u003cspan\u003eShop equipment doesn't just keep your products tidy so you work faster — it also lifts the look of your detailing setup with a clean, consistent KCX style. The Trigger Holder lets you hang up spray bottles and save bench space. At 40cm long it takes about 5 spray bottles. It's made from 1.5 mm galvanised, powder-coated metal.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"mt-1 text-center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Koch-Chemie","offers":[{"title":"40cm","offer_id":48818163876175,"sku":"D1-KCX-9998222","price":22.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998222_1_01d8e7d2-97c5-4bc0-92ad-927ff739ab83.png?v=1778249402"},{"product_id":"koch-chemie-polisher-holder-halterung-fuer-poliermaschinen-180mm","title":"Polisher Holder for polishing machines up to 180mm","description":"\u003cdiv class=\"mb-2\"\u003e\n\u003cdiv class=\"product-information-collapse show\" id=\"js-product-information\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003eWith the Shop Equipment you don't just keep your products neatly organised and work more efficiently — you also give your own detailing a modern, consistent KCX look. The Polisher Holder lets you hang up your polishers without eating shelf space. The cut-out along the bottom of the Polisher Holder keeps your cables tucked away. It fits dual-action and rotary polishers with a backing plate up to 180 mm \/ 7 inch, and the side cut-outs take smaller polishers. The whole thing is made from 1.5 mm thick galvanised, powder-coated metal.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Koch-Chemie","offers":[{"title":"Default Title","offer_id":48818204377423,"sku":"D1-KCX-9998219","price":72.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998219_1.png?v=1778249404"},{"product_id":"koch-chemie-pad-dispenser-spender-fuer-polierpads-150mm","title":"Pad Dispenser dispenser for polishing pads up to 150mm","description":"\u003cdiv class=\"mb-2\"\u003e\n\u003cdiv class=\"product-information-collapse show\" id=\"js-product-information\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"mb-2\"\u003e\n\u003cdiv class=\"product-information-collapse show\" id=\"js-product-information\"\u003e\u003cspan\u003eWith this shop equipment you don't just keep your products organised and work more efficiently — you also give your own detailing setup a clean, consistent KCX look. The Pad Dispenser is built for our polishing pads up to 150 mm\/6 inch across. Pulling a pad out is easy thanks to the handy cut-out at the bottom of the dispenser. It's made from 1.5 mm galvanised, powder-coated metal.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Koch-Chemie","offers":[{"title":"Default Title","offer_id":48818231673167,"sku":"D1-KCX-9998218","price":97.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998218_1.png?v=1778249406"},{"product_id":"koch-chemie-glove-dispenser-spender-einweghandschuhe","title":"Glove Dispenser Holder for Disposable Gloves","description":"\u003ch2\u003eOrder on the bench wall — glove dispenser in KCX design by Koch-Chemie\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is a glove dispenser for the shop? A wall-mounted glove dispenser keeps disposable gloves within reach right at your station — for quick, hygienic grabbing, no rooting through a drawer. The Koch-Chemie Glove Dispenser is made from powder-coated metal and fits nearly every common disposable-glove box out there.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIf you detail regularly, you know the drill: the gloves end up somewhere on the bench, spill out of the box, vanish under a pile of microfibres — and right when your hands are covered in polish, the next glove is nowhere to be found. The \u003cstrong\u003eglove dispenser\u003c\/strong\u003e from Koch-Chemie fixes exactly that. Mounted straight onto the wall of your detailing station, it keeps your disposable gloves right where you need them: clean, accessible, ready to grab. It's part of the KCX shop-equipment system — built for pros and serious hobby detailers who want a tidy, consistent work area.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal fit with almost any glove box.\u003c\/strong\u003e The cut-out in the centre of the front is deliberately generous, so you can pull a glove with one hand — even with gloves already on. That keeps you from breaking off mid-job and keeps your workflow flowing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolid metal build for daily use.\u003c\/strong\u003e The dispenser is made from 1.5 mm galvanised, powder-coated metal. Translation: no bending, no yellowing, no wobbly plastic bracket after six months. In a shop where chemicals, moisture and knocks meet every single day, that makes a real difference.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart of the unified KCX design system.\u003c\/strong\u003e For anyone kitting out their detailing station with Koch-Chemie gear top to bottom: the Glove Dispenser matches the rest of the KCX shop equipment. A tidy, professional-looking shop isn't a luxury — it cuts down on hunting around, prevents mistakes, and makes a difference when customers see the station.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWall glove holder — why where you mount it matters\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003ewall-mounted glove holder\u003c\/strong\u003e sounds like a small thing at first. Day-to-day, though, it's what separates a properly organised detailing station from a bench you've cobbled together. If you work with polishes, sealants or cleaners regularly — say the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-copo-star-cs-werkstattboden-industriereiniger\"\u003eKoch-Chemie Copo Star shop-floor cleaner\u003c\/a\u003e or \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-green-star-96-gs9-universalreiniger\"\u003eGreen Star 96 all-purpose cleaner\u003c\/a\u003e — you pull on fresh gloves several times a day on average. Every second of searching adds up. A fixed, visible wall spot for the glove box means: no crushed boxes, no gloves on the floor, no contamination risk from grabbing with bare hands. The Koch-Chemie Glove Dispenser is designed to fix to the wall with standard wall plugs and sit flat against it — it barely sticks out and won't get in the way of how you move around the station.\u003c\/p\u003e\n\u003cp\u003eFor you, that means you can mount the dispenser exactly where reaching for a fresh glove feels most natural — next to the polishing cart, above the cleaner shelf, or at the entrance to the work bay. Pulling a glove still works cleanly when you've already got one on, since the centre cut-out is wide enough to reach into the box without any fiddly precision.\u003c\/p\u003e\n\n\u003ch3\u003eGlove box holder — compatibility in everyday use\u003c\/h3\u003e\n\u003cp\u003eA common gripe with cheap \u003cstrong\u003eglove box holders\u003c\/strong\u003e is the lack of universal fit: some boxes are too wide, too narrow, sit too loose, or fall out when you pull a glove. Koch-Chemie went a different way with the Glove Dispenser. The holder is built around the most common box sizes for disposable gloves (100-count and 200-count boxes). The open front with no latch is an advantage here, not a drawback: you drop the box in, it sits secure, and you pull gloves straight through the cut-out — no need to lift the box out of the holder first. With dirty hands, that's a genuine comfort win. Day-to-day it means: hang it once, forget it — the box stays put until it's empty.\u003c\/p\u003e\n\u003cp\u003eIf you run different glove types in the shop (nitrile and latex in various sizes, say), you can mount several dispensers side by side, no problem. The compact shape makes that doable without covering the whole wall.\u003c\/p\u003e\n\n\u003ch3\u003eDetailing shop setup — the KCX system for professional detailers\u003c\/h3\u003e\n\u003cp\u003eThe Glove Dispenser isn't meant as a one-off — it's part of a well-thought-out \u003cstrong\u003edetailing shop setup\u003c\/strong\u003e. With the KCX shop equipment, Koch-Chemie built a line aimed at what professional detailers actually need: solid materials, clean design, straight-up function with no frills. That 1.5 mm galvanised metal isn't a random pick — it stands up to splashes from cleaners and sealants without corroding or losing its coating. If you already use \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-masking-tape-rueckstandsfreies-klebeband-50m\"\u003eKoch-Chemie Masking Tape\u003c\/a\u003e for clean masking or the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-auslaufhahn-koch-chemie-kanister\"\u003eKoch-Chemie canister tap\u003c\/a\u003e for tidy dosing, you know what the brand is about: kit that just works day-to-day, no thinking required.\u003c\/p\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e We'd mount the Glove Dispenser at hip height — not too high, not too low. That way grabbing a glove stays ergonomic even when you've got an applicator in your hand and have to nudge the box down with your elbow. Run several dispensers for different glove sizes right next to each other, so everyone reaches straight for the right glove.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eStainless steel or metal glove dispenser — differences and alternatives\u003c\/h3\u003e\n\u003cp\u003eOut there you'll find \u003cstrong\u003estainless steel glove dispensers\u003c\/strong\u003e, acrylic, plastic and — like this one — powder-coated steel. What's the difference? Stainless models from the medical and hygiene world (MaiMed or TEQLER, for instance) are built for sterile environments and designed to match: high-gloss polish, often with a spring mechanism for clean pulling. In a detailing context those features are secondary. What counts here is standing up to chemical splashes, pulling a glove fast even without fiddly precision, and looking the part next to the rest of your shop setup. Cheap plastic holders from the hardware store often warp and sit loose on the wall after a few months. The Koch-Chemie Glove Dispenser costs more than basic plastic models — but gives you far more rigidity in return and fits the look of a properly kitted-out detailing station. If all you want is the cheapest possible place to stash gloves and looks don't matter, the chemist and hardware aisle has cheaper options. If you're after a long-term, sturdy, consistently designed shop, this is the one.\u003c\/p\u003e\n\n\u003ch3\u003eKoch-Chemie KCX design — who's the Glove Dispenser right for?\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie Glove Dispenser is aimed first at detailers who want to set up their station for the long haul — not just a one-time job. Shops detailing several cars a day get the most out of it: reaching for a glove becomes second nature, no hunting, no hassle. For hobby detailers who only work occasionally and keep their gloves in a drawer anyway, the dispenser is less of a must — but once you've worked with a fixed wall dispenser, you won't want to go back. It pairs especially well with other Koch-Chemie KCX products if you're building out a consistent station. The \u003cstrong\u003eKCX design\u003c\/strong\u003e, with its clean metal look, slots into pro and semi-pro detailing setups alike. Bottom line: if you detail regularly, pull on gloves every day, and care about a tidy station — the Glove Dispenser is a sensible, long-lasting investment in your daily work.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"Default Title","offer_id":48818296848719,"sku":"D1-KCX-9998221","price":38.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998221_1.png?v=1778249410"},{"product_id":"koch-chemie-bottle-brush-holder-flaschen-pinselhalterung","title":"Bottle \u0026 Brush Holder — mount for 5x bottles \u0026 brushes","description":"\u003cdiv class=\"mb-2\"\u003e\n\u003cdiv id=\"js-product-information\" class=\"product-information-collapse show\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"mb-2\"\u003e\n\u003cdiv id=\"js-product-information\" class=\"product-information-collapse show\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"mb-2\"\u003e\n\u003cdiv id=\"js-product-information\" class=\"product-information-collapse show\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003eWith this Shop Equipment you don't just keep your products tidy and work more efficiently — you also give your detailing setup a clean, consistent KCX look. The Bottle Holder takes 5 bottles up to 9 cm in diameter. Underneath sit 6 hooks for hanging accessories like brushes. It's built from 1.5 mm thick galvanised, powder-coated metal.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Koch-Chemie","offers":[{"title":"Default Title","offer_id":48818307432783,"sku":"D1-KCX-9998220","price":77.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998220_1.png?v=1778249412"},{"product_id":"bigboi-wandhalterung-blowr-mini-mini-plus-blowr-zubehoer","title":"Wall mount for \"BlowR Mini \u0026 Mini+\"","description":"\u003c!----\u003e","brand":"bigboi","offers":[{"title":"BlowR Mini \u0026 Mini+","offer_id":48983389110607,"sku":"D1-BIB-04092","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/Accesories-74.jpg?v=1715164943"},{"product_id":"bigboi-wandhalterung-blowr-pro-pro-plus-lacktrockner-zubehoer","title":"Wall mount for \"BlowR Pro \u0026 Pro+\"","description":"\u003c!----\u003e","brand":"bigboi","offers":[{"title":"BlowR Pro \u0026 Pro+","offer_id":48983088562511,"sku":"D1-BIB-WALLMOUNTPRO","price":59.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/All_elements-71.jpg?v=1715164948"},{"product_id":"flex-whp-wandhalter-haken","title":"\"WHP\" Wall Mounts \u0026 Hooks","description":"\u003ch2\u003eFLEX WHP Wall Mount and Hooks — Professional Wall Mounting Solution for FLEX Battery Packs, Chargers, and Cables\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is the FLEX WHP Wall Mount \u0026amp; Hook System? The FLEX WHP is a modular wall mounting accessory for FLEX battery packs, chargers, and cables — consisting of the WHP-2 AC\/DC double wall mount, the WHP-1 AC\/DC single wall mount, and the Battery Hook and Cable Hook as individual hooks for flexible expansion.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eOrder in the workshop is not a question of space — it's a question of the right mounts. The \u003cstrong\u003eFLEX WHP Wall Mount \u0026amp; Hook System\u003c\/strong\u003e brings the battery management of a professional detailing workshop to the wall: battery packs, chargers, and cables mounted within reach, neatly organized, always accessible — without searching on the workbench or reaching into overcrowded drawers.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX WHP System\u003c\/strong\u003e consists of four components for different mounting needs: The WHP-2 AC\/DC is the double wall mount for simultaneous charging and storage of two battery packs (SKU 530882, €129.71). The WHP-1 AC\/DC is the single version for more compact wall installations (SKU 530883, €70.21). The Battery Hook (SKU 530720, €10.71) is a simple hook attachment for individual battery packs without charging function. The Cable Hook (SKU 530721, €9.52) is the compact cable organizer for charging cables, extension cords, and accessory cables.\u003c\/p\u003e\n\u003cp\u003eAs an accessory to the FLEX 18V\/12V battery system, the \u003cstrong\u003eFLEX WHP Wall Mount System\u003c\/strong\u003e complements the \u003ca href=\"\/products\/flex-p-set-22-q-akku-set-18v\"\u003eFLEX battery packs\u003c\/a\u003e and \u003ca href=\"\/products\/flex-p-set-55-r-akku-set-18v\"\u003echargers\u003c\/a\u003e with a sensible storage infrastructure. Anyone who uses several FLEX battery packs knows: Without a fixed charging station and storage location, batteries lie on the workbench, are forgotten to be charged, or get lost in the tool chaos. The WHP System solves this problem structurally.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWHP-2 and WHP-1 AC\/DC Wall Mounts — Charge and store battery packs in one wall mount.\u003c\/strong\u003e The AC\/DC designation of the WHP wall mounts describes the dual function: Battery packs can be hung up and simultaneously charged via the integrated power connection — no separate removal for charging, no cable clutter on the workbench. The battery packs are always within reach and always charged. The WHP-2 holds two battery packs simultaneously, the WHP-1 holds one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Hook and Cable Hook as individual hooks — modular expansion for flexible wall management.\u003c\/strong\u003e The Battery Hook (€10.71) and Cable Hook (€9.52) are the most affordable entry points into the FLEX WHP System. They expand an existing WHP installation with additional hanging points for battery packs without a charging function and for cables. For workshops that already have WHP-1 or WHP-2 mounts and want to add individual expansion points, these individual hooks are the most economical option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting for FLEX 18V and 12V battery system — compatible with the entire FLEX battery range.\u003c\/strong\u003e The WHP System is designed for the FLEX battery packs of the 18V and 12V line — the holding systems securely accommodate the FLEX standard batteries. No wobbling, no improvised mounting, no compatibility uncertainty. Anyone who uses FLEX cordless tools and FLEX battery packs has a directly fitting storage solution with the WHP System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Make the most effective use of the FLEX WHP System: Mount the WHP-2 AC\/DC next to the polishing table — a battery charging on the left, the charged battery for the next use on the right. Mount Battery Hooks and Cable Hooks in the immediate vicinity of the tools, not separately. If you open the workshop in the morning and see all batteries fully charged in their holders, you save the daily search for charged batteries — and start every work session without the risk of interruption due to weak batteries. The investment in the WHP System pays for itself through saved time faster than you think.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eWHP-2 AC\/DC — the double wall mount with integrated charging function\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX WHP-2 AC\/DC wall mount\u003c\/strong\u003e is the most comprehensive component of the FLEX WHP System and the most important for workshops with intensive battery use. The double mount enables simultaneous charging and storage of two FLEX battery packs — both batteries charging at the same time, no waiting for the first before the second is charged.\u003c\/p\u003e\n\u003cp\u003eThe AC\/DC charging function means: The WHP-2 is directly connected to the power grid and charges the hung battery packs fully automatically. No separate charger to take out, no cables to connect, no manual charging process — hang up the battery, done. This is the solution for workshops that don't have time for explicit charge management between two polishing sessions.\u003c\/p\u003e\n\u003cp\u003eMounting the WHP-2 on the wall is easy: provided standard screws and suitable mounting material are used. The holder sits firmly and securely supports the weight of two fully charged FLEX battery packs. For optimal positioning, we recommend mounting the WHP-2 in the direct field of vision of the main workstation — so the charging status of both batteries can be checked at a glance at any time.\u003c\/p\u003e\n\u003cp\u003eThe price of the WHP-2 (€129.71) reflects the integrated charging function and dual capacity. Compared to a separate charger plus improvised hangers, the WHP-2 is the more elegant, space-saving, and long-term more economical solution — no cable clutter, no loose batteries on the workbench, no faulty non-charging because the charger is currently in use elsewhere.\u003c\/p\u003e\n\u003ch3\u003eBattery Hook and Cable Hook — modular expansion with minimal investment\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX Battery Hook\u003c\/strong\u003e (€10.71) and the \u003cstrong\u003eFLEX Cable Hook\u003c\/strong\u003e (€9.52) are the most affordable entry points into the FLEX WHP wall hook system. Both hooks are designed for wall mounting and allow for the organized hanging of FLEX battery packs or cables, without the integrated charging function of the WHP-1 and WHP-2 mounts.\u003c\/p\u003e\n\u003cp\u003eThe Battery Hook is the solution for anyone who wants to have battery packs within reach on the wall, without a simultaneous charging function. This is useful for reserve battery packs that are only occasionally changed, or for secondary locations within the workshop where no power connection for charging is available. As an addition to a WHP-1 or WHP-2, the Battery Hook expands the capacity of the wall system with an additional battery storage space at a fraction of the WHP costs.\u003c\/p\u003e\n\u003cp\u003eThe Cable Hook solves the ubiquitous cable clutter in the detailing workshop: charging cables, extension cords, power supplies, and USB cables hang neatly on the wall instead of tangled in drawers or loose on the table. The investment of under 10 euros per hook makes it economically sensible to mount several Cable Hooks for different cable types. Order in cable management saves time daily and protects cables from kinking and abrasion damage due to improper storage.\u003c\/p\u003e\n\u003ch3\u003eWHP Mounting and Workshop Planning — Optimal Positioning for Maximum Efficiency\u003c\/h3\u003e\n\u003cp\u003eThe right positioning of the \u003cstrong\u003eFLEX WHP wall mounts\u003c\/strong\u003e in the workshop makes the difference between a system that is used daily and one that is ignored after a short time. Wall mounts that are too far from the workstation are rarely used — batteries end up back on the table. Wall mounts installed directly at the polishing station become an automatic habit.\u003c\/p\u003e\n\u003cp\u003eOur recommendation for optimal positioning: Mount the WHP-2 or WHP-1 with charging function at grip height (approx. 130–140cm above the floor), directly next to or opposite the primary \u003ca href=\"\/products\/flex-xfe21518ec-15mm-akku-exzenterpolierer-freilauf-150mm-18v\"\u003eFLEX eccentric polisher\u003c\/a\u003e workstation. This makes battery changes a one-second movement — remove battery, plug in machine, continue working. The fully charged spare battery hangs directly next to it and is immediately ready for use.\u003c\/p\u003e\n\u003cp\u003eBattery Hooks and Cable Hooks should be mounted in close proximity to the devices for which they are intended. Cable hooks directly above the workbench or charging station — cables always where they are needed. Battery Hooks for spare batteries in a second row above the AC\/DC main holders — all batteries at a glance, no searching. A well-thought-out WHP installation costs planning time once and saves many small moments of frustration daily.\u003c\/p\u003e\n\n\u003ch3\u003eWHP Wall Mounts in Comparison — FLEX System vs. Generic Storage Solutions\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX WHP Wall Mount \u0026amp; Hook System\u003c\/strong\u003e is not the only way to attach battery packs to the wall — but it is the only one designed specifically for FLEX battery packs. The comparison with generic storage solutions shows the differences.\u003c\/p\u003e\n\u003cp\u003eGeneric wall mounts or self-constructed solutions rarely fit perfectly to the specific geometry of FLEX battery packs. The result is wobbling attachments, scratches on the battery housings due to ill-fitting mounts, and the risk of batteries falling down if the mount gives way under load. The WHP Battery Hook is manufactured for the exact FLEX battery geometry and holds the batteries form-fittingly without wobbling and without the risk of scratches.\u003c\/p\u003e\n\u003cp\u003eThe AC\/DC charging function of the WHP-1 and WHP-2 holders cannot be replicated with any generic solution — here, the WHP System is unique in the FLEX battery range. Anyone who wants to use this convenience has no alternative to the WHP-1 or WHP-2.\u003c\/p\u003e\n\u003ch3\u003eBuy FLEX WHP — Which Combination is Right for Your Workshop?\u003c\/h3\u003e\n\u003cp\u003eThe selection from the \u003cstrong\u003eFLEX WHP Wall Mount \u0026amp; Hook System\u003c\/strong\u003e depends on battery usage and workshop size. For the typical professional detailer with two to four FLEX battery packs in use, we recommend as a basic setup: one WHP-2 AC\/DC for the primary work packs (charging and storage), supplemented by two to three Battery Hooks for reserve batteries and two to three Cable Hooks for cable management. This configuration covers typical workshop needs and costs significantly less than a completely newly planned shelving system.\u003c\/p\u003e\n\u003cp\u003eFor smaller installations, the WHP-1 AC\/DC (€70.21) is the economical entry point: one battery pack always charged and within reach, wall mounting with minimal effort. Those who start with a basic installation and expand the system as needed will find the Battery Hooks and Cable Hooks to be affordable expansion components. The WHP System is modular — you start with the essentials and add as needed.\u003c\/p\u003e\n\u003cp\u003eAll WHP components are combinable and designed for the same wall mounting system. Anyone who starts with WHP-1 today and later upgrades to WHP-2 can continue to use the WHP-1 as an expansion holder at another wall location. The FLEX WHP System grows with the workshop — without replacing existing components, without compatibility problems.\u003c\/p\u003e\n\u003cp\u003eFor newcomers to the FLEX battery system, we recommend ordering a WHP-1 or WHP-2 directly when purchasing the first FLEX battery set (\u003ca href=\"\/products\/flex-p-set-22-q-akku-set-18v\"\u003eP-Set 22 Q Battery Set 18V\u003c\/a\u003e or \u003ca href=\"\/products\/flex-p-set-55-r-akku-set-18v\"\u003eP-Set 55 R Battery Set 18V\u003c\/a\u003e). The favorable additional price of the WHP holders compared to the main investment is justified by the convenience the system offers from day one. Once you have worked with the WHP wall solution, you will not want to go back to loose battery storage on the table.\u003c\/p\u003e\n","brand":"FLEX","offers":[{"title":"WHP-2 AC\/DC \"530882\"","offer_id":57377539981647,"sku":"D1-FLEX-530882","price":129.71,"currency_code":"EUR","in_stock":false},{"title":"WHP-1 AC\/DC \"530883\"","offer_id":57377540014415,"sku":"D1-FLEX-530883","price":70.21,"currency_code":"EUR","in_stock":false},{"title":"Battery Hook \"530720\"","offer_id":57377540047183,"sku":"D1-FLEX-530720","price":10.71,"currency_code":"EUR","in_stock":false},{"title":"Cable Hook \"530721\"","offer_id":57377540079951,"sku":"D1-FLEX-530721","price":9.52,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/flex-whp-wandhalter-haken-whp-2-ac-dc-530882-530882.png?v=1775059300"},{"product_id":"koch-chemie-pressure-sprayer-holder-wandhalter-fuer-zwei-drucksprueher","title":"Pressure Sprayer Holder Wall Bracket for Two Sprayers","description":"","brand":"Koch-Chemie","offers":[{"title":"1 Stück","offer_id":58742221013327,"sku":"D1-KCX-9998309","price":35.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-pressure-sprayer-holder-wandhalter-fuer-zwei-drucksprueher.png?v=1789070414"}],"url":"https:\/\/detiiling1.com\/collections\/wandhalterungen.oembed","provider":"Detailing1","version":"1.0","type":"link"}