{"title":"Lederverzegeling van COLOURLOCK","description":"\u003ch2 id=\"speakable-headline\"\u003eSlow down abrasion with COLOURLOCK leather sealant\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\n  \u003cp\u003e\u003cem\u003eWhat is COLOURLOCK leather sealant? A protective film against mechanical wear, categorized by substrate: COLOURLOCK \"Leather Shield\" for pigmented real leather, COLOURLOCK \"Artificial Leather Protector\" for faux leather and PU surfaces. Both reduce friction on entry areas, side bolsters, and steering wheel rims, slow down denim abrasion, and maintain a matte appearance.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eCOLOURLOCK leather sealant\u003c\/strong\u003e is the protective step following cleaning: a thin, flexible polymer film that rests on the topcoat and absorbs daily friction before it can reach the leather. The formulation depends on the substrate—COLOURLOCK \"Leather Shield\" for pigmented real leather, COLOURLOCK \"Artificial Leather Protector\" for faux leather and PU. The goal remains the same in both cases: less abrasion on contact surfaces, less color transfer from clothing, and no shiny spots where daily movement occurs.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eProtection exactly where leather gives out first.\u003c\/strong\u003e Wear is not distributed evenly throughout the interior. It is concentrated on the entry edge, side bolsters, steering wheel rim, and armrests—places where denim seams, rivets, and belt buckles work like fine sandpaper every time you get in or out. The polymer film absorbs this abrasion instead of the topcoat underneath.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDenim abrasion remains on the surface.\u003c\/strong\u003e Textiles release color pigments under friction; on light-colored leather, this results in a bluish haze within weeks. The sealant changes the surface energy so that pigments adhere less effectively and do not migrate into the topcoat. You will notice this: fresh color stains come off during the next mild cleaning cycle instead of becoming embedded.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMatte stays matte, without buffing.\u003c\/strong\u003e Neither product builds up shine or leaves wax-based residues behind. Apply, let flash off briefly, and you're done—the surface dries to a satin-matte finish and retains its original feel. Available in 100 ml for a complete interior and 1000 ml \/ 1 liter for detailers, workshops, and furniture.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eExpert tip from Detailing1:\u003c\/strong\u003e The most common mistake with leather sealants is the wrong timing. We regularly receive inquiries from drivers whose side bolsters are already shiny and greasy—and who now want to apply sealant to get rid of it. That is not how it works: a sealant preserves the condition it finds. If the pigment layer on the entry edge has already worn thin, the film will preserve exactly that state. The right moment is much earlier, namely while the topcoat is still intact: on a new car, after detailing, or after a repair. And always in this order: clean, let dry completely, apply a thin layer of sealant. Anyone who skips the cleaning step will trap skin oils and denim dye under the film.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSealant protects the surface, care products feed the fibers\u003c\/h3\u003e\n\u003cp\u003eA leather sealant is not a superior leather care product. It works in a different area: externally on the topcoat rather than internally in the fibers.\u003c\/p\u003e\n\n\u003cp\u003eAutomotive leather rarely dies from dryness; it dies from friction. Modern automotive leather features a pigmented PU topcoat, and it is precisely this layer that you see, touch, and wear down a little bit every time you get in. As long as it is intact, the leather looks uniform. Once it is worn through in one spot, the lighter base color underneath appears—from that point on, it is a case for color refreshing, no longer for maintenance.\u003c\/p\u003e\n\n\u003cp\u003eA friction-resistant polymer works against this: a finely cross-linked film that attaches to the topcoat and acts as a sacrificial layer between the leather and clothing. It wears away rather than cracking or building up. In other words: what wears off on your entry edge is a film you can renew in a few minutes—not the pigment layer, which can only be restored with color.\u003c\/p\u003e\n\n\u003cp\u003eThe second effect involves surface energy. A sealed surface is smoother and less attractive to dirt, skin oils, and dissolved textile dyes because they lack the microscopic roughness needed to anchor themselves. In everyday life, this means: interior cleaning is faster and requires less pressure—which in turn means less abrasion.\u003c\/p\u003e\n\n\u003cp\u003eIt is important to distinguish the lower and upper limits. A leather sealant is not a paint sealant: it does not hermetically seal the leather; it remains breathable, and subsequent care products can still reach the fibers. And it is not an impregnation—oils for smooth leather work against penetrating water and dirt, not against mechanical friction. If your concern is moisture rather than wear, you will find the right product under \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung-lederoel\"\u003eLeather Oil \u0026amp; Impregnation\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003ePore pattern and seams reveal the material\u003c\/h3\u003e\n\u003cp\u003eBefore you reach for the bottle, you need to know what you are applying it to. Real leather and faux leather look virtually identical in a modern vehicle interior from two meters away.\u003c\/p\u003e\n\n\u003cp\u003eThe first clue is the pore pattern. Faux leather has an embossed grain whose pattern repeats exactly at regular intervals—if you scan the surface, you will find the same pore arrangement multiple times. Real leather is irregular: pores of different sizes, occasional scars, and small differences in density. The second clue is temperature. Faux leather stays cool under your palm, while real leather absorbs body heat within a few seconds and releases it more slowly.\u003c\/p\u003e\n\n\u003cp\u003eThe third and most reliable clue is at the edges. Look at the underside of the seat or an exposed edge at a seam: faux leather shows a textile fabric as a backing on which the PU layer rests. Real leather has a fibrous, suede-like back without fabric structure at the cut edge.\u003c\/p\u003e\n\n\u003cp\u003eThe most common mistake concerns blends. Many vehicles combine both in the same seat: real leather on the seating surface where it is visible and tactile, and faux leather on side bolsters, backrests, and headrests, where it is cheaper and more dimensionally stable. In the equipment lists, this is noted as a leather combination or leather\/faux leather. This means for you: a single seat might require both sealants—and ironically, the side bolster that suffers the most is the faux leather surface in many cars.\u003c\/p\u003e\n\n\u003cp\u003eThe question of what is actually installed reaches us regularly, and in most cases, a look at the vehicle's equipment list clarifies it faster than any test on the seat. If you don't find it there, test in a hidden spot—under the seat cushion or on the back of the backrest—and work your way from there.\u003c\/p\u003e\n\n\u003ch3\u003eReal leather or faux leather determines the bottle\u003c\/h3\u003e\n\u003cp\u003eThe breakdown of this category follows not assortment logic, but material physics. Coated real leather and PU faux leather react differently to the same film, and that is exactly what determines the product choice.\u003c\/p\u003e\n\n\u003cp\u003eFor pigmented real leather, there is COLOURLOCK \"Leather Shield,\" found under \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung-echtleder\"\u003eReal Leather Sealant\u003c\/a\u003e. The polymer attaches specifically to the topcoat without changing breathability or haptics—the leather continues to feel soft but shows signs of friction-induced shine much later. It dries to a satin-matte finish; no buffing is necessary, and no wax-based residues are created. This is precisely why it is the product for new cars, leased vehicles, and freshly detailed interiors: it slows down greasy shine before it even develops.\u003c\/p\u003e\n\n\u003cp\u003eFor faux leather and synthetic surfaces, there is COLOURLOCK \"Artificial Leather Protector,\" found under \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung-kunstleder\"\u003eFaux Leather Sealant\u003c\/a\u003e. The film is flexible and transparent, reducing friction between the surface and clothing and making it harder for dirt, skin oils, and textile dyes to penetrate the material structure. The crucial difference from care products: the Protector is not greasy. Faux leather has no collagen fibers that could absorb fat—oils remain sticky on the surface and bind dust.\u003c\/p\u003e\n\n\u003cp\u003eBoth formulations are available in 100 ml and 1000 ml \/ 1 liter sizes. Because both are applied thinly and do not saturate the material, 100 ml is enough for a complete vehicle interior. The liter size is for detailers, upholsterers, and anyone who maintains furniture, office chairs, or bags in addition to their car—faux leather is used for far more than just vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWhat connects both products is their origin in leather repair. COLOURLOCK emerged from the Leather Center, which has been supplying upholsterers and detailers with dyes and repair materials since 1995 and is now part of Koch-Chemie. Anyone who re-dyes worn-out side bolsters daily knows exactly where and in what order leather gives out. The sealants are the answer to this: prevented repair instead of cosmetic effect.\u003c\/p\u003e\n\n\u003ch3\u003eApply thinly, let flash off, do not rub in\u003c\/h3\u003e\n\u003cp\u003eThe application determines the result, and it is unspectacular: clean, let dry completely, distribute thinly in overlapping strokes, let flash off briefly, and that's it.\u003c\/p\u003e\n\n\u003cp\u003eThe first step is the one most often skipped. A sealant on uncleaned leather traps skin oil, cosmetic residues, and denim dye already transferred under the film—making them significantly harder to remove than before. In brand-new interiors, manufacturing residues and release agents are added to the mix. For both cases, you will find the appropriate strength under \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-reinigung-lederreiniger\"\u003eLeather Cleaner\u003c\/a\u003e: mild for regular maintenance, strong for the deep cleaning before the first protective application.\u003c\/p\u003e\n\n\u003cp\u003eApply with a soft applicator or cloth, in straight, overlapping strokes rather than circles. The film should be uniform, not saturated. The classic mistake is \"rubbing it in\": the product doesn't need pressure, just distribution. After that, a short flash-off time is enough; the surface dries to a satin-matte finish and is not buffed.\u003c\/p\u003e\n\n\u003cp\u003ePerforated and ventilated seats require extra caution. Use noticeably less product there and do not push anything into the holes—what remains in the perforation will dry as a visible light spot and can only be removed with effort. A light, even application over the surface is fully sufficient.\u003c\/p\u003e\n\n\u003cp\u003eAs for the interval: for normal use every three to five months; for company cars, daily drivers, light-colored upholstery, and high-mileage drivers, more like every quarter. The fact that the film disappears is not a defect, but a function—it wears off instead of the leather. For real leather, you supplement the system from below: clean first, then seal, and at larger intervals, nourish the fibers with a \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-pflege-lederpflegemilch\"\u003eLeather Conditioning Milk\u003c\/a\u003e. Faux leather does not need this third step—there, it remains limited to cleaning and protection.\u003c\/p\u003e\n\n\u003ch3\u003eWe see the limits of this sealant in everyday life\u003c\/h3\u003e\n\n\u003cp\u003eA sealant does not repair anything. It holds the condition it finds—and that is exactly where most expectations that reach us fail.\u003c\/p\u003e\n\n\u003cp\u003eThe first borderline case is temporal. If the topcoat on the side bolster is already worn thin and shiny, the film will not compensate for this but will simply sit on top. While this slows down further wear, it does not bring back the pigment layer. From this point on, the surface needs color refreshing or repair, and the sealant only comes back into play afterward—as protection for the freshly restored result.\u003c\/p\u003e\n\n\u003cp\u003eThe second borderline case concerns stains. The film lowers surface energy and buys you time; it is not a barrier. Acidic substances like fruit juice or cola will continue to attack the topcoat if left to sit, and strongly staining liquids will penetrate over longer periods of exposure anyway. The rule remains: wipe up early, then clean mildly. Tears, holes, and broken faux leather side bolsters are a case of wear and not a case for maintenance—they belong to an upholsterer.\u003c\/p\u003e\n\n\u003cp\u003eThe third borderline case is the substrate. A film-forming sealant has no place on open-pored aniline leather or nubuck: it alters the look and feel there because these leathers work without a topcoat and absorb liquids directly. Alcantara, microfiber, and fabric upholstery are also their own case and require \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung-textilversiegelung\"\u003eTextile Sealant\u003c\/a\u003e instead of a leather product.\u003c\/p\u003e\n\n\u003cp\u003eFrom our everyday life, there is another classification that rarely anyone voices: the areas where a sealant actually changes something are countable. Entry edge, side bolster, steering wheel rim, armrest, and in family cars, the back of the front seats. The rest of the interior ages so slowly that the difference between sealed and unsealed is barely visible over years. If you want to be economical, then not with the quantity per application, but with the surface area.\u003c\/p\u003e\n\n\u003ch3\u003eWhich sealant your interior really needs\u003c\/h3\u003e\n\n\u003cp\u003eThe fastest way to decide is through two questions: what material is installed, and how much topcoat is still left on the contact surfaces?\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle has pigmented real leather in good condition—a new car, a young used car, a freshly detailed interior—then COLOURLOCK \"Leather Shield\" from the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung-echtleder\"\u003eReal Leather Sealant\u003c\/a\u003e section is the right product. The benefit is greatest here because the pigment layer is still complete, and the film relieves it from the very beginning.\u003c\/p\u003e\n\n\u003cp\u003eIf side bolsters, backrests, or the entire upholstery consist of faux leather, reach for COLOURLOCK \"Artificial Leather Protector\" from the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung-kunstleder\"\u003eFaux Leather Sealant\u003c\/a\u003e section. This is especially worthwhile for light-colored upholstery and for anyone who wears a lot of denim: color transfer is the number one problem on faux leather, long before abrasion becomes visible. And for a leather combination, simply apply both—seating surface according to real leather logic, bolsters and backrest according to faux leather logic.\u003c\/p\u003e\n\n\u003cp\u003eIf the leather is already dry, hard, or dull, the work begins one step earlier: clean first, then nourish the fibers via the \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-pflege-lederpflegemilch\"\u003eLeather Conditioning Milk\u003c\/a\u003e, and use the protective film at the end. In this order, each step meshes into the next. Conversely, the film does not block the care products, but it makes them unnecessary. All other protective products from the brand can be found one level higher: \u003ca href=\"\/nl\/collections\/koch-chemie-colourlock-versiegelung\"\u003eBack to Sealant \u0026amp; Impregnation\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eAnd the thought that carries the whole category: you cannot decide whether your leather gets friction. Every drive, every entry, every denim seam delivers it. You can only decide what wears down in the process—the protective film or the topcoat underneath. The film is renewed in a few minutes. The topcoat is not.\u003c\/p\u003e\n","products":[{"product_id":"koch-chemie-colourlock-leather-shield-pflegemittel","title":"COLOURLOCK \"Leather Shield\" verzorgingsmiddel voor nieuw leer ter bescherming tegen slijtage","description":"\u003ch2\u003eMaximale slijtagebescherming voor nieuw leer dankzij COLOURLOCK × Koch-Chemie Leather Shield\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eHoe beschermt COLOURLOCK × Koch-Chemie Leather Shield nieuw leer? — Een onzichtbaar wrijvingsbeschermend polymeer legt zich als een fijne beschermfilm op het leer, vermindert slijtage op stuur, instaplijsten en zijwangen en houdt nieuw leer langer gelijkmatig mat en schoon.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK × Koch-Chemie Leather Shield\u003c\/strong\u003e is jouw professionele verzorgingsmiddel als je fabrieksnieuw of zo goed als nieuw glad leer langdurig wilt beschermen tegen slijtage, scheurtjes, glimplekken en kleurverlies. De formule komt uit de COLOURLOCK-ledertechnologie, gecombineerd met de systeemchemie van Koch-Chemie — perfect voor nieuwe auto's, leaseretours en gedetailleerde interieurwerk. Leather Shield voorkomt de typische vroege veroudering op zwaarbelaste plekken en geeft een prettig, mat oppervlak met een natuurlijke grip.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLangdurige wrijvingsbescherming\u003c\/strong\u003e – De polymeerfilm beperkt mechanische slijtage op zijwangen, stuur en instapzones. Het leer blijft langer vorm- en kleurvast omdat micro-slijtage flink afneemt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlansremmende werking\u003c\/strong\u003e – Juist nieuw leer krijgt bij gebruik snel een ongewenste glans. Leather Shield houdt de matte look en voorkomt vettige plekken, zonder het oppervlak af te sluiten of plakkerig te maken.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetheid \u0026amp; makkelijk onderhoud\u003c\/strong\u003e – Doordat de oppervlakte-energie verandert, hecht vuil minder. De latere interieurreiniging gaat sneller en zachter, vooral samen met een milde lederreiniger.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBeschermtechnologie voor nieuw leer \u0026amp; oppervlaktegedrag\u003c\/h3\u003e\n\u003cp\u003eHet hart van \u003cstrong\u003eLeather Shield\u003c\/strong\u003e is een fijn vernet polymeer dat zich gericht aan gepigmenteerd glad leer hecht, zonder de ademende werking of de grip aan te tasten. In de praktijk betekent dat: je leer gedraagt zich nog gewoon natuurlijk, voelt zacht aan, maar laat duidelijk minder wrijvingsglans en micro-slijtage zien. Vooral bij moderne autoleders met een PU-toplaag werken dagelijks in- en uitstappen, kledingranden, klinknagels of riemuiteinden als schuurpapier — de polymeerfilm werkt hier als opofferende beschermlaag. Volgens de fabrieksdata is het recept zo opgezet dat het noch opbouwt noch scheurt, maar gelijkmatig afslijt en bij behoefte wordt bijgewerkt. Klassieke fouten zoals stevig \"inmasseren\" houd je weg: Leather Shield werkt het best als je het dun, gelijkmatig en volledig uitgedampt aanzet.\u003c\/p\u003e\n\u003ch3\u003eLeervoorbereiding \u0026amp; de beste manier om het aan te zetten bij het detailen\u003c\/h3\u003e\n\u003cp\u003eVoor maximale prestaties van \u003cstrong\u003eLeather Shield\u003c\/strong\u003e is een grondige voorbereiding doorslaggevend. Nieuw of zo goed als nieuw leer reinig je eerst met een milde lederreiniger om productieresten, lichte huidvetten en micro-vervuiling eruit te halen. Het product zet je aan met een zachte applicator in rechte, overlappende banen tot er een gelijkmatige film ontstaat. Na een korte uitdamptijd droogt het leer zijdemat op; nabuffen is meestal niet nodig omdat het product geen wasresten achterlaat. Vooral in de detailzone — stuur, consoleleer, zijwangen — loont precies werken. Samen met regelmatige milde reiniging blijft de bescherming stabiel. Voor zwaar gereden auto's zoals bedrijfswagens of daily drivers is een kwartaalbeurt slim, want die plekken pakken meer mechanische belasting.\u003c\/p\u003e\n\u003ch3\u003eResultaten, houdbaarheid \u0026amp; typische toepassingen\u003c\/h3\u003e\n\u003cp\u003eNadat je \u003cstrong\u003eLeather Shield\u003c\/strong\u003e hebt aangezet, blijft de look van het leer origineel mat en vrij van de vettige glans die juist bij donkere interieurs snel zichtbaar wordt. De houdbaarheid hangt logischerwijs af van gebruik en materiaal, want het product wordt als beschermlaag mechanisch afgesleten. In alledaagse auto's komen de voordelen het sterkst naar voren: gelijkmatige slijtage, minder plooivorming en glans die veel later opduikt op zijwangen en stuur. Voor leaseauto's is Leather Shield bijna verplicht, omdat het zichtbare veroudering afremt en de interieuruitstraling tot de inlevering stabiel houdt. Ook in professioneel detailen overtuigt het product als onderdeel van een systematisch lederverzorgingsproces, want het is niet siliconenhoudend en niet oververzorgend, en past perfect bij milde reinigers en latere conditionerverzorging.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVeelgestelde vragen over COLOURLOCK × Koch-Chemie Leather Shield\u003c\/h2\u003e\n\u003ch4\u003eKan ik Leather Shield ook op ouder leer gebruiken?\u003c\/h4\u003e\n\u003cp\u003eJa, maar oudere vlakken reinig je vooraf grondig en frist je zo nodig licht op. Bij sterk uitgedroogd leer helpt een conditioner extra. Optimaal werkt het product echter op zo goed als nieuwe oppervlakken.\u003c\/p\u003e\n\u003ch4\u003eHoe vaak moet ik Leather Shield bijwerken?\u003c\/h4\u003e\n\u003cp\u003eBij normaal gebruik ongeveer elke drie tot vijf maanden. Zwaar belaste plekken zoals instapwangen of sturen hebben baat bij een vaker bijwerken.\u003c\/p\u003e\n\u003ch4\u003eOntstaat er een vettige glans door het product?\u003c\/h4\u003e\n\u003cp\u003eNee. Leather Shield is uitgesproken matterend en houdt het natuurlijke oppervlak, zonder op te bouwen of te gaan glimmen.\u003c\/p\u003e\n\u003ch4\u003eIs het product geschikt voor geperforeerde stoelen?\u003c\/h4\u003e\n\u003cp\u003eJa, zolang je het dun aanzet en niet in de perforatie \"masseert\". Een lichte, gelijkmatige laag is volledig genoeg.\u003c\/p\u003e\n\u003ch4\u003eKan ik na Leather Shield nog een conditioner gebruiken?\u003c\/h4\u003e\n\u003cp\u003eJa. Eerst reinigen, dan Leather Shield als wrijvingsbescherming, daarna een conditioner voor soepelheid. Zo krijg je bescherming en verzorging in één afgestemd systeem.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLaatst bijgewerkt: 02-12-2025 — Auteur: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56320174555471,"sku":"D1-KCX-479-1L-01","price":40.99,"currency_code":"EUR","in_stock":true},{"title":"100ml","offer_id":56320174621007,"sku":"D1-KCX-479-100ML-01","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/479-1L-01_1.png?v=1762115755"},{"product_id":"koch-chemie-colourlock-artificial-leather-protector-kunstleder-versiegelung","title":"COLOURLOCK \"Artificial Leather Protector\" versiegeling voor kunstleer","description":"\u003ch2\u003eCOLOURLOCK Artificial Leather Protector — bescherming \u0026amp; versiegeling voor kunstleer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWaar gebruik je COLOURLOCK Artificial Leather Protector voor? — De versiegeling beschermt kunstleer tegen slijtage, kleurafgifte en vroegtijdige veroudering, vermindert wrijving en maakt het schoonhouden een stuk makkelijker.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Artificial Leather Protector\u003c\/strong\u003e is een versiegeling die speciaal voor kunstleer en synthetische lederoppervlakken is gemaakt. Hij legt een onzichtbare beschermlaag aan die het materiaal beschermt tegen slijtage, kleurafgifte, vuil en veroudering. Vooral modern kunstleer in auto's, meubels en de fitness- en lifestylewereld krijgt het zwaar te verduren, dus zo'n bescherming verdient zich snel terug. De Protector houdt de originele look intact, raakt de glans of het gevoel niet aan en verlengt de levensduur van het oppervlak merkbaar.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffectieve slijtagebescherming\u003c\/strong\u003e – Vermindert mechanische slijtage en materiaalmoeheid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBescherming tegen kleurafgifte\u003c\/strong\u003e – Houdt jeans-afgifte en kleurmigratie tegen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnderhoudsvriendelijk oppervlak\u003c\/strong\u003e – Vuil hecht minder, schoonmaken gaat makkelijker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBeschermfilm-technologie \u0026amp; hoe het werkt\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eArtificial Leather Protector\u003c\/strong\u003e vormt een flexibele, transparante beschermfilm op het kunstleer. Die film vermindert de wrijving tussen het oppervlak en je kleding of huid, en werkt zo direct tegen slijtage en vroegtijdige afbraak. Tegelijk maakt de versiegeling het moeilijker voor vuil, kleurstoffen en huidvetten om in de materiaalstructuur te trekken. Anders dan klassieke onderhoudsmiddelen vet de Protector niet, maar beschermt hij actief de coating van moderne PU- en kunstledermaterialen.\u003c\/p\u003e\n\u003ch3\u003eAanbrengen, hoe je hem aanzet \u0026amp; best practices\u003c\/h3\u003e\n\u003cp\u003eVoordat je begint, moet het kunstleer grondig gereinigd en helemaal droog zijn. Je brengt \u003cstrong\u003eArtificial Leather Protector\u003c\/strong\u003e dun en gelijkmatig aan met een zachte doek of applicator en laat hem daarna even afluchten. De versiegeling trekt residuvrij in en laat geen strepen na. Op zwaar belaste vlakken loont het om de bescherming regelmatig op te frissen, zodat hij langdurig blijft werken. Hij werkt zowel op nieuw als op al gebruikt kunstleer.\u003c\/p\u003e\n\u003ch3\u003eResultaten, waar het past \u0026amp; wat je eraan hebt\u003c\/h3\u003e\n\u003cp\u003eAls hij er eenmaal op zit, is het kunstleer beter beschermd tegen slijtage, kleurafgifte en vuil en blijft het langer mooi. \u003cstrong\u003eArtificial Leather Protector\u003c\/strong\u003e is ideaal voor autostoelen, deurpanelen, armleuningen, meubels, bureaustoelen, fitnessapparatuur, tassen, stoelen en nog veel meer kunstlederoppervlakken. Het is geen reiniger en geen reparatie, maar een preventieve maatregel die slijtage vroeg afvangt en de levensduur duidelijk verlengt.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVeelgestelde vragen over COLOURLOCK Artificial Leather Protector\u003c\/h2\u003e\n\u003ch4\u003eIs de Protector alleen voor kunstleer geschikt?\u003c\/h4\u003e\n\u003cp\u003eJa, hij is speciaal voor kunstleer en synthetische materialen ontwikkeld.\u003c\/p\u003e\n\u003ch4\u003eVerandert het product de glans of het gevoel?\u003c\/h4\u003e\n\u003cp\u003eNee, de look en de grip blijven origineel.\u003c\/p\u003e\n\u003ch4\u003eHoe vaak moet ik de versiegeling vernieuwen?\u003c\/h4\u003e\n\u003cp\u003eAfhankelijk van gebruik om de paar maanden, bij zwaar belaste vlakken vaker.\u003c\/p\u003e\n\u003ch4\u003eKan ik de Protector op nieuw kunstleer gebruiken?\u003c\/h4\u003e\n\u003cp\u003eJa, juist nieuw kunstleer krijgt zo vroeg bescherming tegen slijtage.\u003c\/p\u003e\n\u003ch4\u003eVervangt de Protector het schoonmaken?\u003c\/h4\u003e\n\u003cp\u003eNee, hij vult het aan. Eerst maak je schoon, daarna bescherm je.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLaatst bijgewerkt: 11.12.2025 — Auteur: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56616648081743,"sku":"D1-KCX-601-1L-01","price":39.99,"currency_code":"EUR","in_stock":true},{"title":"100ml","offer_id":56616648114511,"sku":"D1-KCX-601-100ML-01","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/601-1L-01_1.png?v=1765658617"}],"url":"https:\/\/detiiling1.com\/nl\/collections\/koch-chemie-colourlock-versiegelung-lederversiegelung.oembed","provider":"Detailing1","version":"1.0","type":"link"}