{"title":"Lederprimer van COLOURLOCK","description":"\u003ch2 id=\"speakable-headline\"\u003eLeather dye lasts longer with COLOURLOCK leather primer\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\n  \u003cp\u003e\u003cem\u003eWhat is COLOURLOCK leather primer? It is the step between degreasing and dyeing: COLOURLOCK \"Leather Primer\" bonds with the topcoat and gives the leather dye a firm hold, while COLOURLOCK \"Blocker\" applies an insulation film over substrates from which stains might migrate to the surface. Both belong on pigmented smooth leather.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eCOLOURLOCK leather primer\u003c\/strong\u003e is the preliminary stage of the dyeing process and accomplishes what cleaning and degreasing alone cannot: a surface to which leather dye adheres permanently and through which nothing from underneath can penetrate. COLOURLOCK \"Leather Primer\" acts as an adhesion promoter, while COLOURLOCK \"Blocker\" acts as a barrier layer against migrating dyes. Behind the brand is the leather specialist that has been supplying saddlers and detailers since 1995 as the Lederzentrum and is now part of Koch-Chemie.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWithout primer, durability is left to chance.\u003c\/strong\u003e Aged leather no longer has a uniform surface: the seat bolster, entry edge, and steering wheel rim are worn smooth, while the adjacent backrest is not. The adhesion promoter levels these differences before the first coat of dye is applied. This is what separates a dye job that lasts for years from one that tears off the seat bolster after a single summer.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eStains return if they aren't blocked.\u003c\/strong\u003e Jean dye transfer, nicotine film, and residues from old repairs sit deeper than cleaning can reach. COLOURLOCK \"Blocker\" traps them under a transparent insulation film instead of letting them migrate through the fresh dye. You'll know it's working because light leather stays light, even months after dyeing.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eApply thinly, wait a few minutes, continue working.\u003c\/strong\u003e Neither primer needs a heavy application, just an even one. The surface is ready as soon as it is matte and dry — this takes minutes, not hours. The small containers are sufficient for a single seat, while both products are available in 1000 ml \/ 1 liter sizes for complete sets.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003ePro-tip from Detailing1:\u003c\/strong\u003e The most common mistake when priming is applying it too thickly. In our consultations, we regularly hear about seats where the fresh dye flakes off as a film after just a few weeks — and almost always, the degreasing step was skipped or the primer was applied heavily so it would \"grip better.\" Both result in the same outcome: a soft intermediate layer exists between the leather and the dye, which moves with every seat movement and eventually tears. Apply the primer so thinly that the surface only looks slightly damp, let it dry completely matte, and apply a second thin coat rather than one heavy one.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePriming is the step between degreasing and dyeing\u003c\/h3\u003e\n\u003cp\u003eBetween the degreased leather surface and the first layer of dye lies a step that most DIY dyeing attempts skip — and where they later fail.\u003c\/p\u003e\n\n\u003cp\u003eThe dyeing sequence in a professional detailing shop is a fixed chain: clean, \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-reinigung-entfetter\"\u003edegrease\u003c\/a\u003e, prime, \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-reparatur-leder-fuellstoffe\"\u003efill\u003c\/a\u003e open areas, \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-lederfarben\"\u003edye\u003c\/a\u003e, finish with \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-top-coat\"\u003etop coat\u003c\/a\u003e, and adjust the feel using \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-additive\"\u003eadditives\u003c\/a\u003e. Each link presupposes that the previous one was done cleanly. Priming sits exactly at the point where a cleaned substrate becomes ready for dye.\u003c\/p\u003e\n\n\u003cp\u003eLeather makes this step necessary because it moves. It stretches when you sit down, contracts as it cools, and works in every direction over the years. A layer of dye that sits only on top must accommodate this movement — and only does so if it is bonded to the substrate rather than just resting on it. The primer provides exactly this bond.\u003c\/p\u003e\n\n\u003cp\u003eBehind this are binders: polymers that dock at one end to the top leather or polyurethane layer and hold the subsequent dye layer firmly at the other. Think of it like a Velcro connection between two materials that would not stick together on their own. In practical terms, this means: the dye no longer flakes off in patches; it ages with the leather.\u003c\/p\u003e\n\n\u003cp\u003eDegreasing alone is not enough for this. The degreaser removes what is in the way — care product residues, skin oils, silicone films. It does not build anything up. After degreasing, the surface is clean but still as uneven as it was before: mirror-polished where trousers have rubbed for years, still open-pored elsewhere. It only becomes ready for dye through the primer, which brings both conditions to the same level.\u003c\/p\u003e\n\n\u003ch3\u003eAdhesion promoters and barrier layers solve different problems\u003c\/h3\u003e\n\u003cp\u003eCOLOURLOCK primers cover two tasks that rarely coincide in everyday workshop life: creating adhesion and blocking stains.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-haftvermittler\"\u003eadhesion promoter\u003c\/a\u003e COLOURLOCK \"Leather Primer\" is the standard case. It is used on every pigmented smooth leather that is to be touched up or recolored, turning an unevenly aged surface into one that is evenly receptive. It is particularly in demand on shiny, tightly sealed leathers and wherever silicone-based products have been used for years — water-based leather dye will simply slip off those surfaces without preparation.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-sperrschicht\"\u003ebarrier layer\u003c\/a\u003e COLOURLOCK \"Blocker\" solves a different problem: dyes that migrate upward from the substrate. This affects leather after intensive cleaning or stripping, after the removal of jean dye transfer, with nicotine stains, and with old repairs whose pigments are still embedded in the surface. The Blocker applies a transparent insulation film over this while remaining open enough for the dye to adhere to it.\u003c\/p\u003e\n\n\u003cp\u003eWhat both are not, which distinguishes them further: not a cleaner, not a filler, not a finish. The primer replaces neither the step before nor the one after. It does not cover anything, it does not level anything, and it does not protect the finished surface — that is handled by the top coat. Anyone using them as an all-purpose product is only shifting the problem one layer higher.\u003c\/p\u003e\n\n\u003cp\u003eBoth products are available in a small container for a single panel and as a 1000 ml \/ 1 liter size for the professional working on a full interior in one go. If you are touching up a seat bolster, the small bottle will last for several projects; if you are doing seats, door cards, and armrests together, you calculate differently.\u003c\/p\u003e\n\n\u003ch3\u003eAdhesion promoter attracts, barrier layer holds back\u003c\/h3\u003e\n\u003cp\u003eThe decision between the two is not based on the product, but on the question of what your substrate is doing — failing to adhere or bleeding through.\u003c\/p\u003e\n\n\u003cp\u003eIf the dye doesn't stick, the adhesion promoter is the answer. Typical scenario: The leather is clean, degreased, and yet so smooth or sealed that the dye beads up when dabbing instead of forming a closed surface. If, on the other hand, a dark shadow keeps coming through the fresh, light-colored dye, better adhesion won't help — then the source must be blocked.\u003c\/p\u003e\n\n\u003cp\u003eIn our practice, both cases often occur in the same vehicle: light seats with jean dye transfer on the seat area and a worn-smooth, shiny driver's seat next to it. In that case, the sequence is Blocker first, Primer on top, letting each dry completely matte. The barrier layer belongs on the bottom because it needs to enclose the problem; the adhesion promoter belongs on top because the dye sits on it.\u003c\/p\u003e\n\n\u003cp\u003eThe reason for this order is migration: dissolved dyes and oil residues move slowly upward in a soft layer until they become visible at the surface. The insulation film interrupts this path. In everyday terms: a seat that became blotchy again after the first dye job will not be saved on the second attempt by more dye, but by the layer underneath.\u003c\/p\u003e\n\n\u003cp\u003eYou can test whether the preparation is correct in a hidden spot before tackling the seat area. Apply primer and a thin layer of dye to a piece of side bolster under the seat edge, let both dry completely, and pull a piece of tape over the surface. If dye stays on the tape, the substrate was not ready. These five minutes will, in doubt, save you an entire seat.\u003c\/p\u003e\n\n\u003ch3\u003eApply thinly, dry matte, then dye\u003c\/h3\u003e\n\u003cp\u003ePriming is the fastest step in the whole chain and the one where most time is saved — in the wrong place.\u003c\/p\u003e\n\n\u003cp\u003eApplication is done with a sponge, cloth, or spray, always in overlapping passes and always sparingly so that no material remains in seams and perforations. A fine, closed film is sufficient. Too much product makes adhesion worse instead of better because the layer remains soft in itself, and the dye on top cannot find a firm base.\u003c\/p\u003e\n\n\u003cp\u003eAfter that, only one criterion counts: the surface must be dry and matte before dye is applied. At room temperature, this takes a few minutes; in a cool garage in November, significantly longer. If the surface is still shiny, it is not dry — then the dye layer will bond into a damp primer, and the whole surface will remain soft. For difficult substrates, a second thin pass is more sensible than one thick one.\u003c\/p\u003e\n\n\u003cp\u003eTwo areas require special attention: seams and perforations. Material collects in the seam, never dries properly there, and later shows up as a hard ridge; in the perforation, it clogs the holes and removes the seat's breathability. Work on such areas with little product and remove excess directly with the edge of the sponge instead of leaving it there.\u003c\/p\u003e\n\n\u003cp\u003eExpect the preparation to take longer than the dyeing itself the first time. Cleaning, degreasing, and priming take up a good half of the total time for a seat; dyeing afterward goes quickly. This feels unfair during the first project, but it is part of the process — the chain is decided at the bottom, not at the top.\u003c\/p\u003e\n\n\u003ch3\u003eFor us, dyeing fails more often due to the substrate than the dye\u003c\/h3\u003e\n\u003cp\u003eThe cases that reach us rarely have a dye problem. They have a substrate problem that the dye has only made visible.\u003c\/p\u003e\n\n\u003cp\u003eThe clear boundary first: Primers of this category are made for pigmented smooth leather. Open-pored aniline leather, nubuck, and suede do not get them — the film seals the open surface and destroys exactly the finish that defines these leathers. For hard plastic carriers, trim strips, and panels, there is a dedicated \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-kunststoff-grundierung\"\u003eplastic primer\u003c\/a\u003e; it does not belong on leather, and vice versa.\u003c\/p\u003e\n\n\u003cp\u003eBrittle, dried-out leather is the second case where priming is too early. Anyone who primes and dyes a hard, cracked surface preserves the brittleness — the dye tears where the leather tears. Such seats belong to a \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-reparatur-rueckfetter\"\u003eleather softener\u003c\/a\u003e treatment first until the fibers are flexible again. Open cracks and missing spots are also not a priming issue, but a job for filler and repair compound.\u003c\/p\u003e\n\n\u003cp\u003eFaux leather and the faux leather-leather combinations of modern seats are the third special case. Visually, they are hardly distinguishable from pigmented smooth leather; in construction, they are a different world: a polyurethane layer on a textile backing that works differently and ages differently. Here, a test in a hidden spot determines whether the buildup will hold — and honestly, with heavily aged, already brittle faux leather, replacing the cover is often the better path than dyeing.\u003c\/p\u003e\n\n\u003cp\u003eFinally, workshop reality sets two boundaries. Airbag seams on the seat are safety-relevant components with defined tear strength; anything that stiffens or glues the seam belongs to the saddler and not in a home repair. And matching the color remains manual work: factory colors vary across model years and equipment; a sample on the component beats every color code table. Anyone dyeing a visible surface mixes and tests in a hidden spot before tackling the seat area.\u003c\/p\u003e\n\n\u003ch3\u003eWhich primer your leather project needs\u003c\/h3\u003e\n\u003cp\u003eThe fastest path to the answer is two questions: Is the dye not sticking — or is something coming through it?\u003c\/p\u003e\n\n\u003cp\u003eIf it's not sticking, COLOURLOCK \"Leather Primer\" is the standard path. This applies to worn-smooth seat bolsters, shiny steering wheel rims, and any leather that has been treated with care products for years. If something is coming through — dark shadows on light leather, edges of old repairs, nicotine film — then COLOURLOCK \"Blocker\" belongs in front of it. For light-colored leathers with a known history of bleeding, both belong in the buildup in that same order.\u003c\/p\u003e\n\n\u003cp\u003eThe container size follows the project, not the supply. For a single seat bolster, a steering wheel rim, or an armrest, the small bottle will last for several jobs because only a few milliliters are used per surface. Anyone working through a complete set or several vehicles in a row should choose the 1000 ml \/ 1 liter size — if only because running out of an opened container in the middle of a job is the most unpleasant scenario.\u003c\/p\u003e\n\n\u003cp\u003eAnyone dyeing for the first time does not need to hunt for the items individually: the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-sets-faerbe-sets\"\u003ecomplete dyeing sets\u003c\/a\u003e include cleaning, preparation, dye, and finish in a coordinated system. All other preliminary stages of the dyeing process can be found one level up: \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-faerben-grundierung\"\u003eBack to primer \u0026amp; adhesion promoter from COLOURLOCK\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eAnd the sentence that carries the whole category: A primer costs you ten minutes and a few milliliters; its absence costs you the entire dye job. Of all the steps in the dyeing sequence, it is the most invisible — and the only one you cannot repair afterward without taking everything above it off again.\u003c\/p\u003e\n","products":[{"product_id":"koch-chemie-colourlock-leather-primer-haftvermittler-leder","title":"COLOURLOCK \"Leather Primer\" hechtprimer voor lederondergrond en -kleur","description":"\u003ch2\u003eCOLOURLOCK Leather Primer — hechtprimer voor goede kleurhechting op leer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWaar is COLOURLOCK Leather Primer voor? — De primer legt een gelijkmatig grijpend oppervlak neer, stabiliseert de lederstructuur en verbetert duidelijk hoe kleur- en reparatieproducten zoals Leather Fresh of Fluid Leather zich eraan binden.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Leather Primer\u003c\/strong\u003e is de professionele hechtprimer voor elke lederreparatie waarbij een kleuropfrissing, een herkleuring of structuuropbouw betrouwbaar moet blijven zitten. De primer maakt het lederoppervlak goed klaar, verhoogt de hechting van COLOURLOCK-kleuren en vulmassa's en zorgt dat reparaties duurzamer, gelijkmatiger en optisch netter uitvallen. Ideaal voor auto, meubels en fashion-stukken, plus elk gepigmenteerd leer dat vóór een kleurcorrectie ontvet, gestabiliseerd en grijpklaar gemaakt moet worden.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetere kleurhechting\u003c\/strong\u003e – De primer grijpt in het lederoppervlak en geeft de volgende kleurlagen iets stevigs om zich aan vast te houden.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGelijkmatig reparatiebeeld\u003c\/strong\u003e – Ideaal vóór Leather Fresh of Fluid Leather, zodat de kleur gelijkmatig dekt in plaats van vlekkerig te worden.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessionele reparatiebasis\u003c\/strong\u003e – Stabiliseert de oppervlaktestructuur en beperkt hechtproblemen op gladde of licht verzegelde leersoorten.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eHechttechnologie \u0026amp; hoe het werkt\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeather Primer\u003c\/strong\u003e gebruikt speciale bindmiddelen die zich in de bovenste leer- of PU-toplaag haken en tegelijk een ideale basis leggen voor de COLOURLOCK-kleuren die volgen. Dat is belangrijk, want afhankelijk van gebruik, onderhoud en leeftijd kan leer een ongelijke oppervlaktespanning ontwikkelen. Zonder hechtprimer grijpen kleurproducten slechter, bladderen ze af of dekken ze ongelijk. De primer bouwt een microfijne hechtmatrix op die zowel soepel als sterk blijft — een echt pluspunt voor stuurwielen, zijwangen van stoelen en andere zwaar belaste lederdelen. Volgens Koch-Chemie zorgt de receptuur dat kleurlagen veel beter in het oppervlak worden ingebonden en reparaties merkbaar langer meegaan.\u003c\/p\u003e\n\u003ch3\u003eVoorbereiding, aanbrengen \u0026amp; de juiste volgorde bij lederreparaties\u003c\/h3\u003e\n\u003cp\u003eVoordat je naar \u003cstrong\u003eLeather Primer\u003c\/strong\u003e grijpt, moet het leer grondig gereinigd en ontvet worden, zodat geen restjes de hechting in de weg zitten. Je zet de primer dun aan met een sponsje of doek en verdeelt hem gelijkmatig. Een fijne film is genoeg — te veel product haalt juist de hechting eruit. Na een korte droogtijd is het leer klaar voor COLOURLOCK Leather Fresh, Fluid Leather of andere kleurproducten. Bij reparaties op zwaar belaste vlakken zoals stuurwielen, zijwangen of meubelranden loont het echt om te primen, om een langdurige kleurbinding vast te zetten. De volgorde is altijd: reinigen → ontvetten → Leather Primer → kleur → bescherming\/verzorging.\u003c\/p\u003e\n\u003ch3\u003eResultaten, waar je het gebruikt \u0026amp; de winst in detail\u003c\/h3\u003e\n\u003cp\u003eNadat je hem hebt aangezet, oogt het oppervlak gelijkmatiger, stabieler en veel klaarder om kleursystemen op te nemen. Kleurcorrecties dekken beter, overgangen ogen zachter en de gerepareerde vlakken houden het langer vol. \u003cstrong\u003eLeather Primer\u003c\/strong\u003e verdient zijn plek bij elke professionele lederrestauratie, vooral bij leer dat sterk glanst, met siliconenrijke producten verzorgd is of gewoon een lastige ondergrond biedt om op te grijpen. Hij vervangt noch de reiniging, noch de verzorging — hij is de essentiële tussenstap voor hoogwaardige, duurzame kleuropbouw. Het product is geschikt voor voertuigen, meubels, tassen, kleding en alle soorten gepigmenteerd leer.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVeelgestelde vragen over COLOURLOCK Leather Primer\u003c\/h2\u003e\n\u003ch4\u003eMoet ik de primer vóór elke kleuropfrissing gebruiken?\u003c\/h4\u003e\n\u003cp\u003eWe raden het aan — vooral bij versleten of slecht hechtende oppervlakken, om de kleur goed vast te zetten.\u003c\/p\u003e\n\u003ch4\u003eIs de primer ook geschikt voor anilien- of nubuckleer?\u003c\/h4\u003e\n\u003cp\u003eNee. Hij is puur ontwikkeld voor gepigmenteerd glad leer.\u003c\/p\u003e\n\u003ch4\u003eHoelang moet de primer drogen?\u003c\/h4\u003e\n\u003cp\u003eMeestal een paar minuten. Het oppervlak moet droog en mat zijn voordat je kleur aanbrengt.\u003c\/p\u003e\n\u003ch4\u003eKan ik de primer ook zonder kleurcorrectie achteraf gebruiken?\u003c\/h4\u003e\n\u003cp\u003eNee. Het is een hechtprimer en werkt alleen als voorbereidingsstap voor kleur- of reparatieproducten.\u003c\/p\u003e\n\u003ch4\u003eVerbetert de primer hoe lang Fluid Leather meegaat?\u003c\/h4\u003e\n\u003cp\u003eJa. De reparatiemassa bindt merkbaar steviger en houdt mechanische belasting beter uit.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLaatst bijgewerkt: 02-12-2025 — Auteur: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56320404881743,"sku":"D1-KCX-525-1L-01","price":35.99,"currency_code":"EUR","in_stock":true},{"title":"250ml","offer_id":56320404914511,"sku":"D1-KCX-525-250ML-01","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/525-1L-01_1.png?v=1762120005"},{"product_id":"koch-chemie-colourlock-blocker-sperrschicht-verfaerbungen","title":"COLOURLOCK \"Blocker\" sperlaag tegen doorslaande verkleuringen","description":"\u003ch2\u003eCOLOURLOCK Blocker — sperlaag tegen verkleuringen op leer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWaar gebruik je COLOURLOCK Blocker voor? — De Blocker legt een isolerende sperlaag op leer die voorkomt dat verkleuringen, doorslag of kleurmigratie uit de ondergrond naar de oppervlakte komen.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Blocker\u003c\/strong\u003e is een speciale sperlaag die je vóór het verven of sealen aanbrengt om verkleuringen en doorslag van kleur betrouwbaar tegen te houden. Juist bij lastig leer – na het weghalen van jeansafgifte, bij oude reparaties, nicotineverkleuring of sterk vervuilde oppervlakken – houdt de Blocker restpigment of opgeloste kleurstoffen tegen zodat ze later niet opnieuw doorkomen. Zo krijg je een schone, stabiele basis voor een kleurresultaat dat blijvend gelijkmatig blijft.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffectieve sperlaag\u003c\/strong\u003e – Blokkeert verkleuringen, doorslag en kleurmigratie.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeale reparatiebasis\u003c\/strong\u003e – Stabiliseert lastige ondergronden vóór het verven.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnmisbaar bij probleemleer\u003c\/strong\u003e – Ideaal na GLD Solvent, grondige reiniging of ontvetting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSpertechnologie \u0026amp; werking\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBlocker\u003c\/strong\u003e legt na het aanbrengen een dunne, transparante isolatiefilm die voorkomt dat achtergebleven kleurstoffen, olieresten of vervuiling uit diepere lagen naar boven migreren. Die barrière is doorslaggevend als het leer eerder grondig gereinigd, ontkleurd of chemisch behandeld is. De Blocker stabiliseert het oppervlak zonder het te sealen zoals een Top Coat, en blijft open genoeg zodat de kleur- of finishproducten erna goed hechten.\u003c\/p\u003e\n\u003ch3\u003eToepassing, aanbrengen \u0026amp; best practices\u003c\/h3\u003e\n\u003cp\u003eNa grondig reinigen of na producten als Degreaser of GLD Solvent zet je \u003cstrong\u003eCOLOURLOCK Blocker\u003c\/strong\u003e dun en gelijkmatig aan met een spons of via sprayen. Laat de laag volledig drogen voordat je kleur, Leather Fresh of lederverf aanbrengt. Bij extra kritische klussen kan een tweede dunne laag zinvol zijn. Belangrijk is een gelijkmatige laag, zodat de sperwerking over het hele vlak constant blijft. Daarna kun je de normale kleur- en finishopbouw doen.\u003c\/p\u003e\n\u003ch3\u003eResultaat, toepassingen \u0026amp; afbakening\u003c\/h3\u003e\n\u003cp\u003eNa het aanbrengen blijft het leeroppervlak kleurstabiel en vrij van terugkerende verkleuringen. \u003cstrong\u003eCOLOURLOCK Blocker\u003c\/strong\u003e is ideaal voor automotive leer, meubels, tassen en interieurdelen met een bekend doorslagprobleem. Het is geen reiniger, geen filler en geen Top Coat, maar een voorbereidend product dat tussen reiniging en kleur in gaat. Juist bij licht leer is de Blocker doorslaggevend voor een blijvend schoon resultaat.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVeelgestelde vragen over COLOURLOCK Blocker\u003c\/h2\u003e\n\u003ch4\u003eWanneer heb ik een blocker nodig?\u003c\/h4\u003e\n\u003cp\u003eAltijd als je verkleuringen of doorslag van kleur verwacht na het verven.\u003c\/p\u003e\n\u003ch4\u003eIs blocker zinvol bij licht leer?\u003c\/h4\u003e\n\u003cp\u003eJa, juist bij licht leer voorkomt hij dat donkere schaduwen later terugkomen.\u003c\/p\u003e\n\u003ch4\u003eKan ik daarna meteen verven?\u003c\/h4\u003e\n\u003cp\u003eJa, zodra de Blocker volledig droog is.\u003c\/p\u003e\n\u003ch4\u003eVervangt blocker de Top Coat?\u003c\/h4\u003e\n\u003cp\u003eNee. Blocker is een sperlaag, Top Coat is de finale bescherming.\u003c\/p\u003e\n\u003ch4\u003eKan blocker op alle leer?\u003c\/h4\u003e\n\u003cp\u003eOp gepigmenteerd glad leer wel. Niet voor nubuck, suède of anilineleer.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLaatst bijgewerkt: 11.12.2025 — Auteur: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56616626389327,"sku":"D1-KCX-603-1L-01","price":79.99,"currency_code":"EUR","in_stock":true},{"title":"100ml","offer_id":56616626422095,"sku":"D1-KCX-603-100ML-01","price":31.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/603-1L-01_1.png?v=1765658063"}],"url":"https:\/\/detiiling1.com\/nl\/collections\/koch-chemie-colourlock-faerben-leder-grundierung.oembed","provider":"Detailing1","version":"1.0","type":"link"}