{"product_id":"flex-klett-teller-m14-gedaempft","title":"Backing Plate \"M14\" (Cushioned)","description":"\u003ch2\u003eFLEX cushioned backing plate M14 – Precise pressure control for flawless polishing\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does a cushioned backing plate with an M14 thread actually do? A cushioned plate spreads pressure evenly across the pad, takes out the hot spots and gives you more controlled polishing, sanding or sealing – especially on rotary machines with an M14 fitting.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX backing plate \"M14\" (Cushioned)\u003c\/strong\u003e is the foundation for controlled, precise polishing. In pro detailing the backing plate is what decides how evenly pressure gets transferred, how stable a pad runs and how precisely you can work the paint. That's exactly where this FLEX plate comes in: a well thought-out cushion paired with a solid hook-and-loop connection gives you maximum control, whether you're correcting, finishing or working in a sealant.\u003c\/p\u003e\n\u003cp\u003eIt's built on a sturdy base plate with an M14 thread – the standard fitting on most rotary polishers. On top sits an elastic cellular-rubber cushion that soaks up pressure spikes and lets the pad run smoother. The pad sits more stable that way, which makes a real difference on sensitive paint or precise correction work. According to the manufacturer, around 12 mm of cellular rubber keeps pressure spread evenly when you sand, polish and seal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven pressure thanks to the cellular-rubber cushion\u003c\/strong\u003e\u003cbr\u003eThe built-in cushion evens out pressure differences and helps the pad run consistently. That cuts the risk of hammering one spot too hard and lets you work the paint more precisely – especially under rotary motion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid hook-and-loop grip that holds the pad\u003c\/strong\u003e\u003cbr\u003eThe quality hook-and-loop keeps pads locked on reliably. Even through longer polishing passes the pad stays cleanly centred and runs smooth – key for controlled defect correction and a clean finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM14 thread for pro polishing machines\u003c\/strong\u003e\u003cbr\u003eThe classic M14 fitting is standard on most rotary polishers. So the plate bolts straight on and gives you a solid link between machine and pad.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eCushioned backing plate with cellular rubber for controlled pressure spread\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003ecushioned backing plate\u003c\/strong\u003e is far more than just an adapter for your pads – it's the link between the machine and the paint surface. On the FLEX backing plate a cellular-rubber layer about 12 mm thick does that job. Cellular rubber has a closed structure with plenty of give, so it soaks up pressure spikes and passes the machine's movement onto the pad more evenly. In practice that means the pad follows contours better while you keep a stable working surface.\u003c\/p\u003e\n\u003cp\u003eOn rotary polishers in particular this cushioning really matters. The direct rotary motion dumps a lot of energy into the paint. Without a cushion to keep it in check, the pressure works on one spot and you get uneven polish coverage or faster pad wear. The cellular rubber spreads that energy out evenly. The pad then glides over the surface more controlled and lets you correct more precisely.\u003c\/p\u003e\n\u003cp\u003eFor detailers it comes down to one thing: more control over the finish. On sensitive clear coats or on finishing passes where you want maximum consistency, a cushioned plate helps you run the machine smoother and pull off an even result.\u003c\/p\u003e\n\u003ch3\u003eM14 fitting for rotary polishers and pro polishing machines\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eM14 fitting\u003c\/strong\u003e has been one of the established standards in pro rotary polishing for years. Plenty of machines run this thread size because it gives a particularly stable, low-vibration link between machine and accessory. On the FLEX backing plate the thread is built straight into the base plate, so power transfer stays secure.\u003c\/p\u003e\n\u003cp\u003eFor you that mostly means reliability day in, day out. The plate sits tight on the polisher's spindle and passes the rotary motion onto the pad with no play. That gives you precise handling and a steady power transfer – an important factor when you're working with different polishes, pads or pressure levels.\u003c\/p\u003e\n\u003cp\u003eAnother upside of this build is how universal it is. M14 is widespread across the pro polishing world, so this plate pairs up with loads of rotary machines. That makes it a tough, long-lasting option for the pro detailing studio as much as for serious enthusiasts.\u003c\/p\u003e\n\u003ch3\u003eØ150 mm, Ø125 mm and Ø75 mm – the right plate size for every polishing job\u003c\/h3\u003e\n\u003cp\u003ePicking the right plate size is key for efficiency and precision when you're working paint. That's why the FLEX backing plate comes in three diameters: Ø150 mm, Ø125 mm and Ø75 mm. Each one is tuned to certain jobs and backs a different polishing strategy.\u003c\/p\u003e\n\u003cp\u003eThe 150 mm version is the classic pick for big panels. Bonnet, doors or roof get done efficiently with larger pads because you cover more ground per pass. For a lot of detailers it's the go-to size for defect correction on large body panels.\u003c\/p\u003e\n\u003cp\u003eThe 125 mm version is a good balance of control and coverage. It suits areas with moderate contours, or when you want a bit more precision without slowing the pace too much. Plenty of pros use this size as their all-round plate.\u003c\/p\u003e\n\u003cp\u003eThe compact 75 mm plate, on the other hand, comes into its own wherever big pads just don't fit. Tight body sections, bumpers, pillars or tricky contours get worked far more precisely at this size. For detail work or spot correction a small plate is often the smarter call.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"FLEX","offers":[{"title":"Ø150mm \"535703\" (BP-M D150 M14)","offer_id":57225079619919,"sku":"D1-FLEX-535703","price":35.68,"currency_code":"USD","in_stock":false},{"title":"Ø125mm \"535704\" (BP-M D125 M14)","offer_id":57225079652687,"sku":"D1-FLEX-535704","price":29.2,"currency_code":"USD","in_stock":true},{"title":"Ø75mm \"535705\" (BP-M D75 M14)","offer_id":57225091547471,"sku":"D1-FLEX-535705","price":24.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/flex-klett-teller-m14-gedaempft.png?v=1773342069","url":"https:\/\/detiiling1.com\/products\/flex-klett-teller-m14-gedaempft","provider":"Detailing1","version":"1.0","type":"link"}