Frost: It's the dirt under the ice that scratches your windscreen. Read the guide

Today: Your screen wants a soft cloth, not glass cleaner. Shop cloths

Storage: Put wheels away clean and sealed for winter. Read the guide

From the blog: Where road salt clings to the underbody. Read the guide

Model Y: What the touchscreen can take when you clean it. Read the guide

Before winter: A paint sealant keeps salt and grime at bay. See sealants

Best seller: COLOURLOCK "Pol Star" cleans fabric, leather and Alcantara. View product

Restock: COLOURLOCK "Fresh Up" neutralises odours in the cabin. View product

Advice: De-icer, cleaner or sealant for your glass? Ask us. Ask on WhatsApp

Shipping: Free DHL shipping in Germany from 89 euros. Shipping info

Support: Where is my order? Tracking, invoice, returns. To the help centre

Buyer protection: Real reviews on Trusted Shops. Read reviews

Stationary grey chain beside the black swingarm — chain spray at Detailing1

Chain lube

(1 products)
Motorcycle chain spray lubricates a prepared drive chain and helps protect against wear and rust. Choose between a visible white coating, transparent care and a formula expressly limited to motorcycles up to 125 cm³. Suitability for the chain, a thin application to its inside and the relevant waiting time matter just as much as the prescribed subsequent maintenance.

Display
View as

  • Choosing motorcycle chain spray to suit your maintenance routine

    Motorcycle chain spray lubricates a prepared drive chain and helps protect it against wear and rust. Choose according to chain type, the coating you want to see and the maintenance instructions. White motorcycle chain lubricant, transparent formulas and a spray specifically intended for 125 cc bikes differ in application and subsequent care.


    Motorcycle chain spray is a lubricant for the drive chain, applied precisely to its clean, dry surface. Depending on the product, it leaves a white or transparent coating. This external care supplements the prescribed maintenance; it replaces neither a chain cleaner nor checks on tension and wear. The spray's stated suitability and the vehicle and chain manufacturers' instructions are what matter.

    Three S100 cans beside the parked white motorcycle — chain spray at Detailing1

    Detailing1's tip from the shop: Allow at least 1 hour between application and your next ride. The S100 sprays compared here require this waiting time on a clean, dry chain. Prepare the motorcycle in good time, away from hot surfaces and sources of ignition. This avoids finishing your maintenance with a hurried departure immediately after spraying.

    Chain lubricant lubricates the chain and does not replace cleaning

    A suitable lubricant belongs on a prepared drive chain, while stubborn dirt, old residues and any visible mechanical defect need separate attention beforehand.

    Spray application makes maintenance accessible because you can distribute the product precisely along the chain. However, it does not replace removing a dirty old coating. If you repeatedly spray over it, the contamination remains part of the application. For this preceding step, you need a cleaner suitable for the type of chain.

    O-, X- and Z-rings are seals used in certain chain designs. Stated compatibility with these seals helps you select a suitable maintenance product. It does not tell you whether you can also treat fairings, tyres or brakes with it. Check the information for the chain actually fitted, rather than assuming every accessory is suitable based on the motorcycle model alone.

    In S100 formulas for which the manufacturer provides the relevant information, you will also encounter PTFE as a lubricant component. This does not mean that the finished sprays consist of that substance alone. According to the manufacturer, Dry Lube also combines grease and dry lubrication. A transparent appearance therefore means neither that nothing remains on the chain after drying nor that the can contains no solvents.

    Corrosion protection means protection against rust. Maintaining the intended level of care also depends on checking the chain and planning reapplication according to use and product instructions. A spray's name alone cannot replace this routine. After a demanding ride, an earlier inspection may be useful or required by the manufacturer.

    Complete chain care therefore includes cleaning, lubrication and the technical checks specified in the handbook. A can of spray does not automatically correct tension that has been set incorrectly, nor does it replace missing seals. Keeping these tasks separate helps when shopping: choose a lubricant for its intended maintenance purpose and the remaining tools for their respective jobs.

    Choose the right formula according to appearance and maintenance instructions

    Compare the visible coating, intended vehicle use and subsequent care, because similar spray cans do not automatically share the same intervals or suitability for your motorcycle.

    White S100 is a straightforward choice if you want to see which areas you have treated while applying a thin layer. It requires a clean, dry chain and enough time before your ride. The visible colour provides a guide; it is not a measuring device indicating a particular thickness or a guaranteed remaining service life.

    Dry Lube suits a transparent appearance. Its dry, flexible coating looks different from a white application. What matters is following the specific reapplication requirement after longer rides in the rain. If you choose this product, look beyond a chain that appears clean and also consider the conditions of your ride when planning the next treatment.

    The manufacturer positions Dr. Wack "S100" High End Kettenspray 300 ml for demanding use. However, the name does not mean it offers the longest lubrication interval. Its product information specifies approximately 700 km at the latest. Decide according to the intended application rather than automatically inferring less maintenance from the name.

    The 125er spray's suitability includes its restriction to motorcycles up to 125 cm³. Do not extend this stated suitability to a larger machine yourself. The current product information does not specify a mileage interval. This is a good reason to follow your vehicle's maintenance instructions closely and avoid borrowing a figure from another S100 spray.

    ProductSelection featureSubsequent care according to product information
    S100 Weisses Kettenspray 2.0Visible white application traceRe-lubricate after 1,000 km at the latest
    S100 Dry LubeTransparent, dry protective coatingAfter longer rides in the rain or approximately 600 km at the latest
    S100 High EndDescribed as suitable for demanding useRe-lubricate after approximately 700 km at the latest
    S100 125erFor motorcycles up to 125 cm³No mileage interval in the product information; follow vehicle instructions

    These figures do not permit you to exceed a stricter maintenance schedule. The vehicle or chain manufacturer may require shorter intervals and additional checks. All the sprays compared require at least an hour's waiting time after application. Allow for this regardless of whether the remaining coating looks white or transparent.

    Dry Lube sprayed on the stationary lower chain run — chain spray at Detailing1

    A clean chain and safe workspace come before the spray

    Prepare the motorcycle, workspace and chain before lubrication so that you can work safely and apply the spray to a suitable, clean surface.

    Switch off the engine and secure the motorcycle against falling over as instructed in its handbook. Reposition the rear wheel only safely and slowly by hand. Never use the engine to run the chain while cleaning or spraying it. If you cannot support the vehicle safely, seek competent help.

    Work with adequate ventilation and away from sources of ignition or hot surfaces. The information on the can determines the protective measures; these include suitable protective gloves and eye protection. Also protect the surroundings from overspray and released dirt. In particular, lubricant must not reach tyres or braking surfaces, even when they are directly beside the working area.

    Remove old contamination with a suitable chain cleaner, following its instructions. For sealed chains, D.I.D advises against petrol, kerosene, volatile thinners and wire brushes, among other things. An arbitrary household product with strong degreasing properties is therefore not automatically a suitable alternative. Suitability for the specific chain remains decisive.

    A suitable chain brush can assist cleaning if its use is appropriate for the chain type. Work in a controlled way on a stationary chain and keep clear of the points where the chain engages with the sprockets. More force is not a good answer to stubborn deposits. Follow the cleaner and tool instructions instead.

    Allow the cleaned chain to dry completely before applying lubricant. Take the opportunity for a visual inspection: noticeable rust, stiff links or missing seals need a competent assessment. Do not ignore residues in the surrounding area either. However, removal, tension and wear limits are governed by the specific vehicle instructions, not a universal measurement in millimetres.

    Apply a thin layer to the inside and allow it to dry before riding

    Shake the can and distribute the suitable spray sparingly over the inside of the clean, dry chain, then observe the specified waiting time.

    The inside is the side of the chain facing the front and rear sprockets. This is where the product information specifies targeted application. Aim the spray tube so that you reach this surface, rather than spraying broadly towards tyres or fairings. An accessible working area is more helpful than a wide cloud of spray around the chain.

    On cans equipped with one, unfold the spray tube. The manufacturer describes a targeted spray head for White, High End and Dry Lube; check the actual can in front of you. Distribute the product sparingly and evenly. A universal number of spray bursts would not be a reliable instruction without knowing the chain length and delivery rate.

    With the engine switched off, slowly reposition the rear wheel by hand to reach the remaining sections of chain. Keep fingers, cloths and clothing away from the points where they could be drawn in. Spraying and changing your grip must remain controlled. Easy access to the chain drive is no reason to use the engine to power it during this work.

    The waiting time begins after application. All the S100 products compared require at least an hour; White, High End and 125er specify ideally overnight. Do not mistake a surface that looks dry for permission to ride away immediately. A shorter general recommendation on a forum does not replace the specific instructions on the can.

    Before riding, check whether lubricant has reached any safety-critical surfaces during the work. If tyres or braking surfaces are contaminated, do not simply ride away; have the condition properly rectified. Close and store the can as directed on the label. Completed maintenance therefore includes a final inspection and clearing up, not just the last burst of spray.

    Stationary grey chain beside the black swingarm — chain spray at Detailing1

    Plan re-lubrication and cleaning as separate steps

    Schedule the next inspection according to the product, riding conditions and maintenance plan, because re-lubrication and thorough cleaning are different tasks within reliable chain care.

    The manufacturer's instruction to reapply the white spray after 1,000 km at the latest is a product-specific upper limit, not a promise for every ride. The same applies to approximately 700 km for High End. Also consult the motorcycle and chain instructions. A shorter interval prescribed there takes priority over a figure in a general shopping comparison.

    For Dry Lube, a longer ride in the rain is explicitly a reason for prompt reapplication. Approximately 600 km is therefore not the only condition. When caring for the chain after such a ride, continue to observe the requirement for a clean, dry starting surface. Moisture and dirt do not become irrelevant because treatment is due promptly.

    White, High End and 125er require cleaning after three lubrication applications at the latest. Record your maintenance if necessary so that you do not confuse this limit with the number of rides completed. Of course, you should not deliberately leave a heavily contaminated chain untreated until then. Checking its condition remains part of the routine.

    Switching between white spray and Dry Lube also begins with suitable cleaning. Do not simply apply the new formula over an unknown old mixture. You want to benefit from the properties of the chosen product and be able to assess its coating. The relevant product and chain instructions determine which cleaning method is suitable.

    Appearance alone does not provide a complete maintenance schedule. A remaining white trace does not prove any particular duration of protection, and a transparent chain is not automatically neglected. Combining a recorded maintenance date, riding conditions and technical inspection is useful. This turns an occasional spray application into a routine you can repeat reliably.

    Recognise limits and avoid unwanted residues

    Motorcycle chain spray serves its purpose through suitable selection and controlled maintenance, while excessive application and overlooked wear do not disappear under another coating.

    If a lot of lubricant collects around the chain, check the quantity applied, cleanliness and waiting time. A thick white layer is not proof of quality in itself. Follow the manufacturer's sparing dosage at the next treatment and check whether the jet actually reaches the intended area. This is more useful than expecting absolutely no fling-off regardless of the quantity applied.

    Independent tests therefore distinguish between several properties. The joint KÜS/MOTORRAD comparison in 2020 assessed lubrication, fling-off behaviour, dirt pick-up and corrosion protection separately, among other criteria. The white S100's test win at the time does not establish universal superiority in every individual category and is not a new test of all formulas sold today.

    Material compatibility also remains specific. That test identified limitations on unpainted ABS for the Dry Lube product tested. Suitability for a chain is therefore no reason to treat adjacent plastics as well. Keep the application confined to its intended area and follow the care instructions for any surfaces accidentally wetted.

    Stiff links, missing seals or noticeable wear cannot be reliably repaired by an especially generous round of spraying. Have such findings checked and follow the manufacturer's instructions for any necessary replacement. Setting chain tension also belongs in a separate, properly performed maintenance step. Lubrication and correct mechanical condition need to work together.

    A good final inspection is therefore more practical than having as much visible product as possible: the chain has been cleaned appropriately and treated thinly, the waiting time has been observed, and tyres and brakes are clean. Then record the next maintenance trigger according to your specific formula and handbook. This tells you what matters before your next ride.

    Four S100 chain sprays on the white workbench — chain spray at Detailing1

    Frequently asked questions about chain spray


    Which chain spray suits my motorcycle?

    Check the vehicle and chain manufacturers' instructions and the spray's stated suitability first. Dr. Wack "S100" 125er Kettenspray 300 ml is expressly intended for motorcycles up to 125 cm³. Among suitable formulas, choose according to a white or transparent coating and the required subsequent care. The product name alone does not establish a general ranking.

    How often should I reapply motorcycle chain spray?

    Product and maintenance instructions determine this. Dr. Wack "S100" Weisses Kettenspray 2.0 White / 400 ml specifies 1,000 km at the latest; Dr. Wack "S100" High End Kettenspray 300 ml approximately 700 km. Dry Lube requires reapplication after longer wet rides or approximately 600 km at the latest. Stricter vehicle or chain requirements prevail; these figures are not interchangeable.

    How long must chain spray dry before riding?

    The S100 sprays compared here require at least an hour after a thin application to a clean, dry chain. For White, High End and 125er, the manufacturer specifies ideally overnight. A dry-looking surface does not permit earlier departure. Follow the actual can and check that tyres and braking surfaces remain clean before riding.

    How does white chain spray differ from Dry Lube?

    A white coating is easy to see during application; Dry Lube forms a transparent, dry protective layer. Dr. Wack "S100" Dry Lube Kettenspray Transparent / 400 ml combines grease and dry lubrication. Transparent therefore means neither unlubricated nor solvent-free. Also consider suitability for the specific chain and the explicit reapplication requirement after longer rides in the rain.

    How much chain spray should I apply?

    The compared product information calls for a sparing, even coating on the inside of a clean, dry chain. It does not establish a universal number of spray bursts. Aim the tube precisely and avoid overspray on tyres, brakes and the surroundings. A thick white layer is not evidence of better protection or reduced maintenance needs.

    Can chain spray repair a worn chain?

    No, lubrication does not replace mechanical repair. Missing seals, stiff links, noticeable rust or excessive wear need assessment according to the chain and vehicle manufacturers' instructions. Have uncertain findings checked professionally. Extra lubricant cannot correct chain tension either; adjustment and any necessary replacement are separate tasks governed by the appropriate handbook.


    Apply S100 Weisses Kettenspray safely and sparingly

    This procedure applies to Dr. Wack "S100" Weisses Kettenspray 2.0 White / 400 ml on suitable motorcycle chains. Also follow the specific vehicle, chain and cleaner instructions; other sprays may have different maintenance intervals.

    1. Prepare the motorcycle safely and check the chain

      Check the vehicle and chain instructions and the suitability of Dr. Wack "S100" Weisses Kettenspray 2.0 White / 400 ml. Switch off the engine and secure the motorcycle as instructed. Work with good ventilation, away from ignition sources and hot surfaces, using suitable hand and eye protection. Assess suspect seals, stiff links and wear before maintenance; seek competent advice if the condition is unclear.

    2. Clean appropriately and dry completely

      Remove contamination with a cleaner suitable for the specific chain, following its instructions. Do not use a wire brush or an unverified household cleaner. Work only on a stationary chain, protect tyres, braking surfaces and the surroundings, and allow the cleaned chain to dry completely.

    3. Shake the can and prepare the application

      Shake the can and unfold the fitted spray tube. Aim it precisely at the inside of the chain, the side facing the front and rear sprockets. Ensure that no overspray reaches safety-critical or unsuitable surfaces.

    4. Apply sparingly and evenly to the inside

      Distribute a thin layer of spray over the inside. With the engine off, slowly and safely reposition the rear wheel by hand to reach the remaining areas. Keep fingers, cloths and clothing away from points where they could be drawn in. Never use the engine to drive the chain during this work.

    5. Allow at least an hour to dry

      After completing the application, wait at least an hour before riding. Dr. Wack specifies ideally overnight for this white spray. A surface that looks dry or a visible white trace does not replace this waiting time.

    6. Check before riding and plan the next treatment

      Before riding, check particularly that tyres and braking surfaces remain clean. Do not ride with lubricant contamination; have it properly rectified. Close and store the can as directed on its label. Reapply White after 1,000 km at the latest and clean after three lubrication applications at the latest; stricter chain or vehicle instructions take priority.

Chain lube