{"title":"Grip-additieven Soft \u0026 Wax Slip van COLOURLOCK","description":"\u003ch2 id=\"speakable-headline\"\u003eCOLOURLOCK feel additives adjust the haptics of the finish\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\n  \u003cp\u003e\u003cem\u003eWhat are COLOURLOCK feel additives? Additives that are stirred into the top coat to determine how the finished surface feels: COLOURLOCK \"Soft Slip\" reduces friction and makes the finish velvety, while COLOURLOCK \"Wax Slip\" increases it to create the waxy, tactile feel of modern production leathers.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eCOLOURLOCK feel additives\u003c\/strong\u003e are haptic additives for the top coat layer of leather dyeing. They do not contain color and do not control gloss—they exclusively change how the surface feels to the touch. COLOURLOCK \"Soft Slip\" lowers the coefficient of friction of the top coat, allowing the surface to glide softly and smoothly. COLOURLOCK \"Wax Slip\" works in the opposite direction: rich, dry, and slightly grippy—just how matte automotive leather feels from the factory.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eThe feel is mixed in, not applied.\u003c\/strong\u003e The feel additives come in 250 ml containers and are added to the ready-to-use top coat before the first cross-coat is sprayed. Applying a feel additive alone to a finished surface is ineffective: without the film in which it can embed itself, it lacks the environment in which it could take effect.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSoft Slip reduces friction, Wax Slip increases it.\u003c\/strong\u003e It is the same control knob, turned in two directions. The result can only be assessed once the film has chemically cross-linked—it is thermally dry after one to two hours, but finished only after 24 to 48 hours. Anyone who touches it beforehand is measuring the wrong state.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAdjustments are made on a test surface, not on the seat.\u003c\/strong\u003e Dosage determines intensity, and the data sheets provide a range for this, not a single value. Therefore, first paint a scrap piece or a hidden area—using the same substrate, the same number of layers, and the usual spray pattern from 15 to 20 centimeters at around two bar.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e A feel additive does not repair a failed finish. We regularly receive inquiries about re-dyed seats that feel sticky and attract lint from every pair of jeans—and the reflex is then to stir in something to counter the stickiness. That is the wrong lever. Freshly painted leather becomes sticky if the film is applied too thick, dried too cold, or prepared without a cross-linker; for this, a cross-linker and patience help, not COLOURLOCK \"Soft Slip\". The additive is intended for cases where the buildup is technically sound and only the tactile feel is not yet right. Mixing both masks a processing error instead of fixing it.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe feel reveals the repair faster than the color shade\u003c\/h3\u003e\n\u003cp\u003eThe tone is right, the gloss is appropriate, and the edge has faded cleanly. And yet, anyone who sits down notices that this seat bolster has been worked on.\u003c\/p\u003e\n\n\u003cp\u003eThis is because the hand tests differently than the eye. A half-shade deviation is noticeable under grazing light and rarely otherwise; a different coefficient of friction is immediately apparent because the skin detects differences in friction where the eye can no longer see anything. Friction means: how strongly a surface brakes what brushes over it. You notice this when the hand pulls differently over the repaired area than over the surrounding surface—sometimes it feels smoother, sometimes it suddenly grips.\u003c\/p\u003e\n\n\u003cp\u003eThis is exactly where this category comes in. Color brings the tone, the top coat brings resistance and gloss level, and the feel additives bring the touch. Only when all three controls are adjusted to the environment does the repair disappear—not only in the light but also under the hand.\u003c\/p\u003e\n\n\u003cp\u003eOur experience from the inquiries we receive after dyeing work goes in the same direction: the color shade is rarely disputed. The complaint is that the seat \"feels like paint,\" that the steering wheel has become smoother than before, or that the surface makes a noise when sliding that wasn't there before. These are all haptic issues, and all three originate in the last step of the process.\u003c\/p\u003e\n\n\u003cp\u003eAnd it is the step that is most easily skipped. The surface looks finished after the top coat, the vehicle is meant to be returned, the feel is \"okay for now.\" The feedback then comes not on the day of delivery, but two weeks later—when someone has gotten in and out a hundred times and the hand has assessed the surface.\u003c\/p\u003e\n\n\u003ch3\u003eSoft Slip makes it velvety, Wax Slip makes it waxy and grippy\u003c\/h3\u003e\n\u003cp\u003eBoth additives work on the same spot: in the uppermost micrometers of the dried top coat. What they do there is opposite.\u003c\/p\u003e\n\n\u003cp\u003eCOLOURLOCK \"Soft Slip\" lowers the surface energy of the top layer. You can imagine it as a wafer-thin sliding layer that settles on the film surface during drying and offers the contact partner—palm, trousers, sleeve—fewer grip points. Practically: the surface feels soft and velvety instead of like paint, without creating a greasy shine. This is the choice for anything that is constantly touched and should feel pleasant: steering wheel rim, armrest, seat surface, furniture leather, bags.\u003c\/p\u003e\n\n\u003cp\u003eCOLOURLOCK \"Wax Slip\" works with fine wax particles that remain embedded in the drying film and microscopically roughen the surface. The smooth paint layer becomes slightly structured, and it feels dry and rich instead of smooth. In everyday life: this is exactly the grippy, waxy-looking feel that modern matte production leathers have—if you hit that, your repair will blend in visually and haptically with the original part.\u003c\/p\u003e\n\n\u003cp\u003eThe name is deliberately misleading here, so to be clear: \"Slip\" does not mean that COLOURLOCK \"Wax Slip\" makes the surface slippery. It creates grip. If you are looking for a seat surface where you don't slide around when cornering, this is the right choice—if you want a steering wheel that runs silky through your hand, go for the other.\u003c\/p\u003e\n\n\u003cp\u003eCombining them works, and that is more than a compromise. Prepared together, the two result in a mixed haptic: the velvety softness of one, the dry grip of the other. Anyone with original leather in front of them that feels neither smooth nor rough, but both simultaneously, will reach the goal faster with a mixture than with one of the additives alone.\u003c\/p\u003e\n\n\u003ch3\u003eWhy a leather seat creaks and a steering wheel looks greasy\u003c\/h3\u003e\n\u003cp\u003eThe two most common haptic complaints about automotive leather are noise and gloss. Both have the same physical root—friction—and both can be influenced in the finish.\u003c\/p\u003e\n\n\u003cp\u003eCreaking is caused by stick-slip: two surfaces stick briefly, tension builds up, then they release jerkily, stick again, and release again. This sequence in millisecond intervals is what you hear as creaking or squeaking. In a car, this happens where leather works against leather or leather against plastic: at the seam between the seat cushion and backrest, on the side bolster, at the seat belt buckle. In other words: a finish with a lower coefficient of friction lets the surfaces glide instead of grip, and the seat remains silent.\u003c\/p\u003e\n\n\u003cp\u003eThe greasy shine on the steering wheel has the opposite mechanism. Here, palms rub over the same spot for years, flattening the structure of the top layer and effectively polishing it. The smoothed surface reflects more light directly—it shines. In our experience, this is the most common motivation for re-doing a steering wheel at all: not a crack, but the shiny zones at ten and two o'clock, which make the mileage look older than it is.\u003c\/p\u003e\n\n\u003cp\u003eWhen exactly this steering wheel is repainted, the choice of feel is not a luxury. A smooth top coat without an additive often feels harder and more slippery on the rim than the original leather once did—and the hand notices this at every traffic light. Adjusted to be waxy and grippy, it is closer to the factory condition; adjusted to be velvety, it runs more softly through the hand. Both are justifiable; the wrong thing is not to decide at all.\u003c\/p\u003e\n\n\u003cp\u003eA side effect that almost no one considers: lint collection. A surface with high adhesion holds onto textile fibers, and beige seats look like they haven't been cleaned after every drive in dark jeans. A low-friction top layer releases the fibers again when you get out. This is not a cleaning issue, but a property that was decided in the mixing cup.\u003c\/p\u003e\n\n\u003ch3\u003eStirred into the top coat, decided on the test surface\u003c\/h3\u003e\n\u003cp\u003eThe feel additive is the last decision before the final work step. Everything before that—degreasing, priming, filling, dyeing—must be correct, otherwise the haptics become a secondary matter.\u003c\/p\u003e\n\n\u003cp\u003ePreparation is done in this order: select the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-top-coat\"\u003etop coat\u003c\/a\u003e in the desired base, adjust the gloss level via a mixture or the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-mattierung\"\u003ematting additive\u003c\/a\u003e COLOURLOCK \"Duller\", stir in the feel additive, and lastly add the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-vernetzer\"\u003ecross-linker\u003c\/a\u003e fresh. The cross-linker is deliberately added last because the clock starts ticking from that moment: prepared material continues to react in the cup and should never go back into the bottle.\u003c\/p\u003e\n\n\u003cp\u003eMixing thoroughly is not a minor detail here. An additive that has only been swirled will distribute unevenly over the surface, and then the upper half of the seat will feel different than the lower half. Stir, don't shake—shaking draws in air bubbles that end up as tiny craters in the film. The modified top coat is then applied completely normally: spray gun, airbrush, or sponge, in thin cross-coats with intermediate drying.\u003c\/p\u003e\n\n\u003cp\u003eThe test surface is the actual work step, not the optional extra. From our own experience, a leather scrap or a hidden zone is worth it—seat underside, trunk side panel, back of a headrest—using the same substrate and the same number of layers as the visible area later. Do not touch it until it is fully cured. A fresh film always feels softer and grittier than the finished one, and anyone who judges after two hours will inevitably dose it incorrectly.\u003c\/p\u003e\n\n\u003cp\u003eTwo frameworks distort the result further, and neither is in any instruction manual: temperature and skin condition. Leather feels different when warm than when cold, and a hand that has just been exposed to solvents or gloves is useless as a measuring instrument. Therefore, compare the test surface and the original surface in the same room, at the same time, with the same hand. If the hand reports no transition, no one else has a chance to find your work.\u003c\/p\u003e\n\n\u003ch3\u003eWhat feel additives cannot do, and where the upholsterer takes over\u003c\/h3\u003e\n\u003cp\u003eThe category is narrowly defined, and that is its strength. Anyone who uses it for more than it can do only shifts a problem to a later point.\u003c\/p\u003e\n\n\u003cp\u003eA feel additive does not control gloss. COLOURLOCK \"Wax Slip\" lowers it minimally through the microstructure, while COLOURLOCK \"Soft Slip\" practically doesn't at all—anyone who wants a shiny surface to be matte should work with COLOURLOCK \"Duller\" or directly with the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-top-coat-matt\"\u003ematte top coats\u003c\/a\u003e. Likewise, a feel additive does not extend durability: abrasion resistance and water resistance come from the cross-linker, not the feel additive. And neither provides opacity; that lies in the color layer.\u003c\/p\u003e\n\n\u003cp\u003eNor are they independent products. Without a top coat, there is nothing for the additive to embed itself in—painted onto un-dyed, un-coated leather, it remains ineffective or sits on top as residue. If you want to make an intact, untreated leather surface more supple, you are looking for a \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung-lederversiegelung\"\u003eleather sealant\u003c\/a\u003e, which is made exactly for that purpose.\u003c\/p\u003e\n\n\u003cp\u003eThe substrate limit is the tougher one: open-pored aniline leather, nubuck, suede, and Alcantara cannot tolerate a closed paint film, so they cannot tolerate an additive in it either. They live from an absorbent, velvety surface, and any film-forming layer destroys that. For these substrates, the path is via the film-free \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-farbauffrischer\"\u003ecolor refreshers\u003c\/a\u003e, not through the painting line.\u003c\/p\u003e\n\n\u003cp\u003eHonestly classified, and this is experience from workshop practice: two cases do not belong in DIY. One is the predetermined breaking seams of side airbags—such a tear seam must not be painted over or stiffened, because even slightly increased tear resistance can delay deployment. That belongs in a specialist upholstery workshop with a certificate of expertise. The other is the color shade match itself: a production color can be mixed, but aged leather next to it is never the factory tone again. Anyone dyeing a single surface in the middle of a set is working against this difference—the feel additive makes the result more authentic, but it does not resolve the color transition.\u003c\/p\u003e\n\n\u003ch3\u003eWhich feel additive matches your surface\u003c\/h3\u003e\n\u003cp\u003eThe decision comes down to a single question: How does the surface right next to it feel? Everything else is dosage.\u003c\/p\u003e\n\n\u003cp\u003eIf the original leather feels dry, rich, and slightly resistant—the normal case for modern, matte automotive leathers—COLOURLOCK \"Wax Slip\" is the direct path. Seat cushions, side bolsters, armrests, and door panels typically run on this. If, on the other hand, the surface should run soft and silky through the hand, as is expected on steering wheels, furniture leather, bags, and high-quality interior zones, COLOURLOCK \"Soft Slip\" is the go-to. For surfaces that feel like both, both are prepared together and balanced via the test surface.\u003c\/p\u003e\n\n\u003cp\u003eYou do not need a feel additive if no top coat is sprayed at all. A single tired seat bolster on your own vehicle, refreshed without a spray gun, remains with the color refresher, which already includes color and finish. You can find the remaining adjusting screws for the final layer—gloss, cross-linking, viscosity, seam coverage—one level up under \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-additive\"\u003eadditives \u0026amp; auxiliaries\u003c\/a\u003e, and the complete procedure before that under \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben\"\u003edyeing \u0026amp; finish\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eAnd the trick that brings the most during comparison costs nothing: check the feel with the back of your hand, not with your fingertips. The fingertips are worn and calloused; the back of the hand perceives differences in friction much more finely. Stroke it over the original surface, then over your test piece—at the same moment, in the same room. If the hand reports no transition, no one else has a chance to find your work.\u003c\/p\u003e\n","products":[{"product_id":"koch-chemie-colourlock-soft-slip-top-coat-zusatz-samtige-oberflaeche","title":"COLOURLOCK \"Soft Slip\" Top Coat-additief voor een fluweelzacht oppervlak","description":"\u003ch2\u003eCOLOURLOCK Soft Slip — Top Coat-additief voor een fluweelzacht lederoppervlak\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWat doet COLOURLOCK Soft Slip? — Het additief geeft COLOURLOCK top coats een fluweelzachte touch, vermindert de wrijving en zorgt voor een huidvriendelijke, luxe finish op leer en kunstleer.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Soft Slip\u003c\/strong\u003e is het professionele additief voor COLOURLOCK top coats wanneer je een extra zachte, huidvriendelijke touch op leer of kunstleer wilt. Het verlaagt de wrijving, verbetert het gripgevoel en zorgt voor een fluweelzachte, hoogwaardige finish – ideaal voor stuurwielen, zittingen, meubels, tassen en alle plekken die zacht en soepel moeten aanvoelen. Perfect na een kleur- of reparatiebeurt, om het oppervlak niet alleen visueel maar ook qua gevoel naar premium niveau te tillen.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluweelzacht gripgevoel\u003c\/strong\u003e – Geeft top coats een zachte, luxe touch-finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinder wrijving\u003c\/strong\u003e – Ideaal voor contactvlakken die minder plakkerig en prettiger in de hand moeten zijn.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessionele touch-optimalisatie\u003c\/strong\u003e – Perfect als laatste stap na kleuropbouw of reparaties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eTouch-technologie \u0026amp; werking in de top coat\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSoft Slip\u003c\/strong\u003e verandert de oppervlakte-energie van de top coat, waardoor de uiteindelijke coating minder wrijving geeft. Daardoor voelt het leer zachter, gladder en fluweliger aan – zonder vette glans of kunstmatige gladheid. De speciale additiefformule blijft stabiel in de gedroogde top coat, dus het effect blijft langdurig voelbaar. Volgens de fabrikant werkt Soft Slip vooral goed samen met matte of zijdematte top coats, want juist daar valt het verschil in gevoel het meest op.\u003c\/p\u003e\n\u003ch3\u003eMengen, aanbrengen \u0026amp; perfect verwerken\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSoft Slip\u003c\/strong\u003e meng je direct in de COLOURLOCK top coat. De dosering bepaalt hoe intens de fluweelzachte finish wordt – weinig voor lichte gladheid, meer voor een maximaal zacht gevoel. Na goed doormengen breng je de top coat zoals gewend aan met een spons, airbrush of spuitpistool. Het additief heeft geen invloed op de kleurdekking, het is puur voor het gevoel en werkt perfect samen met andere additieven zoals Duller of Crosslinker CD. Belangrijk is een gelijkmatige aanbreng, zodat het gripgevoel homogeen wordt.\u003c\/p\u003e\n\u003ch3\u003eResultaat, toepassingen \u0026amp; verschil met andere additieven\u003c\/h3\u003e\n\u003cp\u003eNa het drogen krijg je een prettig zacht, bijna fluwelen oppervlak dat merkbaar hoogwaardiger aanvoelt. \u003cstrong\u003eSoft Slip\u003c\/strong\u003e is geschikt voor stuurwielen, zittingen, armleuningen, meubels, tassen of kleding – overal waar premium gevoel telt. Het additief is geen glansregelaar (dat doet Duller) en geen duurzaamheidsversterker (dat neemt Crosslinker CD over). Het is een pure feel-enhancer die het oppervlak naar een chique, soepel niveau tilt.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVeelgestelde vragen over COLOURLOCK Soft Slip\u003c\/h2\u003e\n\u003ch4\u003eVerandert Soft Slip de glansgraad?\u003c\/h4\u003e\n\u003cp\u003eNee. Het beïnvloedt het gevoel, niet de glans. Voor matteren is Duller het juiste additief.\u003c\/p\u003e\n\u003ch4\u003eKan ik Soft Slip met Crosslinker mengen?\u003c\/h4\u003e\n\u003cp\u003eJa. Beide kun je samen in de top coat verwerken.\u003c\/p\u003e\n\u003ch4\u003eWordt het leer glad door Soft Slip?\u003c\/h4\u003e\n\u003cp\u003eNee, alleen zacht en prettig. Het vermindert wrijving zonder de controle aan te tasten.\u003c\/p\u003e\n\u003ch4\u003eIs Soft Slip ook geschikt voor kunstleer?\u003c\/h4\u003e\n\u003cp\u003eJa. Het effect werkt op kunstleer net zo goed als op echt leer.\u003c\/p\u003e\n\u003ch4\u003eWanneer breng ik Soft Slip aan?\u003c\/h4\u003e\n\u003cp\u003eIn de laatste stap – als onderdeel van de finale top coat, na kleur, reparatie of structuuropbouw.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLaatst bijgewerkt: 03.12.2025 — Auteur: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"250ml","offer_id":56547051012431,"sku":"D1-KCX-527-250ML-01","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/527-250ML-01_1.png?v=1778250893"},{"product_id":"koch-chemie-colourlock-wax-slip-top-coat-zusatz-wachsartige-oberflaechen","title":"COLOURLOCK \"Wax Slip\" Top Coat-additief voor wasachtige oppervlakken","description":"\u003ch2\u003eCOLOURLOCK Wax Slip — Top Coat-additief voor wasachtige, natuurlijk aanvoelende lederoppervlakken\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWat doet COLOURLOCK Wax Slip? — Het additief geeft COLOURLOCK Top Coats een wasachtige, grippy-matte feel en zorgt voor een natuurlijke, licht wasachtige OEM-finish op leer en kunstleer.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Wax Slip\u003c\/strong\u003e is het speciale additief voor COLOURLOCK Top Coats als je een wasachtig, licht grippy en natuurlijk mat oppervlak wilt. Veel moderne auto-, meubel- en interieurleders hebben precies dat subtiele, wasachtige gevoel waardoor een reparatie echt origineel oogt. Wax Slip stuurt de oppervlakte-energie van de Top Coat bij, zodat de finish nooit glad of glanzend aanvoelt, maar lekker vol, natuurlijk en hoogwaardig.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWasachtige feel\u003c\/strong\u003e – Geeft je het grippy, natuurlijke oppervlak dat je op modern OEM-autoleer ziet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeel-optimalisatie in de finish\u003c\/strong\u003e – Ideaal voor leer dat bewust minder glad mag ogen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombineert met andere Top Coat-additieven\u003c\/strong\u003e – Werkt met Duller, Crosslinker \u0026amp; Soft Slip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFeel \u0026amp; wasfilmtechnologie in de Top Coat\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWax Slip\u003c\/strong\u003e is opgebouwd uit fijne, structuurvormende wasadditieven die tijdens het drogen van de Top Coat in de deklaag ingebed blijven. Zo krijg je een grippy-mat, licht wasachtig oppervlak, zoals je dat op moderne matte leders kent. De additieven veranderen de microstructuur van de lak zonder de dekking te beïnvloeden. Het leer oogt minder glad, voelt voller aan en weerkaatst licht natuurlijker. Juist bij reparaties aan stuurwielen, zitvlakken, armleuningen of meubelzones bouw je er een extreem authentieke OEM-finish mee op.\u003c\/p\u003e\n\u003ch3\u003eMengen, aanbrengen \u0026amp; best practices voor een authentieke feel\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWax Slip\u003c\/strong\u003e meng je rechtstreeks in de COLOURLOCK Top Coat. De dosering bepaalt hoe wasachtig-grippy het wordt: weinig additief geeft een subtiele feel, meer bouwt een duidelijker, voller gripgevoel op. Na goed mengen zet je de aangepaste Top Coat gewoon aan met spuitpistool, airbrush of spons. In combinatie met Duller (voor mat), Soft Slip (voor zachter) of Crosslinker CD (voor duurzamer) stem je de eindfinish precies af op het originele leer. Belangrijk is dat je gelijkmatig aanzet, zodat de feel over het hele vlak mooi in balans blijft.\u003c\/p\u003e\n\u003ch3\u003eResultaat, toepassingen \u0026amp; verschil met Soft Slip \/ Duller\u003c\/h3\u003e\n\u003cp\u003eNa het drogen krijg je een licht grippy, wasachtig oppervlak dat echt natuurlijk en hoogwaardig aanvoelt. \u003cstrong\u003eWax Slip\u003c\/strong\u003e is ideaal voor mat autoleer, interieurzones, meubels, tassen en al het leer met een “wasachtige OEM-finish”. Vergeleken met Soft Slip (fluweelzachte touch) geeft Wax Slip een grippere, natuurlijkere feel. Duller stuurt de glans, Wax Slip bepaalt de oppervlaktestructuur. Samen geven ze een extreem authentieke, originele lederuitstraling.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVeelgestelde vragen over COLOURLOCK Wax Slip\u003c\/h2\u003e\n\u003ch4\u003eVerandert Wax Slip de glansgraad?\u003c\/h4\u003e\n\u003cp\u003eMaar minimaal. Voor echte mattering pak je Duller.\u003c\/p\u003e\n\u003ch4\u003eKan ik Wax Slip met Soft Slip combineren?\u003c\/h4\u003e\n\u003cp\u003eJa, dan krijg je een mix van fluweelzachte en wasachtig-grippy feel.\u003c\/p\u003e\n\u003ch4\u003eWordt het oppervlak glad?\u003c\/h4\u003e\n\u003cp\u003eNee. Wax Slip is juist gemaakt voor grip, niet voor gladheid.\u003c\/p\u003e\n\u003ch4\u003eWerkt Wax Slip ook op kunstleer?\u003c\/h4\u003e\n\u003cp\u003eJa, het effect komt daar net zo goed tot z'n recht.\u003c\/p\u003e\n\u003ch4\u003eWanneer breng je Wax Slip aan?\u003c\/h4\u003e\n\u003cp\u003eAls additief in de finale Top Coat – na kleur, binder of structuurreparatie.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLaatst bijgewerkt: 04.12.2025 — Auteur: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"250ml","offer_id":56562378604879,"sku":"D1-KCX-626-250ML-01","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/626-250ML-01_1_d0121c88-fd76-42cc-8437-1ff7d9ac7de0.png?v=1778250903"}],"url":"https:\/\/detiiling1.com\/nl\/collections\/koch-chemie-colourlock-faerben-griff-zusaetze.oembed","provider":"Detailing1","version":"1.0","type":"link"}