{"product_id":"sonax-profiline-exzenterpad-medium-polierpad","title":"SONAX PROFILINE ExzenterPad medium polishing pad","description":"\u003ch2\u003eMedium cut, full control — the SONAX PROFILINE ExzenterPad medium in real use\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat sets a medium-cut polishing pad apart from a soft or hard one? A medium-cut pad — like the ExzenterPad medium — corrects light to moderate paint defects on DA polishers without overdoing the cut, and shifts heat away nicely.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIf you've ever polished with the wrong pad, you know how it ends: either you cut too much and the paint overheats, or there isn't enough bite and the scratches stay put. The \u003cstrong\u003eSONAX PROFILINE ExzenterPad medium\u003c\/strong\u003e is built for exactly the zone where most correction happens — light swirls, fine scratches, moderate oxidation and holograms that finishing pads can no longer touch, but that don't need an aggressive cutting pad either. The medium-cut foam profile gives you the room to correct efficiently without losing your grip on how much you're removing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium-cut foam profile for precise paint correction.\u003c\/strong\u003e The open-pore foam structure of the ExzenterPad medium builds enough cut with the right polish to clear swirls, holograms and fine scratches. The removal stays controllable — you correct exactly where you want without over-stressing the paint surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficient heat shedding through open-cell foam.\u003c\/strong\u003e Polishing on DA orbitals generates friction heat, and closed-pore pads trap it, which can lead to heat spots or paint damage. The open-cell foam of the ExzenterPad medium draws heat away evenly and protects sensitive clear coats.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile size choice for different working areas.\u003c\/strong\u003e With Ø125 mm for precise work in tight spots and Ø150 mm for large panels, the ExzenterPad medium gives you the flexibility a pro day calls for. Both sizes fit standard hook-and-loop backing plates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Before the first run, drop 3–4 pea-sized blobs of polish onto the pad and spread them across a panel at low speed before you start correcting — what we call \"priming\" the pad. A fresh PROFILINE ExzenterPad medium drinks up more polish on the first pass; only on the second pass does it show its full cutting power. After every panel, blow the pad out with a pad brush or a pad cleaner to clear polish residue — that stretches the pad's life by a lot.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eOpen-cell foam and medium cut — how the ExzenterPad medium works\u003c\/h3\u003e\n\n\u003cp\u003eThe pad you pick decides how much time and how many passes a correction takes. Too soft a pad doesn't build enough pressure to pull scratches out of the clear coat; too hard a pad leaves a faint hologram pattern behind that you then have to chase off with a finishing pad in another pass. Understanding pad mechanics saves you real time and abrasive day-to-day.\u003c\/p\u003e\n\n\u003cp\u003eA raw foam blank and a finished pad are not the same thing. What looks at first glance like a simple piece of foam is the result of a deliberate material choice: pore size, foam hardness and cell structure together decide how much abrasive the pad takes up, how it releases it, and how fast it heats up. The \u003cstrong\u003eSONAX PROFILINE ExzenterPad medium\u003c\/strong\u003e uses an open-cell polyurethane foam of medium hardness. The open cell build means polish spreads evenly through the pad and meters out onto the paint — a steady supply that stops the pad running dry and keeps the abrasive working consistently.\u003c\/p\u003e\n\n\u003cp\u003eA pad's cut comes from how foam hardness, surface texture and pore structure play together. Soft pads compress a lot, have more contact with the paint but less pressure per point — ideal for finishing. Hard pads barely compress, build high local pressure and therefore more cut. The medium pad sits in between: it compresses in a controlled way, builds pressure steadily, and still spreads polish evenly. In practice that means you can clear swirls and holograms in one or two passes with the ExzenterPad medium without necessarily needing a separate finishing pass afterwards — as long as you match the right polish to it.\u003c\/p\u003e\n\n\u003cp\u003eChoosing between Ø125 and Ø150 mm depends on the working area and the machine. Ø125 mm is the standard size for DA orbitals with a 5 mm throw and works on every body section. Ø150 mm lets you cover more ground on large, flat panels like the bonnet or roof, but it needs a machine with the power headroom to back it. If you run both sizes, you can switch deliberately between detail work and large-area polishing.\u003c\/p\u003e\n\n\u003cp\u003eThe hook-and-loop backing on the pad is made for standard backing plates. The Velcro quality on the PROFILINE line holds reliably even through several hours of continuous use — the pad sits tight, doesn't spin out, and won't peel off on its own even on a damp, greasy surface. With cheaper pads that's one of the most common headaches day-to-day.\u003c\/p\u003e\n\n\u003ch3\u003eUsing a DA polishing pad right — step by step with the ExzenterPad medium\u003c\/h3\u003e\n\n\u003cp\u003eBefore your first polishing pass, a quick paint check pays off. Heavily soiled paint should be decontaminated before polishing — an iron remover binds fallout, and a clay bar product pulls off bonded contamination that would otherwise act as grinding grit during polishing. On clean, decontaminated paint the ExzenterPad medium works more efficiently: the abrasive particles in the polish bite straight into the clear coat instead of burning energy loosening surface dirt.\u003c\/p\u003e\n\n\u003cp\u003eDA orbitals work with a combined rotation-and-orbital motion — that makes them more forgiving than rotaries and easier to get into for beginners, but you still need the right technique. Your speed setting drives how much cut the ExzenterPad medium actually develops. For medium correction work, a speed between 4,000 and 5,500 revolutions per minute is the sweet spot. Lower speeds cut heat build-up but give less bite; higher speeds speed up the correction but raise the risk of heat spots on repeated overlaps.\u003c\/p\u003e\n\n\u003cp\u003eAlways pick a test panel first — ideally a low-key spot on the car, like the lower door area or a less exposed corner of the roof. Lay the polish straight onto the pad, not onto the paint. Start at low speed and spread the polish across the panel without leaning in, then bring the speed up for the actual correction pass. Overlapping passes of 30–40 % give an even result without streaks. Two to three passes are usually enough for moderate swirls; deeper scratches call for extra passes or a switch to the ExzenterPad hart.\u003c\/p\u003e\n\n\u003cp\u003eAfter the pass, the residue pattern of the polish becomes your indicator: when the abrasive film has broken down evenly and is almost fully worked in, the pad has done its job. Clumpy or uneven residue points to too much polish or too low a speed. The PROFILINE ExzenterPad medium cleans up after use with warm water and pad wash, and is reusable once dry. Pros recommend sorting pads by polish type and never switching between abrasive and finishing products on the same pad.\u003c\/p\u003e\n\n\u003ch3\u003eCorrecting paint defects — when the ExzenterPad medium is the right call\u003c\/h3\u003e\n\n\u003cp\u003ePaint care isn't only about looks — it's about holding value. A car with corrected, sealed paint scores measurably better at lease return or resale than one with untouched wear marks. Polishing with a DA orbital and the ExzenterPad medium is, for high-mileage drivers and fleets, an investment that pays back at the next valuation.\u003c\/p\u003e\n\n\u003cp\u003eThe ExzenterPad medium is the all-rounder in the polishing-pad line-up — it covers the zone you reach for most often in day-to-day detailing. Cars with normal wear that get washed regularly build up a fine swirl pattern over months, picked up from automatic washes, microfibre towels or wash sponges carrying grit. That exact surface depth — usually 1 to 3 microns — is the target zone of the ExzenterPad medium. It removes enough to drop below the scratch depth without cutting into deeper layers of paint.\u003c\/p\u003e\n\n\u003cp\u003eMore heavily damaged paint with deep scratches, oxidation damage or baked-in water spots that don't bridge under the fingernail test need the ExzenterPad hart or a rotary pass. An honest read before you start polishing saves time: if you can feel a scratch with your fingernail, it sits in the primer or at the edge of the clear coat — the ExzenterPad medium won't fully clear it. As a rule of thumb: what the nail glides over without catching, the medium pad can correct.\u003c\/p\u003e\n\n\u003cp\u003eTemperature plays a part too: on cold paint below 10 °C the foam stiffens up — the pad compresses less and the contact pressure climbs. On hot summer days outdoors, on the other hand, the pad goes softer and cuts more. Factor those variables into your first test panel so you can read the result before you polish whole panels.\u003cbr\u003e\nOn freshly painted cars, new vehicles with fine transport scratches, or after a chemical decon with a clay bar product, the ExzenterPad medium is your first choice for paint correction too. It gives the paint enough cut for a visible improvement without the risk of grinding through fresh paint that hasn't fully cured. After correcting with the ExzenterPad medium, a closing finishing pass with the \u003ca href=\"\/products\/sonax-profiline-exzenterpad-weich-125-polierpad\"\u003eSONAX PROFILINE ExzenterPad weich\u003c\/a\u003e is worth it, to clear the last micro-scratches from the polishing pass and leave the paint mirror-clear.\u003c\/p\u003e\n\n\u003ch3\u003eExzenterPad medium vs hart vs SchaumPad — which pad when?\u003c\/h3\u003e\n\n\u003cp\u003ePad choice in practice isn't a matter of taste, it's a matter of paint condition and the result you're after. The \u003cstrong\u003eSONAX PROFILINE ExzenterPad medium\u003c\/strong\u003e holds the middle: more cut than a finishing pad, more mercy than a cutting pad. The ExzenterPad hart suits pronounced scratches, oxidation and heavy swirls — its denser foam core builds enough pressure with a high-abrasive polish for deep material removal. The downside: the finishing work afterwards is heavier, because the hard pad leaves finer holograms behind.\u003c\/p\u003e\n\n\u003cp\u003eCompared with the \u003ca href=\"\/products\/sonax-profiline-exzenterpad-hart-polierpad\"\u003eSONAX PROFILINE ExzenterPad hart\u003c\/a\u003e, the medium pad can fold the first correction pass straight into finishing in a two-stage workflow — when the polish matches the pad's cut. That saves time and is plenty for cars in normal condition. If you work with a one-step polish like the \u003ca href=\"\/products\/sonax-profiline-np-03-06-hochglanz-politur-finish\"\u003eSONAX PROFILINE NP \"03-06\"\u003c\/a\u003e, the ExzenterPad medium is the ideal carrier foam: the NP \"03-06\" develops its cut and its finishing properties best on medium-cut pads and leaves a high gloss after a single pass.\u003c\/p\u003e\n\n\u003cp\u003eAgainst the SchaumPads from the PROFILINE line, the ExzenterPad stands apart through its specific tuning for DA machines. SchaumPads can in principle be run on orbitals too, but their material spec is built around rotary use. The ExzenterPad medium is dialled in with a DA orbital — the rebound character of the foam matches the machine's motion frequency.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's for, combinations and buying advice for the ExzenterPad medium\u003c\/h3\u003e\n\n\u003cp\u003eThe medium polishing pad from the PROFILINE line is built for professional detailers who work regularly with DA orbitals and need a dependable correction pad for the everyday bulk of cars. For detailing beginners with a DA machine it's the right starter pad too, because it's more forgiving than a hard cutting pad. The risk of grinding through the paint with the wrong technique is clearly lower with the medium pad than with an aggressive cutting pad.\u003c\/p\u003e\n\n\u003cp\u003eIf you work on different vehicle types regularly, you'll benefit from a structured pad system. Dark cars and clear coats with thin film thickness call for more of a feel — here the ExzenterPad medium is often the safe bet, because it keeps the removal controllable. On light colours and paint with good film thickness, a hard pad on the first pass can make sense too, to clear deep scratches faster. A careful film-thickness check with a paint depth gauge before polishing is standard at a professional level.\u003c\/p\u003e\n\n\u003cp\u003eFor professional use, the pack options of 15 pieces (Ø125 mm) or 10 pieces (Ø150 mm) are worth it. Detailers polishing several cars a day change the pad at the latest after two or three cars — a fresh pad gives consistently better results than a saturated one. With the 15-piece set you have enough pads for a working day without washing in between. That saves not just time but polish too, because a fresh pad takes up the abrasive more efficiently and releases it more evenly.\u003c\/p\u003e\n\n\u003cp\u003eFor single users with the odd polishing job, the single pack is the right pick: cared for well and cleaned after every use, a PROFILINE ExzenterPad medium lasts many jobs. The combo of ExzenterPad medium for the correction pass and ExzenterPad weich for the closing finishing pass is the standard two-stage workflow Detailing1 recommends for normal everyday cars. As a verified SONAX dealer, Detailing1 stocks the PROFILINE ExzenterPad medium permanently in all sizes and pack quantities. For shops with high polishing volume, combined pad sets are worth a look too: a stock of medium and soft pads covers the whole two-stage workflow without having to reorder mid-job. On request, Detailing1 gives advice on pad rotation strategy for different vehicle classes and polish types.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"Ø125 mm – 1 piece","offer_id":57345292337487,"sku":"D1-SNX-4986000","price":23.03,"currency_code":"USD","in_stock":true},{"title":"Ø125 mm – 15 pieces","offer_id":57345292370255,"sku":"D1-SNX-4987000","price":149.21,"currency_code":"USD","in_stock":true},{"title":"Ø150 mm – 1 piece","offer_id":57345292403023,"sku":"D1-SNX-4986410","price":24.81,"currency_code":"USD","in_stock":true},{"title":"Ø150 mm – 10 pieces","offer_id":57345292435791,"sku":"D1-SNX-4987410","price":113.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-exzenterpad-medium_125-mm--1-stueck.png?v=1774736564","url":"https:\/\/detiiling1.com\/products\/sonax-profiline-exzenterpad-medium-polierpad","provider":"Detailing1","version":"1.0","type":"link"}