{"product_id":"gyeon-q2m-rotary-eccentric-heavy-cut-polierpad","title":"Q²M Heavy Cut polishing pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eMaximum cutting power on the pad – GYEON Q²M Heavy Cut polishing pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Heavy Cut polishing pad? The GYEON Q²M Heavy Cut polishing pad is a hard correction pad for rotary and DA machines – built for aggressive defect correction with Q²M Compound+ or other heavy-cut compounds at maximum cut.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen you're chasing deep scratches, heavy swirls or badly oxidised paint, the pad matters just as much as the compound. The \u003cstrong\u003eGYEON Q²M Heavy Cut polishing pad\u003c\/strong\u003e is the most aggressive foam pad in the GYEON polishing line-up – a hard cell structure that pulls every bit of cut out of the compound and still delivers on hard paint or extreme defects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard foam cell structure for maximum compound activation.\u003c\/strong\u003e How hard the pad is decides how aggressively the abrasives in the compound work the paint. The Heavy Cut pad puts maximum pressure into the surface and breaks the abrasives down fully – the highest correction power you get out of a foam pad.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast compound release so you keep moving.\u003c\/strong\u003e The Q²M Heavy Cut pad takes compound up quickly and lays it down evenly on the panel. The open-cell structure stops the compound drying out in the pad, so the cut stays constant right through the set.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRuns on both rotary and DA.\u003c\/strong\u003e The Q²M Heavy Cut pad works on both machine types – on the rotary you get the full cut for extreme defects, on the DA you keep serious correction with a lot more margin for error if you're not a veteran yet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Always start the Q²M Heavy Cut pad with a test spot somewhere out of sight – especially on soft paint (a lot of imports). Push the Heavy Cut pad too hard and you take off more clear than you meant to. Run speed 6–8 on the DA, 1000–1500 rpm on the rotary. After the correction step with Q²M Compound+ you finish with \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e and a soft pad, no shortcuts.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhere the Heavy Cut pad earns its keep\u003c\/h3\u003e\n\u003cp\u003eYou grab the Q²M Heavy Cut pad when: deep scratches won't come out fully with a medium compound, the paint is oxidised and flat (cars that went years without any care), stubborn holograms from a bad earlier polish have to go, or a very hard paint (some BMW and Ferrari finishes) simply needs more bite. Heavy Cut pad + \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e is the combo for maximum correction – knowing full well that finishing with \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e + a soft pad always has to follow.\u003c\/p\u003e\n\n\u003ch3\u003eThe pad sequence for a full paint correction\u003c\/h3\u003e\n\u003cp\u003eOn badly defected paint we run a three-step pad sequence: Heavy Cut pad + \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e for the heavy correction, \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e to refine and pull out the holograms the Compound+ left behind, \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the final gloss. Before the coating: \u003ca href=\"\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e as a last IPA wipe-down.\u003c\/p\u003e\n\n\u003ch3\u003eLooking after the Heavy Cut pad\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Heavy Cut pad is a tough bit of kit that survives plenty of jobs if you look after it. After every polishing session, clean it with a pad brush under running water and rinse every last bit of compound out. Let it dry lying flat. Heavy cut pads normally last longer than softer ones, because the firmer structure doesn't collapse as fast. Still: the moment the pad stops cutting evenly or starts lifting off the backing, replace it.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: the Q²M Heavy Cut pad for serious correction work\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Heavy Cut polishing pad is the tool of choice for keen detailers and pros working on extreme defects or badly neglected paint. As a complete pad set we'd grab: Q²M Heavy Cut + \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish\u003c\/a\u003e pad, paired with the GYEON polishing kit of \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e and \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the best results.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335256088911,"sku":"D1-GYEON-Q2MRHC80","price":21.74,"currency_code":"USD","in_stock":false},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335260021071,"sku":"D1-GYEON-Q2MRHC145","price":20.39,"currency_code":"USD","in_stock":false},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337502204239,"sku":"D1-GYEON-Q2MEHC80","price":21.74,"currency_code":"USD","in_stock":false},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337502237007,"sku":"D1-GYEON-Q2MEHC146","price":20.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-heavy-cut-polierpad.png?v=1774633860","url":"https:\/\/detiiling1.com\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad","provider":"Detailing1","version":"1.0","type":"link"}